Montarbo MDI-2P Passive DI-Box User Manual
- June 5, 2024
- Montarbo
Table of Contents
Montarbo MDI-2P Passive DI-Box User Manual
INTRODUCTIONS
Thank you for purchasing a Montarbo product, the Italian company founded in 1962, and since then serving music and audio. The unique and state of the art Montarbo products are designed with the utmost attention to detail and durability. Reliability is in line with the high quality standards and sensitivity to the environmental impact that distinguish the company.
The MDI-2P DI-BOX is mainly used on the stage, for optimal management of unbalanced signal from high-impedance instruments such as keyboards, guitar pick-ups and electric basses. A gain reduction PAD [0, -20, -30 dB] and a GROUND to eliminate any ground return hum can be applied to the two balanced output signals. The front connectors are compatible with both classic 6.3 mm TRS jacks and RCA connectors. It is also possible to take repetitions of the input signals through the convenient THRU connectors on the front panel.
PACKAGE CONTENTS
- 1 x Passive DI-BOX
- 1 x User Manual – Section 1
- 1 x User Manual – Section 2
WARNINGS
This manual warnings must be complied in conjunction with “User Manual –
section 2”.
Please read the manual before using.
Keep this manual handy for future reference.
PRODUCT OVERVIEW
FRONT CONTROL PANEL
-
LEFT/RIGHT PAD
3-position dimming selector [0 dB -20 dB -30 dB] applicable to LEFT and RIGHT channel. -
LEFT/RIGHT INPUT
Unbalanced signal input on connector:
TRS The relevant electrical connections are:
Tip = + “warm” positive
Sleeve = screen or mass
RCA The relevant electrical connections are:
Tip = + “warm” positive
Sleeve = screen or mass. -
LEFT/RIGHT THRU
Unbalanced signal output, repetition of LEFT input, on connector
TRS The relevant electrical connections are:
Tip = + “warm” positive
Sleeve = screen or mass.
BACK CONTROL PANEL
-
4. RIGHT
Balanced signal output on XLR connector. -
5. GROUND
Press this key (LIFT) to interrupt ground connection between input and output. Use this function to solve ground loops or hums. -
6. LEFT
Balanced signal output on XLR connector.
TECHNICAL SPECIFICATIONS
Type | passive DI-BOX |
---|---|
Channels | 2 |
Input connectors | 6.3 mm jack, RCA |
Maximum input level | +1 3dBu/+4 dBu |
Input impedance | 180k4 @PAD=OdB |
Output connectors | XLR |
Frequency response | 20 Hz-20 kHz |
Total harmonic distortion | <0.002%@1 kHz |
Controls | ground lift |
Dimensions (L x H x D) | 172 mmx 42.5 mmx 112 mm |
Weight | 752 g |
SIMPLIFIED EU DECLARATION OF CONFORMITY
The full text of the EU declaration of conformity is available at the
following internet address:
https://www.montarbo.com/downloads/
Please follow all the regulations described in this manual (section 1 and 2). Product features, specifications and appearance are subject to changes without prior notice. AEB Industriale S.R.L reserve the right to make changes or improvements in design or manufacture without any obligation to incorporate such changes or improvements in previously manufactured products
COD. 420120386 REV. 1.2
Contact Us
A.E.B. Industriale S.R.L.
Via Brodolini, 8 – Località Crespellano
40053 Valsamoggia – Bologna (ITALIA)
Tel +39 051 969870
Fax +39 051 969725
www.montarbo.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>