MOXA BXP Series Wall Mount Computers Installation Guide
- May 15, 2024
- MOXA
Table of Contents
MOXA BXP Series Wall Mount Computers
Product Information
- Specifications
- Models: BXP Series Embedded Computers
- Version: 1.0
- Release Date: September 2023
- Product Overview
- The BXP Series Embedded Computers are versatile devices designed for various applications.
- They come in different models to suit different needs and requirements.
- Package Checklist
- Make sure to check the package contents upon delivery to ensure nothing is missing or damaged.
- Hardware Overview
- The hardware overview section provides detailed information about the physical components of the BXP Series Embedded Computers, including different models and configurations.
- Front View
- Details about the front view of various models are provided, showcasing the layout and features of each model.
- Rear View
- Information about the rear view of the models, highlighting the ports and connectors available on each device.
- Dimensions
- Dimensions of the different models are listed to help with installation and placement considerations.
- LED Indicators
- A detailed table describing the LED indicators on the front panel of the BXP computers, including their functions and status indications.
Product Usage Instructions
- Installing the BXP Computer
- The BXP computer comes with wall-mounting brackets for installation. Follow these steps:
- Attach the brackets to the computer using three screws on each side as indicated in the diagram.
- Use two screws on each side for mounting the brackets to a wall or cabinet.
- Ensure the device is securely fixed by pushing it downwards after fastening the mounting brackets.
- NOTE: Ensure installation is done by qualified professionals in an area with restricted access for safety reasons.
- Additional Information:
- The package includes six screws for mounting brackets, but four additional screws are required for attaching the brackets to the wall or cabinet (not included).
- Refer to the provided specifications for details on the required screws.
FAQs
- Q: Can I install the BXP computer without using the wall-mounting brackets?
- A: It is recommended to use the wall-mounting brackets for secure installation. Avoid installing the device without proper mounting for safety reasons.
- Q: What should I do if I encounter power errors indicated by the LED indicators?
- A: If you experience power errors or see any abnormal LED indications, contact technical support immediately for assistance.
Overview
- The BXP Series wall-mount computers are powered by an Intel Atom®, Intel® Celeron®, or Intel® Core™ i5/i7 processor.
- The computers come with a rich set of interface options including up to 10 softwareselectable RS-232/422/485 serial ports, up to 10 gigabit Ethernet ports, 4 digital inputs, and 4 digital outputs.
- The communication interfaces are located on the front and rear sides of the product, enabling easy access and expansion for industrial applications.
- A dual-storage design that includes CFast and SD slots enables easy storage expansion.
- The unique battery fastener cover design for the battery slot secures the battery in place and ensures stability in all operating environments.
Package Checklist
Each basic system model package is shipped with the following items:
- BXP Series embedded computer
- Wall-mounting kit
- 2-pin terminal block for DC power
- 10-pin terminal block for DI/DO
- Quick installation guide (printed)
- Warranty card
- NOTE Notify your sales representative if any of the above items are missing or damaged.
Hardware Overview
- Front View
- BXP-C100-C1-T/BXP-C100-C5-T/BXP-C100-C7-T Models
- BXP-C100-C1-8L-T/BXP-C100-C5-8L-T/BXP-C100-C7-8L-T Models
- BXP-C100-C1-8C-T/BXP-C100-C5-8C-T/BXP-C100-C7-8C-T Models
- BXP-C100-C1-2L3C-T/BXP-C100-C5-2L3C-T/BXP-C100-C7-2L3C-T Models
- BXP-A100-E2-T/BXP-A100-E4-T Models
- BXP-A100-E2-8L-T/BXP-A100-E4-8L-T Models
- BXP-A100-E2-8C-T/BXP-A100-E4-8C-T Models
- BXP-A100-E2-2L3C-T/BXP-A100-E4-2L3C-T Models
- BXP-C100-C1-T/BXP-C100-C5-T/BXP-C100-C7-T Models
- Rear View
- BXP-C100-C1-T/BXP-C100-C5-T/BXP-C100-C7-T/BXP-A100-E2-T/BXPA100-E4-T Models
- BXP-C100-C1-8L-T/BXP-C100-C5-8L-T/BXP-C100-C7-8L-T/BXP-A100-E2- 8L-T/BXP-A100-E4-8L-T Models
- BXP-C100-C1-8C-T/BXP-C100-C5-8C-T/BXP-C100-C7-8C-T/BXP-A100-E2- 8C-T/BXP-A100-E4-8C-T Models
- BXP-C100-C1-2L3C-T/BXP-C100-C5-2L3C-T/BXP-C100-C7-2L3C-T/BXPA100-E2-2L3C-T/BXP-A100-E4-2L3C-T Models
- BXP-C100-C1-T/BXP-C100-C5-T/BXP-C100-C7-T/BXP-A100-E2-T/BXPA100-E4-T Models
Dimensions
- BXP-C100-C1-T/BXP-C100-C5-T/BXP-C100-C7-T/BXP-A100-E2-T/BXPA100-E4-T Models
- BXP-C100-C1-8L-T/BXP-C100-C5-8L-T/BXP-C100-C7-8L-T/BXP-A100-E2- 8L-T/BXP-A100-E4-8L-T Models
- BXP-C100-C1-8C-T/BXP-C100-C5-8C-T/BXP-C100-C7-8C-T/BXP-A100-E2- 8C-T/BXP-A100-E4-8C-T Models
- BXP-C100-C1-2L3C-T/BXP-C100-C5-2L3C-T/BXP-C100-C7-2L3C-T/BXPA100-E2-2L3C-T/BXP-A100-E4-2L3C-T Models
LED Indicators
The following table describes the LED indicators located on the front panel of BXP computers.
