Sonoff M5-1C-120W SwitchMan Smart Wall Switch User Manual

Sonoff M5-1C-120W SwitchMan Smart Wall Switch

Product Information

Introduction

This device is a smart physical wall switch. After pairing it with the eWeLink App, you can turn on/off the connected devices via the smartphone wherever you are, schedule it on/off, share it with your families to control together, etc.

Remote Control Features

• Single/Countdown
• Timing
• Voice Control
• Share Control
• Smart Scene

Specifications

Installation Instructions

1. Power off: Install and maintain the device by a professional electrician. Do not operate connections while powered on.
2. Wiring Instruction: Ensure proper wiring and safety measures are followed.
3. Power on: The device will enter Pairing Mode by default. Exit Pairing Mode if not paired within 10 minutes.

Add Device Instructions

1. Matter Pairing: Use a Matter-compatible App to scan the QR code to add the device.
2. eWeLink App Pairing: Download the eWeLink App from Google Play Store or Apple App Store. Follow wiring instructions and power on the device.

FAQ (Frequently Asked Questions)

Q: How do I reset the device?

A: To reset the device, press and hold the button for 10 seconds until the LED indicator flashes rapidly.

Q: Can multiple devices be grouped for simultaneous control?

A: Yes, you can group multiple devices in the eWeLink App for simultaneous control.

Introduction

This device is a smart physical wall switch. After pairing it with the eWeLink App, you can turn on/off the connected devices via the smartphone wherever you are, schedule it on/off, share it with your families to control together, etc.

1. Button
   • Press once: Turn on/off the Device.
   • Press and hold for 5 seconds: The device enters the pairing mode.
2. Wi-Fi LED indicator (Blue)
   • eWeLink Mode
   • Keeps on: The device is online.
   • Flashes twice: LAN
   • Flashes once: Offline
   • Flashes two short and one long: The device is in pairing mode.

Matter Mode

• Keeps on: The device is online.
• Flashes once: Offline
• Flashes two short and one long: The device is in pairing mode.
• Flashes three times: Identify

Matter-compatible ecosystem

Specification

2C: 100-240V ~ 50/60Hz 5A/Gang 10A Total Max

3C: 100-240V ~ 50/60Hz 2A/Gang 6A Total Max

Max. load| 1C: 2200W

2C: 2200W(1-1100W/Gang)

3C: 1320W(1-440W/Gang)

LED load| 1C: 300W/220V, 150W/110V

2C: 300W/220V/Gang, 150W/110V/Gang

3C: 100W/220V/Gang, 60W/110V/Gang

Wireless Connectivity| IEEE 802.11 b/g/n 2.4GHz
Net Weight| 1C(147g) 、 2C(154g) 、3C(156g)
Dimension| 120x74x41.5mm
Color| White
Casing Material| PC V0+CRS
Applicable Place| Indoor
Working Temperature| -10℃~40℃
Working Humidity| 5%~95% RH, non-condensing
Certified Compliance| CE/CQC/RoHS

Executive standard EN 60669-2-1

Installation

1. Power off
   • Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!
2. Wiring instruction
   • To ensure the safety of your electrical installation, either a Miniature Circuit Breaker (MCB) or a Residual Current Operated Circuit Breaker (RCBO) with an electrical rating of 10A（ 1C,2C),6A（3C) must be installed before the M5-120W.
   • Make sure all wires are connected correctly.
3. Power on
   • After powering on, the device will enter the Pairing Mode defaulted during the first use, and the LED indicator flashes in a cycle of two short and one long.
   • The device will exit the Pairing Mode if it is not paired within 10 minutes. If you want to enter this mode again, please long press the button for 5s until the LED indicator flashes in a cycle of two short and one long, and then release.

Add device

Method 1: Matter Pairing

• Open a Matter-compatible App ( e.g. Alexa App, Google Home App, or Apple Home App, etc ) to scan the Matter QR code on the Quick Guide or the device itself to add the device.

