MOXA G4302-LTE4-US-T Industrial Cellular Router Owner’s Manual
- July 23, 2024
- MOXA
Table of Contents
MOXA G4302-LTE4-US-T Industrial Cellular Router
Specifications
-
Cellular Interface
-
Cellular Standards: LTE CAT 4, HSPA, UMTS, EDGE, GPRS, GSM
-
Data Rate: 150 Mbps DL, 50 Mbps UL
-
Band Options:
-
EU: LTE B1, B3, B7, B8, B20, B28; UMTS/HSPA B1, B8;
GSM/GPRS/EDGE 900 MHz, 1800 MHz -
AU: LTE B1, B3, B5, B7, B8, B28; UMTS/HSPA B1, B5, B8;
GSM/GPRS/EDGE 900 MHz, 1800 MHz -
US: LTE B2, B4, B5, B12, B13, B14, B66, B25, B26, B71;
UMTS/HSPA B2, B4, B5 -
JP: LTE B1, B3, B8, B11, B18, B19, B21; UMTS/HSPA B1, B19
-
-
SIM Format: Nano SIM
-
Cellular Antenna Connectors: 2 SMA female
-
Ethernet Interface
- Ports: 2x 10/100/1000BaseT(X) RJ45 connectors
-
GNSS Interface
- Bands: GPS, GLONASS, Galileo, BeiDou
- Antenna Connectors: 1 SMA female
-
Input/Output Interface
- Digital Output Channels: 1 relay output (1 A @ 24 VDC)
- Digital Input Channels: 1
- Input Voltage: -30 to +3 V for state 0, +13 to +30 V for state
1
-
Buttons: Reset button
-
USB Interface
- No. of USB Ports: 2
- USB Connector: USB Type A
- USB Standards: USB 2.0
-
Serial Interface
- No. of Ports: 1
- Connector: Serial
- Serial Standards: RS-232, RS-422, RS-485-2w, RS-485-4w
-
LED Interface
- LED Indicators: Ethernet
-
Software Features
- Management: Broadcast Forwarding Configuration Options
Product Usage Instructions
Step 1: Installing the Router
Follow the installation guide provided with the product to securely mount and connect the router to power and network devices.
Step 2: Configuring Network Settings
Access the router’s web interface or CLI to configure network settings such as IP addresses, DNS servers, and security protocols.
Step 3: Establishing VPN Connections
If needed, set up VPN connections for secure remote communications using the provided guidelines in the user manual.
Step 4: Monitoring and Maintenance
Regularly monitor the router’s status and perform maintenance tasks as recommended to ensure optimal performance and security.
Frequently Asked Questions
- Q: How do I reset the router to factory settings?
- A: Locate the reset button on the router and press and hold it for a few seconds until the router reboots. This will reset the router to its factory default settings.
- Q: Can I use the router with multiple SIM cards simultaneously?
- A: No, this router supports a single Nano SIM card at a time. Inserting multiple SIM cards may cause operational issues.
- Q: What is the recommended method to update firmware on the router?
- A: Check the manufacturer’s website for firmware updates and follow the instructions provided in the firmware update guide to ensure a successful update process.
Features and Benefits
- Integrated LTE Cat. 4 modules with US/EU/APAC band support
- Power management support for wake-up time scheduling
- Cellular link redundancy with dual-SIM GuaranLink support
- Supports WAN redundancy between cellular and Ethernet
- Precise GNSS for location-based applications
- Rugged and compact design for harsh environments
- Compact size and smart LED design for easier installation and troubleshooting
- Developed according to IEC 62443-4-2 with Secure Boot
- Visualize OT security with the MXsecurity management software
Certifications
Introduction
The OnCell G4302-LTE4 Series is a reliable and powerful secure cellular router with global LTE coverage. This router provides reliable data transfers from serial and Ethernet to a cellular interface that can be easily integrated into legacy and modern applications. WAN redundancy between the cellular and Ethernet interfaces guarantees minimal downtime, while also providing extra flexibility. To enhance cellular connection reliability and availability, the OnCell G4302-LTE4 Series features GuaranLink with dual SIM cards. Moreover, the OnCell G4302-LTE4 Series features dual power inputs, high-level EMS, and a wide operating temperature for deployment in demanding environments. Through the power management function, administrators can set up schedules to fully control the OnCell G4302-LTE4 Series’ power usage and minimize power consumption when idle to save cost. Designed for robust security, the OnCell G4302-LTE4 Series supports Secure Boot to ensure system integrity, multi-layer firewall policies for managing network access and traffic filtering, and VPN for secure remote communications. The OnCell G4302-LTE4 Series complies with the internationally recognized IEC 62443-4-2 standard, making it easy to integrate these secure cellular routers into OT network security systems.