| LED Name | Status | Function |
|---|---|---|
| Power | Green | Power is ON |
| OFF | No power input or any other power error | |
| Ethernet (10/100 Mbps) (1000 Mbps) | Green | Steady ON: 10/100 |
Mbps Ethernet link
Blinking: Data is being transmitted or received
Yellow| Steady ON: 1000 Mbps Ethernet link Blinking: Data is being transmitted
or received
OFF| No Ethernet connection
Storage (CFast)| Yellow| Blinking: Data is being accessed from the CFast
card
OFF| Data is not being accessed from the CFast card
Installing the BXP Computer
- The BXP computer comes with two wall-mounting brackets. Attach the brackets to the computer using three screws on each side as indicated in the diagram.
- The six screws for the mounting brackets are included in the product package. Refer to the following illustrations for detailed specifications.
- To mount a BXP computer to a wall or cabinet, use two screws on each side for the mounting brackets as shown in the illustration.
- NOTE The four screws for attaching the wall-mounting brackets to the wall or cabinet are NOT included in the product package; they need to be purchased separately.
- The specifications of the 4 screws to be purchased separately are indicated in the diagram.
- After mounting the BXP computer using the wall-mounting kit and fastening the 4 screws to fix the mounting brackets to the wall or cabinet, push the computer downwards to ensure that the device is securely fixed to the mounting surface.
- NOTE This computer is intended to be installed only in an area with restricted access. In addition, for safety reasons, the computer should be installed and handled only by qualified and experienced professionals.
Connecting the Power
The BXP computer is provided with 2-pin power input connectors in a terminal block on the front panel. Insert the power cord wires into the connectors and tighten them to secure the wires in place. Push the power button. The power LED will light up to indicate that power is being supplied to the computer. It should take about 30 to 60 seconds for the operating system to complete the boot-up process.
| Pin | Definition |
|---|---|
| 1 | V+ |
| 2 | V- |
The power input specification is given below:
- The DC power source rating is 12 VDC @ 6.65 A or 24 VDC @ 3.30 A
- A minimum wire gauge of 18 AWG is required.
For surge protection, connect the grounding connector located below the power connector with the earth (ground) or a metal surface.
- NOTE This computer is designed to be supplied by listed equipment rated 12 VDC (max)@6.65 A or 24 VDC (max)@3.30 A, and Tma = 60˚C. If you need assistance with purchasing a power adapter, contact the Moxa technical support team.
- NOTE If using a Class I adapter, the power cord adapter should be connected to a socket outlet with an earthing connection or the power cord and adapter must comply with Class II construction.
ATTENTION
Before connecting the BXP computer to the DC power inputs, make sure the DC power source voltage is stable.
- The wiring for the input terminal block shall be installed by a skilled person.
- Wire type: Cu
- Only use 18-12 AWG wire size and a torque value of 0.5 Nm.
- Use only one conductor in a clamping point between the
- DC power source and the power input.
Connecting Displays
- The BXP computer comes with a VGA and an HDIM display output located on the front panel.
- NOTE For highly reliable video streaming, use premium HDMIcertified cables.
Communications Connections
- USB Ports
- The BXP Series computer comes with 2 USB 3.0 ports and 2 USB 2.0 ports on the front panel.
