burotic Desk Drawer Installation Guide
- July 23, 2024
- burotic
Table of Contents
burotic Desk Drawer
Product Information
Specifications
- Drawer — 1x
- Storage Box — 1x
- Rubber Cushion — 6x
- ST4.8×19 Screw — 6x
- ST4.0x12 Screw — 4x
Product Usage Instructions
Step 1: Attaching the Panel
Securely attach the panel to the drawer using four (4) ST4.0x12 screws, inserting them into the pre-drilled holes.
Step 2: Inserting the Storage Box
Insert the storage box into the drawer, ensuring a snug fit, andaffix the rubber cushions securely to the interior of the drawer for added protection and stability.
Step 3: Positioning the Desk Drawer
Make sure that the desk is positioned upside down, not resting on its feet. Place the drawer on the opposite side of the controller, ensuring that the desk’s support fits into the drawer and that the front edge of the drawer aligns perfectly with the desk edge. Using a screwdriver or electric drill, secure the six (6) ST4.8X25 screws into the cushions installed at the screw locations. Ensure a secure fastening under the surface.
FAQ
- Q: What precautions should I take before using the drawer?
- A: Before using this drawer, ensure it is correctly installed according to the manual to prevent accidents. Use gentle operation to avoid injuries and keep children away from it to prevent risks.
- Q: How can I get assembly assistance?
- A: For assembly assistance, you can contact us at burotic.ca/chat, call 1-844-287-6842, or email support@burotic.com.
Caution
Follow each of the steps in this guide to ensure that the desk drawer is properly installed and supported. Please read the instructions before starting the installation. Using the illustrations below, verify that all components required for assembly have been supplied with the order. Do not discard the packaging until the product has performed satisfactorily.
IMPORTANT PRECAUTIONS
Before using this drawer, please review the following precautions to ensure safe and hazard-free usage:
- Proper Installation: Ensure the drawer is correctly installed according to the instructions provided in this manual. Incorrect installation may lead to potential accidents.
- Gentle Operation: Use the drawer smoothly and avoid abrupt movements to prevent finger pinching or entrapment.
- Children: Keep children away from the drawer while in use and ensure they understand the risks associated with improper usage.
By carefully following these safety guidelines, you can fully enjoy the functionality of your drawer while minimizing potential risks.
Parts and materials
Installation Instruction
Step 1
Securely attach the panel to the drawer using four (4) ST4.0x12 screws, inserting them into the pre-drilled holes.
Step 2
Insert the storage box into the drawer, ensuring a snug fit, and affix the rubber cushions securely to the interior of the drawer for added protection and stability.
Step 3
Make sure that the desk is positioned upside down, not resting on its feet.
Place the drawer on the opposite side of the controller, ensuring that the
desk’s support fits into the drawer and that the front edge of the drawer
aligns perfectly with the desk edge. Using a screwdriver or electric drill,
secure the six (6) ST4.8X25 screws into the cushions installed at the screw
locations. Ensure a secure fastening under the surface.
Contact
- 99 Emilien-Marcoux, Suite 107
- Blainville, QC J7C 0B4
- Canadal
- 1-844-BUROTIC
- support@burotic.com
- burotic.com
For assembly assistance, contact us at
- burotic.ca/chat
- call 1-844-287-6842 or
- email support@burotic.com