VIKING STAGE LIGHTING VK10 Soli 10 Spot User Manual

: July 23, 2024
: VIKING STAGE LIGHTING

Table of Contents

Viking VK10 Soli 10 Spot
- USER MANUAL
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Viking VK10 Soli 10 Spot

USER MANUAL

Most important: FIRST CHARGE THE FIXTURES FOR 6-8 Hours on the First Charge before use. Plug in Power cord. Turn off Power Switch and Turn off other switch to charge.

Introduction

Unpacking: Thank you for purchasing this product, all products has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact. In the case damage has been found or parts are missing, please contact the manufacturer or your dealer for further instructions. Do not return this unit to your dealer without first contacting.

Introduction: this lighting is a wireless DMX intelligent and battery powered LED par light. This par light is light weight and compact which makes it a great piece for mobile DJ’s and clubs.

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself; doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact the manufacturer or your dealer.

PLEASE recycle the shipping carton whenever possible.

General Instructions

To optimize the performance of this product, please read these operating instructions carefully to familiarize you with the basic operations of this unit. These instructions contain important

Features

Power supply: AC110V-250V
Frequency: 50-60Hz
Power consumption: 15W
Light source: 1pcs 15W high brightness 6 in 1 leds
Lamp life: 6-10 ten thousand hrs
battery: 7.4V 3500MAH
LED angle: 25 degree
Color: 16.7 million kinds of color change
Control channels: 6/10 chs
Control mode: wireless DMX512, IRC, master/slave, sound active (can order wifi APP also)
Automatic model(by function button) : color change, color strobe, color dimmer, color gradual change/color jump change
Operation menu: LCD display
Packing size: 100100130mm
N.W: 1.5kg
G.W: 2kg

Safety Precautions

To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
Do not spill water or other liquids into or on to your unit.
Be sure that the local power outlet match that of the required voltage for your unit.
Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short.
Disconnect from main power before making any type of connection.
Do not remove the cover under any conditions. There are no user serviceable parts inside.
Never operate this unit when it’s cover is removed.
Never plug this unit in to a dimmer pack.
Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall.
Do not attempt to operate this unit, if it becomes damaged.
This unit is intended for indoor use only; use of this product outdoors voids all warranties.
During long periods of non-use, disconnect the unit’s main power.
Always mount this unit in safe and stable matter.
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the point they exit from unit.
Cleaning – The fixture should be cleaned only as recommended by the manufacturer. See “Cleaning” for details.
Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked change in performance
Fuse standard is 2A/250V
Grounded using yellow/green line
The ambient temperature must always be under +35° C

Set Up

Power Supply: Before plugging your unit in, be sure the source voltage in your area matches the required voltage for your light is workable in 100-220V/50~60Hz. Because line voltage may vary from venue to venue, you should be sure your unit voltage matches the wall outlet voltage before attempting to operate you fixture.

Operating Instructions

Operating Modes: You can use this lighting in 5 ways:

Sound activation – The unit will activated by the sound signal.
Static display – The unit will display the color in static way.
Auto Mode – The unit will automatically chase through the different patterns.
wireless DMX control mode – This function will allow you to control the lighting with a standard DMX 512 controller.
Battery powered – This function will allow you to control the lighting independently without any DMX cable

DMX Mode: Operating through a DMX controller give the user the freedom to create their own programs tailored to their own individual needs. This function also allows you to use your fixtures as pattern changing lights.

This function will allow you to control each individual fixtures traits with a standard wireless DMX 512
This lighting use 6/10 DMX channels to operate. Please see “DMX channel and Functions” for the DMX traits.
To run your fixture in DMX mode, set in the fixture via the menu button connections to any standard DMX controller. Set your desired DMX address following the setup specifications that come with your DMX controller.
The unit can automatically recognize the DMX signal once the DMX connection is done.

DMX Linking:

To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example; a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain.

