Hunan Fn Link Technology 3161A-SL WIFI Module User Manual

Fn Link Technology 3161A-SL WIFI Module
User Manual

Federal Communications Commission (FCC) Declaration of Conformity

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 15.105 Information to the user. (b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a mini-
mum distance 20 cm between the radiator and your body.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands is country-dependent and firmware is programmed at the factory to match the intended destination. The firmware setting is not accessible by the end-user.
The final end product must be labeled in a visible area with the following: “Contains Transmitter Module 2AATL3161ASL” This radio module must not be installed to co-locate and operate simultaneously with other radios in the host system, additional testing and equipment authorization may be required to operate simultaneously with other radio. This LMA has RF shielding and is tested and approved as a standalone configuration, additional evaluation may be required for any system integrated with this radio module. FPC Antenna Type, with the maximum 2dBi, indicated.

Integration Instructions for host product manufacturers

The following items are submitted in support of an application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of Requirements and Checklist. Refer to the KDB for a description of the complete requirements;

investigated. It is applicable to the modular Transmitter
2.| Summarize the specific operational use conditions| This module is a stand- alone modular. If the end product will involve the Multiple simultaneously transmitting condition or different operational conditions for a stand-alone modular transmitter in a host, the host manufacturer have to consult with the module manufacturer
2.| Limited module procedures| Not applicable
3.| Trace antenna designs| Not applicable
3.| RF exposure considerations| This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
3.| Antennas| This radio transmitter 2AATL3161ASL has been approved by Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited from use with this device. Operating frequency band: 2412-2462MHz Antenna type: FPC Maximum Antenna gain: 2dBi
3.| Label and compliance information| The final end product must be labeled in a visible area with the following” Contains
FCC ID: 2AATL3161ASL.
3.| Information on test modes and additional testing requirements| The host manufacturer is strongly recommended to confirm compliance with FCC requirements for the transmitter when the module is installed in the host.
2.10| Additional testing, Part 15 Subpart B disclaimer| The host manufacturer is responsible for compliance of the host system with the module installed with all other applicable requirements for the system such as Part 15 B.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>