KODAK PWS-2247 Portable Wireless Speaker User Manual
- July 22, 2024
- Kodak
Table of Contents
KODAK PWS-2247 Portable Wireless Speaker
FAQ
- Q: How do I charge the speaker?
- A: Please use the provided Type-C charging cable to charge the speaker. Ensure it is fully charged before first use and maintain regular charging if not in use for an extended period.
- Q: Can I use the speaker in wet environments?
- A: The speaker is IPX5 water-resistant but avoid using it in damp or corrosive environments to prevent damage.
- Q: How do I switch between modes?
- A: Short press the power button once to switch between BLUETOOTH, Aux, and PC modes.
Please read this manual carefully before operating the speaker
Please keep this manual with you for further reference.
INTRODUCTION AND SAFETY INSTRUCTIONS
INTRODUCTION
Thank you for choosing this product as your source for entertainment!
You can use this item with tablets, laptops and many types of smartphones to
stream music and enjoy hands-free calling. In order to get the best results,
please read this manual before using the product.
IMPORTANT SAFETY INSTRUCTIONS
- Read all warnings.
- Follow all instructions.
- Do not drop, disassemble, deform, modify or insert any objects into this product.
- Do not attempt to repair, modify or disassemble the product yourself.
- For the first use, fully charge the product.
- Please charge the battery once a month if speaker is not used for long time.
- This product does not contain any user-serviceable components and tampering with it may void the warranty.
- Do not clean the product with alcohol, ammonia-based cleaners and abrasive cleaners.
- Do not place this product in contact with any sharp objects as this may cause scratches and operating damage.
- Do not attempt to replace the product battery, it is built-in and is not user changeable.
- Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas.
- Dispose of the product and the product’s battery in accordance with local laws and regulations.
- Avoid using in damp or corrosive environment.
WHAT’S INSIDE
PRODUCT OVERVIEW
- Long press for 2 seconds to Power on/off.
- Short press once: Switch modes between BLUETOOTH, Aux, and PC.
- Default mode is BLUETOOTH mode.
- Short press twice for TWS Connection.
- Short press thrice to disconnect BLUETOOTH pairing.
- Turn clockwise to turn the volume up.
- Turn counter clockwise to turn the volume down.
- Tap once to Pause/Play, Mute/Unmute, answer a call/End a call.
- Tap twice to move to next track.
- Tap three times to move to Previous track.
- Tap and stay for 3S to Reject an incoming call.
- AUX audio input / USB-C charging port.
OPERATION
Power On/Off
- Long press “ ” button for 2 seconds to power on, long press it for 2 seconds again to power off.
BLUETOOTH Connection
Power on the speaker, it will enter BLUETOOTH pairing mode and blue indicator light will start flashing. Select “PWS-2247“ on your BLUETOOTH device and connect. Upon successful connection, indicator light will stop flashing and stay on; speaker will start to play music from your play list. Short press “ ” button three times to disconnect BLUETOOTH connection.
Volume Control
- Turn clockwise to turn the volume up, turn counter clockwise to turn the volume down. When the volume is increased to maximum level you will hear a “Beep” voice prompt.
Touch Panel Operation
- In BLUETOOTH or PC mode, tap once to pause the speaker; tap once again to resume play. Tap twice to move to next track, tap three times to move to previous track. In AUX mode, tap once to mute, tap once again to unmute.
TWS Connection
- Power on two “PWS-2247” speakers. Both speakers will enter in BLUETOOTH mode.
- Short press “ ” button twice on each speaker to enter TWS pairing mode, the two speakers will connect automatically and you will hear a voice prompt once TWS connection is successful. The blue indicator master speaker will keep flashing and the sub-master speaker will stay solid.
- Under connection choose “PWS-2247” from your device list to make BLUETOOTH pairing with the master speaker. Upon successful connection you will hear a voice prompt and music will be played on both the speakers simultaneously.
- To disconnect TWS pairing short press “ ” button twice on each speaker.
Handsfree Calling
- When the Smartphone is paired to the speaker and you receive an incoming call, tap the touch panel once to answer the call and tap it again to hang up. Tap the touch panel and hold for 2-3 seconds to reject the call.
PC Mode
- This speaker has built in high-definition audio decoding sound card. Connect your PC with supplied Type-C data cable, speaker indicator light will turn orange and speaker will start playing music from your PC freely.
AUX
- Plug in AUX audio cable to the speaker, it will switch to AUX mode automatically
MODE
- When the speaker is connected with AUX and PC using Type-C data cable before power on, short press “ ” once to switch modes between BLUETOOTH/AUX.
EQ
- Tap the touch panel to switch between the different equalizer modes.
- Speaker supports Music, Gaming and Movie mode. Default mode is Music mode.
Power Saving
Under below situations, the speaker will power off to save battery power:
- In BT mode, without any connection with any device for 10 minutes;
- In AUX, without any audio signal for 30 minutes.
- Long press “ ” for 2-3 seconds to power on again.
Charging
Only use safety approved Adapters with 5V/2A or higher.
- Please charge the speaker when hearing the low battery prompt voice.
- While the speaker is charging Red indicator light turns on and will turn off when speaker is fully charged.
LED INDICATION
Power On Status| Blue indicator light will power on and enter in BLUETOOTH
mode automatically. It will flash rapidly indicating that the device is ready
to pair.
---|---
AUX| In AUX In mode, indicator light will keep Green.
PC Mode| When connected with PC indicator light will keep Orange
BLUETOOTH
Status
| Indicator light keeps Blue when BLUETOOTH is connected.
Blue indicator keeps flashing if your BLUETOOTH device is out of range or
disconnected, indicating the speaker is in searching status.
Maximum Volume| When the speaker volume is increased to maximum, the indicator
light will flash 3 times quickly.
Tap Control| Indicator light will flash twice quickly to confirm each command.
Charging Status| Red indicator will be on while speaker is charging and will
turn off when speaker is fully charged.
Low battery| Red indicator will flash rapidly when the battery is low.
SPECIFICATIONS
| Wireless Version | 5.0 |
|---|---|
| Format Supports | A2DP/HFP/HSP/AVRCP |
| Battery Capacity | 3.7V/2000mAh |
| Charging Current | 5V/1.5A |
| Playtime | 8~12 hours (50% Volume) |
| Charging Time | 2~3 hours |
| Speaker Unit | 8W x 2 (RMS) |
| Freq. Response | 70Hz-18kHz |
| S/N Ratio: | ≥70dB |
| Product Size | 350 x 68 x 72 mm |
| Product Weight | 568g ±50 |
© 2024 Made in China for Star Glory Ltd
Room 905-907, 9/F., Cheung Sha Wan Plaza, Tower 1, 833 Cheung Sha Wan Road,
Lai Chi Kok, Kowloon, Hong Kong.
The Kodak trademark, logo, and trade dress are used under license from Kodak.
All information contained in this document is subject to change without
notice.
CUSTOMER SERVICE: sales@starglory.com.hk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>