tp-link BS2200 Smart Wi-Fi Dimmer Switch User Guide
- July 23, 2024
- tp-link
Table of Contents
tp-link BS2200 Smart Wi-Fi Dimmer Switch
Specifications
- Product Name : Omada Smart Wi-Fi Light Switch, 3-Way Dimmer Kit
- Type Designation: BS2200
- Restricted Substances: Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr+6), Polybrominated Biphenyls (PBB), Polybrominated Diphenyl Ethers (PBDE)
- Unit : % weight
Product Usage Instructions
Setting Up the Device:
- Download the TP-Link Omada app from the App Store or Google Play.
- Follow the app instructions to set up your device.
Safety Information:
- Caution: Double pole/neutral fusing. Please read and follow the safety information provided when operating the device to prevent accidents or damage due to improper use. Operate the product with care and at your own risk.
- Caution: The electrical switch integrated in this product is intended for functional purposes only. De-energize the product at the circuit breaker before servicing to ensure safety.
Explanation of Symbols:
Symbols: The symbols on the product label may vary but can include
indications like Class II equipment, dangerous voltage, caution for electric
shock, energy efficiency marking, and more.
Set Up Device
With the Omada app, you can set up and manage your device easily.
- Get the TP-Link Omada app from the App Store or Google Play.
- Follow the app instructions to set up your device.
Authentication
FCC compliance information statement
- Product Name: Smart Wi-Fi Dimmer Switch
- Model Number : BS2200
Responsible party:
- TP-Link USA Corporation
- Address : 10 Mauchly, Irvine, CA 92618
- Website : https://www.tp-link.com/us/
- Tel : +1 626 333 0234
- Fax : +1 909 527 6804
- E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter. “To comply
with FCC RF exposure compliance requirements, this grant is applicable to only
Mobile Configurations. The antennas used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2024-05-10
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device.
- Do not use the device where wireless devices are not allowed.
- Alert to service person
CAUTION
DOUBLE POLE / NEUTRAL FUSING
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.
Warnings
- Install only in a suitable UL Listed outlet box (suitable dimensions: W > 2.83in./72mm, H > 1.81in./46mm, D > 3.15in./80mm).
- CAUTION – Risk of Electric Shock – More than one disconnect switch may be required to de-energize the equipment before servicing.
- The manufacturer’s assigned screw torque.
- Tighten terminal screws to 13 lbf-in
- Supported specified line number for the thread terminal copper wire: 12AWG 14AWG and 16AWG.
- Operating Temperature: 0 ºC-40 ºC (32°F-104°F)
CAUTION
Electrical switch integrated in this product is only intended for functional
purposes. De-energized the product at the circuit breaker before servicing.
Explanation of the symbols on the product label
Symbols may vary from products
FAQ
Q: What should I do if I encounter issues during the setup process?
A: If you face any difficulties during the setup process, please refer to
the troubleshooting section in the user manual or contact our customer support
for assistance.