Highly Integrated Industrial Cellular Routers
- Support for global cellular bands including America, Australia, Europe, Asia, and Japan
- 2 Gigabit ports with managed Layer 2 switch functions
- Supports serial devices with the 3-in-1 RS232/422/485 port
- Supports MXsecurity and MXview One for distributed system and local site management
Defend Against Malicious Threats With Advanced Cybersecurity Features
- Secure boot for system integrity and to protect against tampering attacks
- VPN functionality for secure and encrypted data communication
- Firewall policies to protect the internal network from unauthorized access and DoS attacks
- Network Address Translation (NAT) provides IP privacy between trusted and untrusted networks
- Cybersecurity features based on IEC 62443-4-2
Industrial-grade Reliability
- Dual power inputs for power redundancy
- GuaranLink and dual SIM card support for reliable cellular connectivity
- -30 to 70°C wide operating temperature
- Rugged hardware design suitable for hazardous locations and various industrial applications
MX-ROS Addresses Growing Cybersecurity Threats
Moxa’s MX-ROS (https://www.moxa.com/en/spotlight/portfolio/mx-ros/index) is a software platform for industrial security routers and firewalls. The platform supports the robust security and user-friendly operation of secure routers through simplified web and CLI interfaces. In addition to adhering to IEC 62443-4-2, MX-ROS devices offer a wealth of the latest cross-industry Operational Technology (OT) network management features with each release to safeguard hardware and software.
Specifications
Cellular Interface
| Cellular Standards | LTE CAT 4, HSPA, UMTS, EDGE, GPRS, GSM |
|---|---|
| LTE Data Rate | 20 MHz bandwidth: 150 Mbps DL, 50 Mbps UL |
| Band Options (EU) | -EU(-T) models: |
LTE B1 (2100 MHz) / B3 (1800 MHz) / B7 (2600 MHz) / B8 (900 MHz) / B20 (800 MHz) / B28 (700 MHz)
UMTS/HSPA B1 (2100 MHz) / B8 (900 MHz) GSM/GPRS/EDGE 900 MHz / 1800 MHz
Band Options (AU)| -AU(-T) models:
LTE B1 (2100 MHz) / B3 (1800 MHz) / B5 (850 MHz) / B7 (2600 MHz) / B8 (900 MHz) / B28 (700 MHz)
UMTS/HSPA B1 (2100 MHz) / B5 (850 MHz) / B8 (900 MHz) GSM/GPRS/EDGE 900 MHz / 1800 MHz
Band Options (US)| -US(-T) models:
LTE B2 (1900 MHz) / B4 (1700/2100 MHz (AWS)) / B5 (850 MHz) / B12 (700 MHz) / B13 (700 MHz) / B14 (700 MHz) / B66 (1700 MHz) / B25 (1900 MHz) /B26 (850 MHz) /B71 (600 MHz)
UMTS/HSPA B2 (1900 MHz) / B4 (1700 MHz (AWS)) / B5 (850 MHz)
Band Options (JP)| -JP(-T) models:
LTE B1 (2100 MHz) / B3 (1800 MHz) / B8 (900 MHz) / B11 (1500 MHz) / B18 (800 MHz) / B19 (800 MHz) / B21 (1500 MHz)
UMTS/HSPA B1 (2100 MHz) / B19 (800 MHz)
No. of SIMs| 2 Push-eject tray type
SIM Format| Nano SIM
Cellular Antenna Connectors| 2 SMA female
Ethernet Interface
| 10/100/1000BaseT(X) Ports (RJ45 connector) | 2 |
|---|
GNSS Interface
GNSS Bands| GPS (1575.42 MHz)
GLONASS (1597.52 MHz)
Galileo (1575.42 MHz)
BeiDou (1561.098 MHz)
---|---
GNSS Antenna Connectors| 1 SMA female
Input/Output Interface
Digital Output Channels| 1
Relay output with current carrying capacity of 1 A @ 24 VDC
---|---
Digital Input Channels| 1
Digital Inputs| -30 to +3 V for state 0
+13 to +30 V for state 1
Buttons| Reset button
USB Interface
| No. of USB Ports | 1 |
|---|---|
| USB Connector | USB Type A |
| USB Standards | USB 2.0 |
Serial Interface
| No. of Ports | 1 |
|---|---|
| Connector | DB9 male |
| Serial Standards | RS-232/422/485 |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None Even Odd |
| Baudrate | 300 bps to 921.6 kbps |
| Console Port | RS-232 (TxD, RxD, GND), USB type-C (115200, n, 8, 1)1 |
