Shangruisi 6S Bluetooth Headset User Manual
- May 15, 2024
- Shangruisi
Table of Contents
Shangruisi 6S Bluetooth Headset
Parameter
| Model | 6S | Type | Headset |
|---|---|---|---|
| Bluetooth | 5.0 | Protoco l | A2DP, AVRCP |
| Frequency Range | 2. 4-2. 4835G | TX power | Class B |
| CVVTM DSP | Support | Effective | l0Mctcr |
| FM Radio | Support | Frequenc y | 87- I0 SM HZ |
| Micro SDffF card | Support | Max support | 32G |
| Speaker material | NdFeB | Specification | 40MM |
| Sens activity | 1 05±3dB | Distortion | :-S l¾ AtlKHz |
| Power To Bear | 30mW | Frequency | 30-16K HZ |
| Resistance | 32 fl | Recognition | Capac itan ce |
| Microphone | Support | Batte ry Capacity | 500mAh |
| Sensitivity | 58 + 3dB | Recognit ion | Capacitance |
| Playing time | 2::8 -1 0 hours | Charge port | USB |
| Standby Time | 2::3 20 hours | Charge time | 2::1 hours |
| Standby power consumption | 0. 5-0. 6 mAh | Charge voltage | 5A |
| Battery Type | Lithium | Temperature | 15°C to 35°C |
Button, interface, switch
Product Operation
About the operation
- Long press and the headset will be turned on. Indicator blue light flashes, which is bluetooth mode.
- The indicator light: bluetooth light indicates Bluetooth/TFcard/FM radio mode; red light indicates low battery/turn off/charging.
Bluetooth connection
- When the headphones are on, the bluetooth mode is the default and the blue indicator light flashes.
- Open your bluetooth on your phone, and find the “6S” on the device and paring then connect and go play.
Equalizer(EQ)
- Long press the M button once to change the sound effect.
- There are 6 audio effects for your choice.
- Original: 3D, HD Vocal, Panoramic Surround, Heavy Bass, Concert, HiFi.
TF Card
- Insert the TF card into the slot, long long-press the M button to switch to reader mode.
- The indicator light will turn blue.
- The system will automatically read the TF card and the music will be played back.
FM Radio
- Long press the M button to switch to the FM mode, and the indicator light will start to flash blue.
- You can hear a hissing sound, which indicates no radio, just press the play button , and the headset will automatically search for radio programs.
- When the blue light stops blinking, the station search is completed. Press the + and – keys to switch to the previous/next radio channels.
Charging
Turn off the headset, use the usb cable to connect the charger/computer/charging bank/etc to charge, and then the indicator light turns red. Built-in battery capacity detecting system with overload protection, you would not have to worry about the impact on the battery. The light automatically goes off, when charging is completed.
- Low battery: The voice assistant will remind you of the low battery, please charge as soon as possible, to meet the needs of the Bluetooth mode.
- Tips: Do not turn on the headset when charging the headset, or else it will lower the quality and the life of the battery.
Warning
- This headset is not waterproof, please keep it away from water and humid environments, for the normal use of the headphones.
- The 6S headphone supports usb cable to charge, do not charge or be connected to another external charging tool with compatible ports.
- Headphones can not be placed for a long time, please charge and discharge once a week, thus extending battery life.
- When it’s charging with a USB cable, please turn off the 6s headset to avoid noise.
- When the headset does not react, tap the reset button, and the headset will back to its original state.
- The reset key is positioned in the 3.5mm audio jack innermost end, please use a small needle into the jack and trigger the reset switch.
- If you have any questions, feel free to contact us at peisen_us2020@sina.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>