tracer Mobile Super BT User Manual

: July 20, 2024
: Tracer

Table of Contents

Read User Manual Online (PDF format)
Download This Manual (PDF format)

tracer Mobile Super BT User Manual

Precautions

Charger not included.
The charging voltage of the headphone case is DC 5V.
The power provided by the charger must be between the minimum 0.175 W required by the radio device and the maximum 1.5 W to achieve the maximum charging speed.
Please pay attention to the use of high-quality charger or computer port charging for the product, must not use cheap and poor quality charger.
Bluetooth Earphones are affected by the environment and connection distance. Please do not use them in environments with strong electromagnetic interference and radiation.
Please do not put the Bluetooth earphone in the water or beat it, which will cause damage to the product.
If the Bluetooth Earphone is not used for a long time, please charge it monthly to prevent it from starting due to lack of power.
We may upgrade the software, hardware or appearance of this product without notice, please refer to the actual product.

Product specifications:

Battery: 200mAh
Speaker: 40mm speaker
Play music time: 5-6 hours
Wireless range: 10m
Charging time: 1-2 hours
BT 5.1
DC-5V
Maximum Transmitter Power (E.I.R.P) ≤20 dBm
The range of which the device operates: 2400 MHz – 2483,5 MHz

Button Control:

Power on/off: long press for 3 seconds
Play/pause music/accept/end phone calls: one short press
Redial the last call number: two quick press
+ short press for Volume up/long press for Next track
– short press for Volume down/long press for Previous track

Charging:

Charger not included.
The charging voltage of the headphone case is DC 5V.
The power provided by the charger must be between the minimum 0.175 W required by the radio device and the maximum 1.5 W to achieve the maximum charging speed.

Plug the charging cable into the headphones TYPE-C slot and the other end into a computer or other charging USB slot.
The red LED light will stay on when charging the headphones.
The blue LED light will be on when the headphones are fully charged.

Answering a Call:
When there’s an incoming call, the headset will ring.
Briefly press the headphone button to answer the incoming call.
You can also double press the headphone button to decline the incoming call.

Ending Call:
While in a call briefly press the headphone button .

Last number Redial:
Double press the headphone button to redial your last number.

Pairing:
In the state of power-off, press and hold the POWER button for approxi- mately 2 seconds till the red and blue LED lights flash alternately. Then open your phone Bluetooth, refresh the Bluetooth list and find the pairing name— Tracer Mobile Super BT and connect (the blue light flashes once in 5S if the link is successful).
Automatically reconnect: If you have already connected to this Bluetooth head- phones, subsequent power on the headphones then they will reconnect with your phone automatically.
You don’t need to enter the pairing mode for re-connection.
Notice: The headphones will power off automatically in 5 minutes if there is no connection.

The symbol of a crossed-out wheeled bin placed on electronic or electrical equipment, its packaging or accompanying documents means that the product may not be thrown out together with other waste. Used equipment may contain substances with toxic and carcinogenic properties, hazardous to human health and life, and poisoning the soil and groundwater. It is the user’s responsibility to hand over the used equipment to a designated collection point for its proper processing. For more information on recycling of electronic and electrical equipment, please contact your local authorities, waste di- sposal services and the place where you purchased this product. The household plays an important role in contributing to the reuse and recovery of secondary raw materials, including recycling, waste equipment. At this stage, attitudes are formed that affect the preservation of the common good, which is a clean natural environment.