Help2type 2TYPE01 bluetooth keyboard User Manual
- June 5, 2024
- Help2type
Table of Contents
Help2type 2TYPE01 bluetooth keyboard
Quick guide to Bluetooth keys
-
Power on:
A: Turn the top Power key to the left once to enter pairing mode with your Andro id phone.
B: Turn the top Power key to the left twice to enter the pairing mode with the iO S phone. -
Shutdown: Turn off the Power key at the top to the far right.
-
Pairing with a smartphone:
A: Press any key once in Android mode. When the green light flashes quickly, use your Android smartphone to search for “help2Type” via Bluetooth and pair the connection.
B: Press any key once in iOS mode. When the green light flashes quickly, use the i Phone to search for “help2Type” via Bluetooth and pair the connection. -
Operate the mobile phone through Bluetooth button:
A: first, change the input method from the smart phone to “Gboard”, and add th e Swiss German keyboard into the > language of the multi-language input in Gbo ard.
B: After setting, you can input the corresponding character to the smartphone ac cording to the screen printing on the Bluetooth button. The symbol of yellow scr een printing is the combination of CMD + letter keys; The symbol for the blue scr een is a combination of fN + letter keys.
For example: Enter “{“, then hold CMD + j. Type “*” and hold fn + M. To turn on k eyboard lights, press and hold CMD + spacebar. -
Charging: Charging is carried out through the charging interface at the bottom connected by the Type-C charging line.
NOTE: This equipment has been tested and found to comply with the limits
for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>