KUMI GW5 Smart Watch User Guide
- June 13, 2024
- KUMI
Table of Contents
KUMI GW5 Smart Watch
Product Information
The product is a device designed for specific purposes. It is equipped with various features and functions to enhance usability and convenience.
Key Features
- Advanced technology for efficient performance
- Durable and sturdy construction
- User-friendly interface
- Multiple settings and options
- Compact and portable design
Product Usage Instructions
- Before using the product, ensure that it is properly charged or connected to a power source.
- Refer to the user manual for any specific instructions related to initial setup or configuration.
- Turn on the product by pressing the power button located on the device.
- Follow the on-screen prompts or use the control panel to navigate through different settings and options.
- Depending on the intended use, select the appropriate mode or function from the available options.
- Refer to the user manual for detailed information on each mode or function and how to optimize their usage.
- Make sure to handle the product with care and avoid exposing it to extreme temperatures or water.
- Regularly clean the product to maintain its performance and prolong its lifespan.
- If experiencing any issues or difficulties, consult the troubleshooting section of the user manual or contact customer support for assistance.
- When not in use, store the product in a safe place away from direct sunlight and potential hazards.
Thank you for choosing KUMI. You can read this manual to fully understand the use of the device. This device is mainly connected to the mobile phone through Bluetooth for adaptation, providing a variety of practical functions and services to facilitate your operation of the mobile phone, and has developed many human movement and healthy function. This device is not a medical device, and the measurement data and results are for reference only, not as a basis for diagnosis and treatment. The company reserves the right to modify the contents of this manual without prior notice.
FUNCTION DESCRIPTION OF WATCH KEYS
Upper button
- Short press : Open the function menu and return to the dial interface
- Double-click : Double-click the button in the function menu interface to quickly switch the menu style
- Long press
- Long press for 5 seconds to start the machine in the shutdown state
- Press any interface for 3 seconds to wake up the voice assistant
Lower button
Slide down on the dial interface, and open the “Settings” interface in the
control center.
In the “Down key settings,” you can customize the click and long press functions of this button respectively
CHARGE AND ACTIVATE THE WATCH
Align the wireless charger with the back of the watch until a charging prompt
appears on the screen of the watch. When the power of the watch is low, please
charge it in time. The device is an all-in-one machine, and the rear case and
battery cannot be removed
APP DOWNLOAD
Enter the mobile APP store and search for “KUMIWear” or scan the OR code
below, follow the prompts to downlead and install
WATCH CONNECTION BINDING APP
APP binding
Before binding the watch, make sure that the watch is not bound to other
mobile phones. If so, please unbind the watch first Method
- Open APP> Device> Add Device > Start Search> Select “KUMI GW5” Method
- Click the code scanning function in the upper right corner of the APP search device page to scan the OR code of the initialization interface on the watch, or slide down the dial interface, open the “Settings” interface in the control center, and enter the QR code page to complete the code scanning binding.
Call audio & Media audio
- Slide down on the diall interface, click the icon in the control center to open the “Call Audio and Media Audio” interface
- Call audio: Used to answer and make calls (enabled by default after the watch is bound to the APP)
- Media Audio: Used to play music and video sounds on the phone
TOUCH
FUNCTION INTRODUCTION
Dial switch
Long press for 2s on the home screen to enter the dial switch interface. Slide
right and left to switch the dial for selection and click to select the dial
Control center
Function overview: brightness adjustment, settings, find phone, system
information, flashlight, audio mode, do not disturb and power saving mode
Movement data
It displays the step number,distance and calories on the same day. You can set
a goal on the App, including step number distance and calories
Sports
Options for sport patterns walking, running cycling, mountain climbing, rope
skipping, football, badminton and basket ballet Click on the icon to start
sport
Sport record
The interface saves the recent 10 pieces of historical sport records. You can
view the sport duration heart rate and calories during the sport
Heart rate
Enter the interface for heart rate measurement When the green light at the
bottom is on it will start measurement. The measurement will be completed
within 40s and has a vibration reminder. If prompted for “Wear Watch Properly
Please ” wear the watch again
Call function
This function needs to be connected to audio Bluetooth. When entering the
dial, you can enter the phone number as needed, and then dial; long press 7
and 9 on the keyboard for 2s to enter*and#
Frequent contacts
Frequent Contacts: You need to add them in the frequently used contacts
column on the app side. The frequently set contacts will be automatically
synced to the device, and up to 10 contacts can be added
Call records
This function can save the last 10 call records
Sleep
The interface displays the monitoring result of your sleep on the same day.