- An additional 2 USB 2.0 ports are located on the rear panel.
- The USB ports can be used to connect to peripherals, such as keyboard, mouse, or flash drives to expand the system’s storage capacity.
- Serial Ports
- The BXP computer comes with 2 software-selectable RS-232/422/485 serial ports on the rear panel.
- Additional serial ports are located on the front panel. The ports use DB9 male connectors.
Refer to the following table for pin assignments:
Pin| RS- 232| RS- 422| RS- 485 (4-wire)|
RS- 485 (2-wire)
---|---|---|---|---
1| DCD| TxDA(-)| TxDA(-)| –
2| RxD| TxDB(+)| TxDB(+)| –
3| TxD| RxDB(+)| RxDB(+)| DataB(+)
4| DTR| RxDA(-)| RxDA(-)| DataA(-)
5| GND| GND| GND| GND
6| DSR| –| –| –
7| RTS| –| –| –
8| CTS| –| –| –
Ethernet Ports
The BXP computer has 2, 4, or 10 10/100/1000 Mbps Ethernet ports with RJ45
connectors on the front panel. Refer to the following table for the pin
assignments:
| Pin | 10/100 Mbps | 1000 Mbps |
|---|---|---|
| 1 | ETx+ | TRD(0)+ |
| 2 | ETx- | TRD(0)- |
| 3 | ERx+ | TRD(1)+ |
| 4 | – | TRD(2)+ |
| 5 | – | TRD(2)- |
| 6 | ERx- | TRD(1)- |
| 7 | – | TRD(3)+ |
| 8 | – | TRD(3)- |
NOTE For reliable Ethernet connections, we recommend enabling the ports in standard temperatures and keeping them enabled in high/low-temperature environments.
Digital Inputs/Digital Outputs
The BXP computer comes with four digital inputs and four digital outputs in a terminal block. Refer to the following figure for the pin definitions and the current ratings.
Digital Inputs
- Dry Contact:
- Logic 0: Close to Ground
- Logic 1: Open
- Voltage: 0 to 24 VDD Digital Outputs
- Current Rating: 200 mA per channel
- Voltage: 0 to 24 VDC
For detailed wiring methods, refer to the BXP Series Hardware User Manual
SD / CFast Card
The BXP computer comes with two slots for plugging in an SD card and a CFast
card.
To plug in the cards, do the following:
- Remove the two screws that secure the slot cover
- Remove the cover and locate the SD and CFast card slots.
- Insert the SD and CFast cards in the designated slots. Refer to the image printed beside the slots for the correct direction to insert the cards. When the cards are successfully inserted, you will hear a click.
- To remove the cards, simply push them in to release them and take them out.
Replacing the Battery
The BXP computer comes with one slot for a battery on the rear panel of the computer. A lithium battery (3 V / 200 mAh) is preinstalled in the slot.
To replace the battery, do the following:
- Unfasten the two screws on the battery cover.
- Take off the cover. The battery is attached to the slot cover as indicated in the image.
- Unplug the connector of the battery-cover assembly from the internal wire of the slot.
- Remove the two screws on the metal plate attached to the battery holder.
- Place a new battery in the battery holder, replace the metal plate, and fasten the two screws onto the frame to secure the battery.
- Plug in the connector of the battery-cover assembly to the internal wire of the slot.
- Place the battery holder back in the slot and secure it by fastening the two screws on the cover.
Warning
- Be sure to use the correct type of battery. Incorrect batteries may cause system damage. Contact Moxa’s technical support staff for assistance, if necessary.
- To reduce the risk of fire or burns, do not disassemble, crush, or puncture the battery; do not dispose of it in fire or water and do not short external contacts.
Declaration of the Presence Condition of the Restricted Substances Marking
Moxa: +886-3-2737575
- BXP-C100-C1-T
- BXP-C100-C1-T-Win10
- BXP-C100-C5-T
- BXP-C100-C5-T-Win10
- BXP-C100-C7-T
- BXP-C100-C7-T-Win10
- BXP-C100-C1-8L-T
- BXP-C100-C5-8L-T
- BXP-C100-C7-8L-T
- BXP-C100-C1-8C-T
- BXP-C100-C5-8C-T
- BXP-C100-C7-8C-T
- BXP-C100-C1-2L3C-T
- BXP-C100-C5-2L3C-T
- BXP-C100-C7-2L3C-T
Technical Support Contact Information
- www.moxa.com/support.
- 2023 Moxa Inc. All rights reserved.
- P/N: 1802001001010
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>