KUMI KU6 Smart Watch User Guide
- June 13, 2024
- KUMI
Table of Contents
KUMI KU6 Smart Watch
Thank you for choosing KUMI.You can read this manual to fully understand the use of the device. This device is mainly connected to the mobile phone through Bluetooth for adaptation, providing a variety of practical functions and services to facilitate your operation of the mobile phone, and has developed many human movements and healthy functions. This device is not a medical device, and the measurement data and results are for reference only, not as a basis for diagnosis and treatment. The company reserves the right to modify the contents of this manual without prior notice.
FUNCTION DESCRIPTION OF WATCH KEYS
Digital crown:
- Long press for 5 seconds–switch on/switch off
- Short press: enter/return the menu
- Double click: change the menu style in function menu
- Rotate the crown:
- Change the dial on the watch face
- Scroll/Zoom the function menu in the function menu interface
WATCH CHARGING AND ACTIVATION
Attach the magnetic charging wire to the metal contact of the charging port
until the charging indication appears on the watch display. When the watch is
low, charge. The device is an all-in-one machine
MOBILE PHONE CLIENT DOWNLOAD
Go to the mobile app store and search for “KUMIWear” or scan the QR code below, and follow the prompts to download and install
WATCH CONNECTION BINDING APP
APP binding:
Before binding the watch, make sure that the watch is not bound to other mobile phones. If so, please unbind the watch first
- Method 1: Open APP> Device> Add Device> Start Search> Select “KU6”
- Method 2: Click the code scanning function in the upper right corner of the APP search device page to scan the QR code of the initialization interface on the watch, or slide down the dial interface, open the “Settings” interface in the control center, and enter the QR code page to complete the code scanning binding
Call audio & Media audio:
- Slide down on the dial interface, click the icon , in the control center to open the “Call Audio and Media Audio” interface
- Call audio: Used to answer and make calls (enabled by default after the watch is bound to the APP)
- Media Audio: Used to play music and video sounds on the phone
FUNCTION INTRODUCTION
-
Dial switch
Long press for 2s on the home screen to enter the dial switch interface. Slide right and left to switch the dial for selection and click to select the dial -
Control center
Functional overview: Brightness, music control, undisturbed mode, flashlight, audio modes, settings, system information, and find phone -
Movement data
It displays the step number, distance and calories on the same day. You can set a goal on the App, including step number distance and calories -
Sports
Options for sport patterns: walking, running cycling, mountain climbing, swimming, yoga round-belly machine and basketball, etc.
Click on the icon to start sport
More sport modes can be added via APP -
Sport record
The interface saves the recent 10 pieces of historical sport records. You can view the sport duration, heart rate and calories during the sport -
Heart rate
Enter the interface for heart rate measurement When the green light at the bottom is on it will start measurement. The measurement will be completed within 40s and has a vibration reminder. If prompted for “no watch” wear the watch again -
Call function
This function needs to be connected to audio Bluetooth. When entering the dial, you can enter the phone number as needed, and then dial; long press 7 and 9 on the keyboard for 2s to enter * and # -
Frequent contacts
Frequent Contacts: You need to add them in the frequently used contacts column on the app side. The frequently set contacts will be automatically synced to the device, and up to 10 contacts can be added -
Call records
This function can save the last 10 call records -
Sleep
The interface displays the monitoring result of your sleep on the same day. The data is updated every day. Connect it to the APP and you can upload and save the data synchronously. The device will recalculate the data information for the new day -
Blood pressure
Enter the interface for blood pressure measurement. When the green light at the bot-tom is on, it will start measurement. The measurement will be completed within 30~60s and has a vibration reminder (The measurement is based on PG technology) -
Blood oxygen
Enter the interface for blood oxygen measurement. When the green light at the bottom is on, it will start measurement. The measurement will be completed within 30~60s and has a vibration reminder (The measuremis ent is based on PPG technology) -
Female health
Keep the watch connected to the APP, you can open the female health reminder on the App. you can view the female health reminder information on the watch
Show relevant functions only if the user’s information gender is “female* -
Music
Keep the watch connected to the APP, you can control the pause and start of the mobile phone music player, volume adjustment, and song-switching -