Method 2: eWeLink App Pairing

1. Download the“eWeLink”App
2. Add device
   • Enter“Scan
   • Scan the QR code on the device
   • Please follow the wiring instructions to connect the wires (ensure power is disconnected in advance and consult an electrician if needed)
   • Power on the device
   • Long press the button for 5 seconds
   • Check the Wi-Fi LED indicator flashing status (Two short and one long）
   • Select“Add Device”
   • Search for the device and start connecting
   • Select the “Wi-Fi” network and enter the password.
   • Device“Added completely”.

Device Network Changing

• Change the device’s network by “Wi-Fi Settings” in the “Device Settings” page on the eWeLink App.

Device Factory Reset (Dual Ecosystem)

• After “Delete the Device” in the eWeLink App
• For devices previously successfully added to eWeLink, perform a new pairing using a different eWeLink account
• For devices previously successfully added in Matter, perform a new Bluetooth Pairing through Matter

FAQ

Fail to pair Wi-Fi devices with the eWeLink APP

1. Make sure the device is in pairing mode.
   • The device will automatically exit the pairing mode if not paired within 10 minutes.
2. Please turn on the location service on your mobile phone and give permission.
   • Before choosing the Wi-Fi network, the location service should be turned on and permission is given. Location information permission is used to obtain Wi-Fi list information. If you tap “Disable”, the device will not be added.
3. Make sure your Wi-Fi network runs on the 2.4GHz band.
4. Make sure you entered the correct Wi-Fi SSID and password, with no special characters contained. A wrong password is a very common reason for pairing failure.
5. You may get the device close to the router for a good signal transmission while pairing.
6. Please try to pair the device in the compatible mode.

Wi-Fi devices “Offline” issues

• Please check the following issues with the Wi-Fi LED indicator status
• The LED indicator blinks once every 2s means you failed to connect to the router.

1. Maybe you entered the wrong Wi-Fi SSID and password.
2. Make sure your Wi-Fi SSID and password don’t contain special characters, for example, the Hebrew, or Arabic characters. Our system can’t recognize these characters so they fail to connect to the Wi-Fi.
3. Maybe your router has a lower carrying capacity.
4. Maybe the Wi-Fi signal strength is weak. Your router is too far away from your device, or there may be some obstacles between the router and the device so that the signal transmission is blocked.
5. Be sure that the MAC of the device is not on the blacklist of your MAC management.

The LED indicator flashes twice on repeated means you failed to connect to the server.

1. Make sure the Internet connection is normal. You can use your phone or PC to connect to the Internet, and if you fail to access it, please check the availability of the Internet connection.
2. Maybe your router has a low carrying capacity. The number of devices connected to the router exceeds its maximum value. Please check the maximum number of devices that your router can carry. If the number of connected devices exceeds the maximum value, please delete some devices or change to a larger router and try again.
3. Please contact your ISP and confirm our server address is not shielded:
   • cn-disp. cool kit.cc (China Mainland)
   • as-disp. cool kit. cc (in Asia except China)
   • eu-disp. cool kit. cc (in EU)
   • us-disp. cool kit. cc (in US)
   • If none of the above methods solved this problem, please submit your issue via feedback on the eWeLink App.

FCC compliance statement

1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference, and
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Notice

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES‐003(B).
This device complies with RSS‐247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

ISED Radiation Exposure Statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

SAR Warning

• Under normal use conditions, this equipment should keep a separation distance of at least 20 cm between the antenna and the body of the user.
• WEEE Disposal and Recycling Information All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste.
• Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.
• Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.
• Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.

EU Declaration of Conformity

• The manufacturer hereby, declares that this equipment complies with the applicable Directives European Norms, and amendments.
• The full text of the EU Declaration of Conformity is available at the following internet address: https://sonoff.tech/compliance/

WASTE SORTING
Check the provisions of your Municipality.

Separate the components and assign them correctly.

• Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.
• Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
• ZIP code: 518000 Service email:support@itead.cc
• Website: sonoff. tech Made in China

Documents / Resources

| Sonoff M5-1C-120W SwitchMan Smart Wall Switch [pdf] User Manual
M5-1C-120W SwitchMan Smart Wall Switch, M5-1C-120W, SwitchMan Smart Wall Switch, Smart Wall Switch, Wall Switch
---|---

References

• Welcome to OpenResty!
• Welcome to OpenResty!
• Welcome to OpenResty!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>