QIACHIP KT 05-4 Metal Two Key Remote Instruction Manual
- July 22, 2024
- QIACHIP
Table of Contents
KT 05-4 metal two-key remote control instruction manual
1. Product Parameter
the key technical indexes:
Operating voltage: DC 3-6V
Operating current: 12 mA
Operating frequency: 433 MHz
Emission power: 10 mW
Reference distance: 50 m (open field without interference)
Frequency deviation: ± 0.2 MHz
Transmission rate: 50- -60 KHZ
Appearance dimensions: 60 31 11mm
Oscillation resistance: 270-330K
Encoding mode: 1527 learning code (first key is 1 0001 and second key is 2
0010)
Battery model: CR2016 2 or CR2032 1
Each remote control has its own address code, so the remote control is an
individual, will not cause mutual interference phenomenon.
applied range
Home, shopping mall security alarm; electric vehicle, car, motorcycle vehicle alarms, various door and window controls and other industrial controls.
2. product picture
3. direction for use
- Press the remote control button. The remote control LED light is on, and the code is sent successfully.
4. matters need attention
- When the voltage of the remote control is insufficient, please change the battery in time (when the battery voltage of the remote control is insufficient, the remote control distance generally becomes close).
- When using wireless electronic products, attention should be paid to avoid metal masks, large electronic equipment, electromagnetic field and other strong interference sources, to avoid the remote control and the receiving distance is short or unable to work normally.
- Do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product, and serious damage to the product will also bring hidden dangers to your safety.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>