Weather
After you connect your watch with the APP and open the location permission, the weather interface will display the real-time temperature and weather type -
Alarm clock
Keep the watch connected to the APP, you can set a single alarm clock or a cyclic alarm clock. You can set up to 5 alarm clocks -
Stopwatch
Click the Start button for the timing of the start. Click the pause button to timing the pause. Click the reset button to time to zero.It can save up to 99 pieces of data -
Timer
As for the timer function, the user may start quick timing through the system preset time or click the user-defined button to set the time. Click the Start button for the timing of the start.Click the pause button to timing the pause.Click the reset button to time to zero -
Messages
Open messages push on the App and the watch can receive the corresponding message. It can save up to the last 15 pieces of messages -
Find my phone
Keep the watch connected to the APP, and click “Find my phone”. The bell rings on your mobile phone and the watch shows that you have successfully found your mobile phone; If the watch is not connected to the APP, the watch will indicate that it is not connected -
Settings
Setting functions include screen display (dial switch, duration of screen brightening brightness control, duration of screen brightening through palming), language, vibration strength, menu style, battery, QR code and system setting -
Alipay
Scan the code with mobile Alipay binding, click “consent agreement and binding” after successful binding, double-click the
Alipay payment code display after the home screen, can also unbinding
This function is only available in Chinese languages -
Breath training
During Breath training, there were 1 min and 2 min options. The user clicks on the corresponding duration for breathing training.After clicking to start, follow the icon to zoom in and inhale, shrink and exhale -
Drinking reminder
You can open this function through [device> drinking reminder] on the App After it is opened, you can set the start time, end time and reminder interval -
Sedentary remin
You can open this function through [device> sedentary reminder] on the App After it is opened, you can set the start time, end time and the period for Do Not Disturb -
NFC
Use the watch as a smart access card, open the door lock administrator mode according to the smart door lock user manual, and add/delete the watch screen near the NFC sensing area of the door lock according to the manual or the door lock voice prompt (some door locks do not support third-party access cards, please consult the official customer service of the smart door lock brand for details); Please enter the access card at the community management office. -
Voice assistant
After connect with voice Bluetooth successfully, click the voice assistant in watch menu,input voice commands according to prompts.You can control your phone through the voice assistant
FREQUENTLY ASKED QUESTIONS
Fail to start the watch Press the power switch for more than 3s Maybe the battery level is too low. Please charge the battery timely
The Bluetooth is not connected or cannot be connected
- The Bluetooth is not connected or cannot be connected
- Please restart the mobile phone Bluetooth and connect again.
- Do not connect your mobile phone to other Bluetooth device at the same time
The measurement of heart rate/blood oxygen is inaccurate
- In general, it is caused by poor contact between the watch sensor and human body
- Please ensure that the sensor contacts the wrist well during measurement
- Please keep your body still and the watch attached to your wrist tightly during measurement
Sleep data is not accurate enough
- Sleep monitoring simulates the status of natural sleep and getting up of human, and you should wear it as usual
- If you sleep too late or you do not wear the watch until you go to sleep, there may be some error
- It does not monitor the sleep data during the daytime. The default time for sleep monitoring is from 9:30 in the evening to 12:00 at noon on the next day
For more frequently asked questions, please check the App[My>FAQ] or send an email to our customer service email [email protected]
LEGAL STATEMENT
- Copyright © KUMI Technology Co., Ltd. 2023 All rights reserved
- The company has the right to modify any information in this manual at any time without notifying any third party, and will not assume any responsibility to the third party for this modification
- Without the written consent of the company, no unit or individual shall extract, copy or use the contents of this manual in other ways without authorization, and shall not disseminate it in any form
- This guide is for reference only and does not constitute a commitment in any form. Products (including but not limited to color, size screen display, etc.) shall be subject to the actual object
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction
FCC ID : 2A2L4-KU6