QIACHIP DT08 Smart Lamp Holder User Manual
- June 13, 2024
- QIACHIP
Table of Contents
QIACHIP DT08 Smart Lamp Holder
Specifications
- Dimensions: 38 mm x 80 mm
- Compliance : FCC Part 15
- Radiation Exposure Limits: FCC compliant for an uncontrolled environment
- Minimum Distance: 20cm between radiator and body
Product Usage Instructions
Safety Precautions
Before using the device, please read and understand the following safety precautions:
- Do not make any changes or modifications to the device that are not explicitly approved by the manufacturer.
- Ensure there is a minimum distance of 20cm between the device’s radiator and your body during operation.
- Avoid exposing the device to liquids or extreme temperatures.
Installation
Follow these steps to install the device:
- Place the device on a stable surface.
- Connect the necessary cables to power the device.
- Ensure there is proper ventilation around the device for optimal performance.
Operation
To operate the device:
- Press the power button to turn on the device.
- Follow the user interface instructions for specific functions.
- Monitor the device for any unusual behaviour and contact customer support if needed.
FAQ
- Q: What should I do if the device stops working suddenly?
- A: If the device stops working unexpectedly, first check the power source and connections. If the issue persists, contact customer support for further assistance.
- Q: Can I modify the device for additional features?
- A : No, any modifications to the device not approved by the manufacturer can void your warranty and may affect the device’s performance and safety.
Specifications
Installation instructions
Installing lamp
-
The device’s default power-on state is “ON” If you want to set it to”OFF”, you need to manually select the power-on state to “OFF” in eWeLink APP.
Please check the following before using the device:
Your phone has been connected to a 2.4G WiFi. -
Your phone system version needs to be Android 5.0/iOS 10 or higher.
-
Your phone must be able to access the APP store and download the APP.
-
If your router has set Mac address filtering, please enter the router settings to turn off it.
Pairing with eWeLink APP Download APP
Connect your phone to 2.4GHz WiFi and turn on Bluetooth. Long press the
pairing button for more than 5 seconds until blue LED indicator blinks twice
quickly and keeps on once to enter pairing mode.
- Open the link APP, tap add a device in the top right corner of the screen
- Select the 2.4G WiFi connected to the phone. Confirm the relevant information and click Next.
- After searching for the device, click on the right to add it.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode(Touch). please try “Compatible Pairing
Mode “to pair. Long press the Pairing button for 5s until the WiFi LED
indicator changes in a cycle of two short flashes and one long flash and
release. Long press the Pairing button for 5s again until the Wifi LED
indicator flashes quickly. Then, the device enters Compatible Pairing Mode.
Tap “+” and select ” Compatible Pairing Mode “on APP. Select Wi-Fi SSID with
ITEAD-** and enter the password 12345678, and then go back to eWeLink APP
and tap “Next”. Be patient until the pairing completes.
Pairing with RM2.4G remote control
- Open the added device and click the settings icon inthe upper right corner.
- Select “eWeLink Remote”
- Follow the prompts for the next step. The LED indicator “flashes once again” means the pairing is successful
Note: If you need to delete the RM2.4G remote control, enter the added interface and delete it.
Features
This device is a WiFi smart switch. Use your smartphone in Turn devices on or off in your home anywhere, set a timer on/off, Share with your family to control and so on.
FCC STATEMENT
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body