Kumi SmartBand N8 Smart Bracelet User Guide
- July 22, 2024
- KUMI
Table of Contents
Kumi SmartBand N8 Smart Bracelet
Appearance
Get to Know the Smart Bracelet and TWS Earbuds 2 in 1
- This product is sleek design, with TWS earbuds inside smart bracelet. Slim bracelet body and earbuds. Easy and friendly to use. Comfortable wearing experience.
- This product is with 0.96 inch TFT display.
- To ensure smart bracelet’s battery life, the smart bracelet will stop charging earbuds when battery level is low.
Earbuds Pairing and Connection with Smart Device
- This product comes with two TWS earbuds. One is for Left ear (L) and the other is for Right ear (R).
- Two earbuds already finished pairing in factory. Taken out from smart bracelet, they will begin automatic pair. During this pairing process, at first two earbuds will flash at the same time.
- After a little while one of them will stop flashing. This means they are paired successfully.Then enable BT of your smart device and search for N8. Connect it and you will hear with both of earbuds.
Voice Indication
- There is voice indication when two earbuds are taken out from smart bracelet.
BT Operation Process
- This process needs to be operated when smart bracelet is connected with smart phone for the first time.
Packing list
- Smart Bracelet×1
- Gift Box×1
- TWS Earbud×2
- Charging Cable×1
- User Manual×1
Charging
- Smart bracelet charge: use magnetic charging cable
- TWS earbuds charge: Put earbuds into smart bracelet and smart bracelet will charge earbuds. The charge will disconnected when earbuds are fully charged.
Smart Bracelet Connection Instruction
Basic functions
- Two Stereo TWS Earbuds. Each one can be used independently or together
- Heart rate monitor
- Blood pressure monitor
- Pedometer, Calories
- Sleep monitor, sedentary alert and music
- MSM alert and push
- Selfie
- Find smart bracelet and find mobile phone
APP Download
- For iPhone go to Google Play APP Store to download Lookfit
- For android go to android app market to search Lookfit
- Scan following QR code to download for both of iPhone and android device
BLE Connection with Smart Device
- Go to the LookFit APP＞Device＞Bind Device＞Search and find the name N8-J to connect it. When connected successfully, it will show N8-J in My Device. At the same time, in home menu you will see the connection symbol. If it does not show that symbol, it suggests that it is not connected. All data will syn upon connection.(How to find device name: Go to Setting menu of smart bracelet, long press touch button ◎ go to Information. Long press ◎ and you will see Mac address of your smart bracelet.
- After first successful connection, smart watch will auto connect to smart device when it is within its connection range.
- If LookFit APP want to connect with a second or third smart watch, you must disconnect with previous connected smart watch first.
- Remarks: the connection must be done from the APP, not in Settings of your smart device
Attentions Should Be Paid to When Connecting
- Make sure your smart device BT is on
- Make sure battery level is sufficient. Power on or charge it when necessary.
- Make sure it is within BT range of 50 cm
- In case that you could not find the smart bracelet name N8-J in the APP, please check if your smart device allow LookFit to have access to smart device.
Smart Bracelet Main Functions
Power on/off
- Power on: Long press ◎ for 3 seconds. Screen will go off when no operation for 5 seconds.
- Power off: Go to Settings＞Power off. Long press ◎ for 3 seconds and it will power off.
Watch Face Switch
- On home menu, long press ◎ for 3 seconds and watch face will switch
Pedometer
- Go to Steps menu and long press touch button ◎. And then it will show weekly history of steps. Screen will go off when no operation for 5 seconds.
Calories
- Go to Calories menu to view current calories. Long press touch button ◎ and then it will show weekly history of calories. Screen will go off when no operation for 5 seconds
Distance (KM)
- Go to KM menu to view current distance. Long press touch button ◎ and then it will show weekly history of steps. Screen will go off when no operation for 5 seconds.
Hear Rate Monitoring
- Go to heart rate menu and long press touch button ◎ to start consecutive monitoring of heart rate. Screen will go off when no operation for 5 seconds.
Sport
- Go to sport menu and long press touch button ◎ to enter into sport option (Walking/Outdoor Running/Cycling/Indoor Running/Climbing).Long press again to enter into sport selected option.
- Long press Go back to exit. Screen will go off when no operation for 5 seconds
Sleep Monitoring
- Go to sleep monitoring menu and long press ◎ to check current sleep data.Screen will go off when no operation for 5 seconds.