The data is updated every day. Connect it to the APP and you can upload and
save the data synchro-nously. The device will recalculate the data information
for the new day
Blood pressure
Enter the interface for blood pressure measurement. When the green light at
the bottom is on it will start measurement. The measurement will be completed
within 30~60s and has a vibration reminder The measurement is based on PPG
technology
Blood oxygen
Enter the interface for blood oxygen measurement. When the green light at the
bottom is on, it will start measurement. The measurement will be completed
within 30~60s and has a vibration reminder. The measurement is based on PPG
technology
Female health Keep the watch connected to the APP, you can open the female health reminder on the App. you can view the female health reminder information on the watch
Music
Keep the watch connected to the APP. You can control the pause and start of
the mobile phone music player, volume adjustment, and song switching
Weather
After you connect your watch with the APP and open the location permission,
the weather interface will display the real-time temperature and weather type
Alarm clock Keep the watch connected to the APP,you can set a single alarm clock or a cyclic alarm clock. You can set up to 5 alarm clocks
Stop watch
Click the Start button for the timing of the start. Click the pause button to
timing the pause. Click the reset button to time to zero.it can save up to 99
pieces of data
Timer
As for the timer function, the user may start quick timing through the system
preset time or click the user-defined button to set the time. Click the Start
button for the timing of the start. Click the pause button to timing the
pause. Click the reset button to time to zero ****
Messages
Open information push on the App and the watch can receive the corresponding
message.It can save up to the last 15 pieces of messages
Find my phone
Keep the watch connected to the APP and click ‘Find my phone” .The bell rings
on your mobile phone and the watch shows that you have successfully found your
mobile phone; If the watch is not connected to the APP, the watch will
indicate that it is not connected
Settings
Setting functions include screen display (dials witch, duration of screen
brightening brightness control, duration of screen brightening through
palming), language, vibration strength, menu style, battery, OR code and
system setting
Alipay
Scan the code with mobile Alipay binding, click “consent agreement and
binding” after successful binding, double-click the Alipay payment code
display after the home screen, can also unbinding
Note: This function is only available in Chinese
Breath training
During Breath training, there were 1 min and 2 min options. The user clicks on
the corresponding duration for breathing training.After clicking tostart,
follow the icon to zoom in and inhale, shrink and exhale
Drinking reminder
You can open this function through[device> drinking reminder Jon the App After
it is opened, you can set the start time, end time and reminder interval
Sedentary reminder
You can open this function through [device>sedentary reminder on the App After
it is opened, you can set the start time end time and the period for Do Not
Disturb
NFC
Use the watch as a smart access card, open the door lock administrator mode
according to the smart door lock user manual, and add/delete the watch screen
near the NFC sensing area of the door lock according to the manual or the
door lock voice prompt (some door locks do not support third party access
cards, please consult the official customer service of the smart door lock
brand for details); Please enter the access card at the community management
office.
Voice assistant
After connect with voice bluetooth successfully, click the voice assistant in
watch menu input voice commands according to prompts. You can control your
phone through the voice assistant.
FREQUENTLY ASKED QUESTION
Fail to start the watch Press the power switch for more than 3s Maybe the battery level is too low .Please charge the battery timely The Bluetooth is not connected or cannot be connected
- The Bluetooth is not connected or cannot be connected
- Please restart the mobile phone Bluetooth and connect again.
- Do not connect your mobile phone to other Bluetooth device at the same time
The measurement of heart rate/blood oxygen is inaccurate
- General, it is caused by poor contact between the watch sensor and human body
- Please ensure that the sensor contacts the wrist well during measurement
- Please keep your body still and the watch attached to your wrist tightly during measurement
Sleep data is not accurate enough
- Sleep monitoring simulates the status of natural sleep and getting up of human, and you should wear it as usual
- If you sleep too late or you do not wear the watch until you go to sleep, there may be some error
- It does not monitor the sleep data during daytime. The default time for sleep monitoring is from 9:30 in the evening to 12:00 at noon on the next day
Note: This equipment is not a medical device, the measurement data and results are for reference only, not as a basis for diagnosis and treatment.
LEGAL STATEMENT
Copyright © KUMI Technology Co., Ltd. 2023 All rights reserved.
- The company has the right to modify any information in this manual at any time without notifying any third party, and will not assume any responsibility to the third party for this modification.
- Without the written consent of the company, no unit or individual shall extract, copy or use the contents of this manual in other ways without authorization, and shall not disseminate it in any form.
- This guide is for reference only and does not constitute a commitment in any form. Products (including but not limited to color, size screen display, etc.) shall be subject to the actual object
FCC WARNING
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
- FCC ID: 2A2L4-GW5
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>