6CH Mode

| Value| Description
---|---|---
CH1| 0| No action
1-255| RED dimmer
CH2| 0| No action
1-255| GREEN dimmer
CH3| 0| No action
1-255| BLUE dimmer
CH4| 0| No action
1-255| WHITE dimmer
CH5| 0| No action
1-255| AMBER dimmer
CH6| 0| No action
1-255| UV dimmer

10CH Mode

| Value| Description
---|---|---
CH1| 0| No action
1-255| RGBAW+UV dimmer
CH2| 0-4| No action
5-255| Strobe from slow to fast
CH3| 0| No function
1-255| Red dimmer
CH4| 0| No function
1-255| Green dimmer
CH5| 0| No function
1-255| Blue dimmer
CH6| 0| No function
1-255| White dimmer
CH7| 0| No function
1-255| Amber dimmer
CH8| 0| No function
1-255| UV dimmer
CH9| 0-4| No function
5-80| Colour macro
81-150| Colour jump
151-220| Colour fade
CH10| 0| No function
1-255| Speed from slow to fast

DMX Address 001-507(6CH) 001-503(10CH)

Mode	DMX	(6CH/10CH)
Auto	Prog Sp00-Sp99

For Battery Function and Charge

The unit has the function of battery powered. The button for battery and charge is set on the rear panel. It is showed as the following picture, and the function is described as below.

power switch
charging indicator
wireless dmx ID code
menu button
MIC
sound
DMX signal

Infrared function

Infrared Mode Infrared (IR) mode allows the product to be controlled with an infrared remote controller. The IRC can remotely set the product to various modes; adjust the color, speed and sensitivity, and set the strobe.

The Par is compatible with the included IRC. To enable use with the IRC, follow the instructions below:

Press < MENU> repeatedly until SET shows on the display.
Press < ENTER> and On (turns on the infrared sensor) or OFF (turns off the infrared sensors shows on the display.
Press < UP> or < DOWN> to select the desired option.
Press < ENTER>.

IRC Operations Be sure the IRC remote is pointing directly at the product and there is nothing in between the remote and the product.

Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:

Press < AUTO> on the IRC.
Press < +> or < -> to choose between the four different auto programs.

To adjust the speed of the automatic program:

Press < SPEED> on the IRC.
Press < %>.
Press < +> or < -> to either increase or decrease the speed of the program.

Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:

Press < SOUND> on the IRC.

To adjust sound sensitivity in Sound-Active mode:

Press < SENSITIVITY> on the IRC.
Press < %>.
Press < +> or < -> to either increase or decrease sound sensitivity.

Manual Color Control
To choose a specific color with the IRC.

Press < MANUAL> on the IRC.
Press any number between < 0> and < 9> to choose your color.

To manually control the RGB percentage:

Press < MANUAL> on the IRC.
Press < R>, < G>, or < B> (red, green, or blue) to choose your color.
Note: The Par light only contains red, green. and blue LEDs The amber, white, and UV color options on the IRC will only operate with fixtures capable of outputting these color lights.
Press < +> or < -> to increase or decrease the percentage of each color.

Miscellaneous Operation
To adjust the strobe rate of the program:

Press < STROBE> on the IRC.
Press < +> or < -> to increase or decrease the strobe rate.
Press < STROBE> again to turn off the strobe.

To choose a fade auto program:

Press < FADE> repeatedly on the IRC to choose between the two auto program fade options

To black out the lights:

Press < BLACK OUT> on the IRC. This will turn off all the lights until the button is pressed again.

Note: The IRC will not respond to any inputs when the Black Out mode is activated If the remote does not respond when a button is pressed, try pressing < BLACK OUT>. You may have inadvertently activated the Black Out mode.

Tip for the battery and charge:

The battery can last for 4-5 hours when all LEDs on after full charge , and can last for more than 6-8 hours on auto running mode. Up to 20 Hours with one color diode on. Results will vary based on brightness of LEDs
It is suggested to charge the battery for at least 4 hours, which will extend the life span of the battery.