Hunan Y130 Earbuds User Guide
- July 22, 2024
- Hunan
Table of Contents
Hunan Y130 Earbuds
FAQ
Frequently Asked Questions
- Q: Can the device be used in areas with high RF exposure?
- A: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
- Q: How do I charge the device?
- A: To charge the device, connect it to a power source using the provided charging cable. Ensure the device is powered off during charging.
Connection Method
- Take out the earphones from the charging case and get close to the unclocked mobile phone
- Wait eight seconds and at the time please turn on Bluetooth device on mobile phone
- Search for Bluetooth name “Y130” and click connect
- Auto-connect: If the pairing name of the connected headset has not been deleted on the phone, take out the headset then can automatically connect back
Specification
Earbuds Functions
Left earbuds function – operation method
- Pause/ play music (touch 1 time)
- Next song (touch 2 times)
- Increase volume (touch 3 times)
- Reject call (long press for 2 seconds)
- Voice assistant (long press 1.5 seconds)
- Incoming call (short press)
Right earbuds function – operation method
- Pause/ play music (touch 1 time)
- Previous song (touch 2 times)
- Decrease volume (touch 3 times)
- Reject call (long press for 2 seconds)
- Voice assistant (long press 1.5 seconds)
- Incoming call (short press)
Charging Indicator Status
Precautions For Use
- In daily use, the charging surface of the earphones will be stained with dust and other dirty things. You can use a cotton swab to clean the charging electrical contact surface of the earphones.
- Earphones must be used correctly and in compliance with the requirements, and pay attention to the impact of the use environment on the earphones.
- To ensure a smooth connection, it is recommended that the distance between the mobile phone and the earphones be within 8 meters.
- If the headset fails to connect or has poor communication or other other problems, please disassemble the headset body and its accessories without permission, otherwise the warranty will be void. Do not use a charging head that exceeds the rated ampere and volts to charge the headset.
- In order to ensure that you can use the headset normally, please make sure that the headsets were fully charged.
Warm Prompt
- If your headphones become seriously hot or burned out during charging, check to see if you are using a charging head with a power greater than 5V2A. If so, you need to replace it with a charging head that is less than 5V2A.
- When there is sound from only one side of the left and right earphones, please put the two earphones back into the charging box. The earphones will automatically shut down. Open the phone to find the pairing name, click to cancel Bluetooth pairing, open the charging box, take out the earphones, and approach your unlocked phone. Wait about 8 seconds, turn on the Bluetooth on your phone, search for the Bluetooth pairing name, and click to connect.
- Can’t hear sound from headphones
- Confirm that the headset is in working condition
- Confirm whether the volume of the headphones is appropriate
- Confirm whether the headset is properly connected to the mobile phone
- Confirm that the headset is within the normal working range
- If you hear intermittent sound in the headset: In some places, the signal interference is large, and the Bluetooth headset will interfere with the Bluetooth noise floor. If there is an intermittent situation, go to another place to disconnect and reconnect.
- When the distance between the headset and the mobile phone is more than 8 meters or there are obstacles in the middle, the signal transmission will be affected.
- When there are high-power transmitting equipment nearby, it will affect signal transmission.
- Close space will also affect signal transmission (electronic city, etc.)
Warranty
Warranty card/certificate of conformity
Please keep the warranty certificate and purchase voucher properly, these will be your warranty vouchers. Product warranty (one-year warranty for non-man- made damage)
Maintenance records
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
RF warning statement:
- The device has been evaluated to meet general RF exposure requirement.
- The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>