Serial Signals
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
|---|---|
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
Operation Modes
| Standards | Real COM mode RFC2217 mode TCP Client mode TCP Server mode UDP mode |
|---|
LED Interface
LED Indicators| PWR1, PWR2, STATE, USB, SIM1, SIM2, CELL, LTE, GNSS, SERIAL,
VPN
---|---
Ethernet Software Features
Management| GuaranLink
Power Management
Back Pressure Flow Control LLDP
Syslog
Wireless Search Utility MXview One MXconfig
MXsecurity MRC Quick Link2
---|---
Broadcast Forwarding| IP directed broadcast, broadcast forwarding
Configuration Options| Serial Console1
Web Console (HTTP/HTTPS)
Command Line Interface (CLI) through Serial/Telnet/SSH
Network Protocols| DDNS
DHCP Server/Client SMTP
SNMPv1/v2c/v3 ARP
Telnet TCP/IP UDP
| Remote SMS Control
---|---
Filter| 802.1Q VLAN
Port-based VLAN
Unicast Routing| Static Route
Multicast Routing| Static Route
Routing Redundancy| VRRP
Time Management| NTP Server/Client SNTP
Security Functions
| Hardware-based Security | Secure Boot |
|---|---|
| Password | User-level password protection |
| Authentication | Local database RADIUS |
Access Control List
Firewall
Filter| DDoS
Ethernet protocols ICMP
IP address MAC address Ports
---|---
NAT
Features| 1-to-1
N-to-1 PAT
NAT loopback Double NAT
---|---
IPsec VPN
Authentication| MD5 and SHA (SHA-256)
RSA (key size: 1024-bit, 2048-bit)
Pre-shared Key or X.509 v3 certificate
---|---
Encryption| DES 3DES AES-128 AES-192 AES-256
Concurrent VPN Tunnels| Max. 15 IPsec VPN tunnels
Protocols| IPsec
Power Parameters
Input Current| 0.96 A @ 12 VDC (max.)
0.63 A @ 12 VDC (average)
0.33 A @ 24 VDC (average)
0.18 A @ 48 VDC (average)
---|---
Input Voltage| 12 to 48 VDC
Power Consumption| 7.6 W (typ.)
11.52 W (max.)
| Power Connector | Screw-locked terminal block |
|---|---|
| Reverse Polarity Protection | Supported |
Physical Characteristics
| Housing | Metal |
|---|---|
| Dimensions | 125 x 46.2 x 100 mm (4.92 x 1.82 x 3.94 in) |
| Weight | 610 g (1.34 lb) |
| Installation | DIN-rail mounting |
Wall mounting (with optional kit)
IP Rating| IP403
Environmental Limits
Operating Temperature| Standard Models: -10 to 55°C (14 to 131°F) Wide Temp.
Models: -30 to 70°C (-22 to 158°F)
---|---
Storage Temperature (package included)| -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity| 5 to 95% (non-condensing)
Standards and Certifications
EMC| EN 55032/35
EN 61000-6-2/-6-4
---|---
EMI| CISPR 22, FCC Part 15B Class A
EMS| IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV, Signal: 2 kV
IEC 61000-4-6 CS: 10 V; 150 kHz to 80 MHz
IEC 61000-4-8: 30 A/m
Freefall| IEC 60068-2-32
Hazardous Locations| IECEx4 ATEX4
Class I Division 24
Railway| EN 50121-4
Traffic Control| NEMA TS2
Road Vehicles| E mark E15
Radio Frequency| FCC PTCRB
EN 303 413
Radio| NCC TELEC RCM KC ICID UKCA
Anatel
Carrier Approvals| Verizon AT&T
Cellular Standards| EN 301 489-1/-19
EN 301 489-1/-52
EN 301511
EN 301908-1/-2/-13
---|---
Safety| UL 62368-1
EN 62368-1
Shock| IEC 60068-2-27
Vibration| IEC 60068-2-6
MTBF
Time| -AU(-T) models: 518,722 hrs
-EU(-T) models: 518,722 hrs
-JP(-T) models: 522,186 hrs
-US(-T) models: 521,746 hrs
---|---
Standards| Telcordia SR332
Warranty
| Warranty Period | 5 years |
|---|---|
| Details | See www.moxa.com/warranty |
Package Contents
| Device | 1 x OnCell G4302-LTE4 Series secure cellular router |
|---|---|
| Documentation | 1 x quick installation guide 1 x warranty card |
- We recommend using the Moxa CBL-USBCF9-GY-150 console cable, which can be purchased separately.
