QIACHIP KR2201WR WiFi Relay Switch RF433 Tuya Remote Control 433MHz User Manual
- June 6, 2024
- QIACHIP
Table of Contents
QIACHIP KR2201WR WiFi Relay Switch RF433 Tuya Remote Control 433MHz
Safety Warning
- This device is for indoor use only.
- This device should not be exposed to dripping or splashing water or anydanger Sources.
- This device should only be installed by adults.
- Do not install near any heat sources.
- Do not use this device with dimmers.
- Do not use this device in totally enclosed luminaires. Use this deviceinopen luminaires only.
- If this device is much heavier than the one to be replaced , the increasedweight may reduce the mechanical stability of certain luminaires andlampholders and may impair contact making and lamp retention.
- RISK OF ELECTRIC SHOCK：USE IN DRY
- LOCATIONS ONLY. Do not install this device with wet hands.
Wiring Diagram
- Please don’t install with electricity *
Note: RF working modes need to be implemented with QIACHIP brand remote control (transmitter) and controller (receiver / wireless remote control switch). There is no guarantee that remote controls from other brands will work properly.
Operation
Note: The red indicator light indicates that the “smart switch” has entered the state of pairing the remote control.
Manual switch mode description
Without the remote control, pressing the setting button “smart switch” will turn it on, and pressing the setting button “smart switch” will turn it off.
Latch Mode Setting Description (Press the remote control to turn it on,
then press itto turn it off. This mode is suitable for 1 remote control button
to control 1 “smartswitch”)
Setting method: Press the setting button on the “smart switch” twice, the red
indicator light flashes and then lights up; press the button that needs to be
paired on the remote control, when the red indicator light flashes, it goes
out, and the latch mode setting is successful.
Toggle mode setting Description (The same button, press and hold to open,
release toclose.)
Click the Settings button on the receiver once, wait for the LED to light up,
and enter the setting state; then click the button (such as button A) on the
remote control once, when the indicator light on the receiver flashes and goes
out, the toggle mode setting is successful.
Jog mode setting Description (The same key, press and hold to open, release
to close.)
Setting method: Press the code matching button on the “smart switch” 4 times,
the red indicator light flashes and lights up; press the button that needs to
be paired on the remote control, when the red indicator light flashes, it goes
out, and the self-locking mode is set successfully.
Reset:
After pressing the receiver’s learning button 8 times, the receiver clears all
remote control data in its memory. When the receiver’s LED flashes, the reset
function is complete.
NOTE
- Do not wire with power on, turn off the power to wire, and power on after checking and confirming that it is correct.
- When the remote control voltage is low, please replace the battery in time (when the remote control battery voltage is low, the remote control distance will generally become shorter).
- When using wireless electronic products, pay attention to avoiding metal masks, large electronic devices, electromagnetic fields and other strong sources of interference, so as to avoid the short distance between the remote control and the receiver or the failure of normal operation.
- Do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product. In severe cases, it will damage the product and bring hidden dangers to your safety.
How to connect the device to Wi-Fi ?
*The indicator light (Led) shows green that the device is matching the WIFI functionFirst of all :
-
Power on the smart switch and make sure that the phone is connected to the Wi-Fi network inthe 2.4GHz frequency band; turn on the phone’s Bluetooth.
-
Make sure that the device, mobile phone, and router are close to each other.
-
Download and open the App:
Search for “Smart Life” in the App Store or scan the QR code below to download and install the App;
For the first download and use, please click the “Create New Account” button to register;
If you already have an account, click the “Log in with an existing account” button.
-
Reset the smart switch: Press and hold the button on the smart switch for more than6seconds until the LED indicator on it flashes quickly.
-
Open the “Smart Life” APP, click the “+” in the upper right corner to enter the device additionpage, and then select “Auto Scan” (please turn on the Bluetooth function of the phone beforeperforming this operation) to start searching for nearby devices to be added. After discoveringthe device to be added , The icon and name of the device will appear on the APP page or aprompt page will pop up, then please follow the APP prompts to add the device.
After the smart switch is successfully connected to Wi-Fi,LED is always on, you can see the newly added device on the home page of the Smart Life APP.
How to connect to third-party applications such as Alexa and Google
Assistant?
When using a third-party smart speaker to connect, you first need to download
thethird-party APP and register an account, such as Amazon Alexa; then add the
device in the “Smart Life APP”, open the device control page, click the upper
right corner (see the picture below), and then Jump to the device information
page, where you can change the name of the device, andyou can see the details
of the third-party controlled APP supported by the device, select the APPyou
need to connect, such as Alexa, click the icon to enter the binding interface,
and then press The page prompts the operation. (see the figure below)
Product Specifications
Input Voltage: AC 90V-250V 50/60Hz
Max Current: 10A
Max Load Power:
Resistive load: 2200W (AC220V)
Incandescent lamp: 2200W (AC220V)
Inductive load: 500W (AC220V)
Capacitive load: 200W (AC220V)
Energy-saving lamp: 300W (AC220V)
RF working frequency: 433MHz
RF Remote control distance: open area greater than 25 meters
*Scan the QR code toviewthe electronic manual
Warning,
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received.
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits arc
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harn1ful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be dctcnmined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
– increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/fV technician for help.
NOTE: This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of m the radiator your
body. This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>