Blood pressure monitoring
- Go to blood pressure menu and long press ◎ to start monitoring. The testing time range is varied due to wearer’s different physical status-quo. It is normal to take some time. Please keep patient.
- During test, the value will show as —/—. If the data is shown as ×××/×××, please check if heart rate sensor touch close enough to skin and if body gesture is right. Keep body still and relaxed when testing. Data will not store in smart bracelet.
Message Alert/Push
- Smart watch will vibrate and show message on screen when there is incoming message from smart device. The message icon on the screen will be same with the mobile phone APP from where message is push.
- Remind: This function need to be activated in LookFit APP first. You could choose what APP (Facebook/Instagram/Twitter/Whatsapp etc.) can push message to smart watch.
Remote to Take Selfie
- Go to More menu＞Photo. Long press ◎ to take photo.Screen will go off when no operation for 5 seconds.
Find Smart Phone
- Go to More menu＞Find phone. Long press ◎ to find mobile phone.Mobile phone will vibrate and sound to remind you where your phone is left. Screen will go off when no operation for 5 seconds.
Music
- Go to More menu＞Music. Long press ◎ to control music play/pause, next/previous song.Screen will go off when no operation for 5 seconds.
Find Smart Bracelet
- In LookFit APP there is a function to find smart bracelet. Click that Find Device option and the smart watch will vibrate for 3 to 5 seconds so as to remind you where the smart bracelet is.
Alarm Clock
- On Alarm Clock menu, different alarms (time and repetition day) could be set. Click to view all Alarm Clock that already set.
Sedentary Alert
- This function need to be enabled first in LookFit APP settings. When smart bracelet detects wearer sit still for a certain time, it will send alert to wearer.
Settings
- Go to Settings menu and long press touch button ◎.(Brightness/Restart/Power Off/Restore/Information/Go Back) Screen will go off when no operation for 5 seconds.
Weather
- Go to Weather menu to check current weather. Screen will go off when no operation for 5 seconds.
Incoming Call Alert
- When there is incoming call, smart bracelet will show the alert and option. Long press touch button ◎ to select the green answer icon.
- Long press ◎ again and mobile phone will answer phone call. When select red reject icon, long press ◎ to make mobile phone reject the phone call.
QR Code
- In the smart bracelet, there is QR code for downloading APP.
TWS Earbuds Functions Instruction
Touch Operation
- Single touch L: To decrease voice volume
- Single touch R: To increase voice volume
- Double touch L/R: answer/reject phone call or play/pause music
- Trio touch of L: previous song
- Trio touch of R: next song
- Quad touch of R/L: Siri
- Five consecutive touch of R/L: Switch earbud voice indication language between Chinese and English
Indication Light
- Power on indication light: After earbud taken out from smart bracelet, every earbud will automatically power on and flash every one second. It will stop flashing after two earbuds are paired or connected to smart phone.
- Charging indication light: the light is on when charging and off after is fully charged.
Attention
- Do NOT use charging adaptor with charging voltage＞5V and charging current＞2A to charge. Charge time is 90 minutes.
- Do NOT charge when there is water left on surface
- Do NOT use it when submerged, swimming, diving or taking a shower
- This is Not waterproof. Please take it off before washing hands, raining or participating in intense sport activities
- This product is consumer electronics. All data measured is NOT for medical purpose. It is reference for your health only.
- Blood pressure monitor: keep body straight and relaxed. Keep smart bracelet abreast of your heart and silent.
- Earbuds may get damaged or lost when use during intense sport activities.
FAQ
Q: What if fail to upgrade LookFit APP?
A: If LookFit fails to upgrade for first time, re-connect device of smart bracelet then it will remind APP to upgrade.
Q: Why is heart rate (sleeping monitor) data not accurate?
A: Smart bracelet collects data and monitor human body by electronic sensor. It is consumer electronic product and inevitably there is some difference in data. Please be objective of data collected by this product.
Q: How to set APP access?
A: For Android device, go to Settings＞Access management＞LookFit, and set it as trusted APP. 1. If your smart device install some APP manager, please set LookFit to white list APP
Q: What if earbuds do not have voice even there is incoming alert on smart bracelet in answering phone call.
A：There may be some deter during TWS earbuds. It may be as well to answer the phone when it buzzer for a few times. If the call is answered by the phone, please check if use the phone speaker or BT to answer the call.
Q: I could not hear voice when I am wearing earbuds?
A: Please make sure earbuds and smart device are within effective range and connected.
Read User Manual Online (PDF format)
Loading......