- Available in Q2, 2024.
- With the rubber SIM slot cover closed.
- Available in Q2, 2024.
- Available in Q1, 2024.
Dimensions
Ordering Information
| Model Name | LTE Band | Operating Temp. |
|---|
OnCell G4302-LTE4-EU
| B1 (2100 MHz) / B3 (1800 MHz) / B7 (2600 MHz) / B8 (900 MHz) / B20 (800 MHz) / B28 (700 MHz)| ****
-10 to 55°C
OnCell G4302-LTE4-EU-T
| B1 (2100 MHz) / B3 (1800 MHz) / B7 (2600 MHz) / B8 (900 MHz) / B20 (800 MHz) / B28 (700 MHz)| ****
-30 to 70°C
OnCell G4302-LTE4-AU
| B1 (2100 MHz) / B3 (1800 MHz) / B5 (850 MHz) / B7 (2600 MHz) / B8 (900 MHz) / B28 (700 MHz)| ****
-10 to 55°C
OnCell G4302-LTE4-AU-T
| B1 (2100 MHz) / B3 (1800 MHz) / B5 (850 MHz) / B7 (2600 MHz) / B8 (900 MHz) / B28 (700 MHz)| ****
-30 to 70°C
OnCell G4302-LTE4-US
| B2 (1900 MHz) / B4 (1700/2100 MHz (AWS)) / B5 (850 MHz) / B12 (700 MHz) / B13 (700 MHz) / B14 (700 MHz) / B66 (1700 MHz) / B25 (1900 MHz)
/B26 (850 MHz) /B71 (600 MHz)
| ****
-10 to 55°C
OnCell G4302-LTE4-US-T
| B2 (1900 MHz) / B4 (1700/2100 MHz (AWS)) / B5 (850 MHz) / B12 (700 MHz) / B13 (700 MHz) / B14 (700 MHz) / B66 (1700 MHz) / B25 (1900 MHz)
/B26 (850 MHz) /B71 (600 MHz)
| ****
-30 to 70°C
OnCell G4302-LTE4-JP
| B1 (2100 MHz) / B3 (1800 MHz) / B8 (900 MHz) / B11 (1500 MHz) / B18 (800 MHz) / B19 (800 MHz) / B21 (1500 MHz)| ****
-10 to 55°C
OnCell G4302-LTE4-JP-T
| B1 (2100 MHz) / B3 (1800 MHz) / B8 (900 MHz) / B11 (1500 MHz) / B18 (800 MHz) / B19 (800 MHz) / B21 (1500 MHz)| ****
-30 to 70°C
Accessories
Accessories (sold separately)
Antennas
ANT-5G-ASM-03| 3 dBi GSM/UMTS/LTE/5G NR dipole antenna with SMA (male)
connector
---|---
MAT-5G-PA-SM-2-06-3m| 6 dBi MIMO panel antenna with 2 SMA (male) connectors
for cellular applications, 3 m cable
MAT-5G-PA-SM-3-06-3m| 6 dBi MIMO panel antenna with 3 SMA (male) connectors
for cellular and GNSS applications, 3 m cable
ANT-GNSS-CSM-02-3m| 2 dBic GNSS antenna with SMA (male) connector, 3 m cable
Wireless Antenna Cables
A-CRF-SMSF-R3-100| Wireless antenna cable with SMA (male) to SMA (female)
connectors, magnetic base, RG-174 type, 1 m
---|---
A-CRF-SMSF-L1-300| Wireless antenna cable with SMA (male) to SMA (female)
connectors, magnetic base, LMR195 type, 3 m
A-CRF-SMSF-C2-300| Wireless antenna cable with SMA (male) to SMA (female)
connectors, CFD-200 type, 3 m
A-CRF-SMSF-C2-500| Wireless antenna cable with SMA (male) to SMA (female)
connectors, CFD-200 type, 5 m
Mounting Kits
| WK-41-01 | Wall-mounting kit with 1 plate (41 x 144 x 7.5 mm) |
|---|---|
| WK-160-01 | Wall-mounting kit with 1 plate (160 x 89 x 2.0 mm), 4 screws, black |
Software
LIC-MXviewOne-NEW-XN-SR| MXview One node license with customizable node
quantity (minimum 1 node)
---|---
LIC-MXsecurity-NEW-1Y-XN-SR| 1-year MXsecurity license with customizable node
quantity (minimum 1 node)
Moxa Inc. All rights reserved. Updated Feb 27, 2024.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information