PETONEER PF008 NutriVue Feeder User Manual

PETONEER PF008 NutriVue Feeder

Specifications

• Size: 120x120mm
• Model: PF008
• Power Source: Type-C power socket (4 LR14 backup batteries)
• Storage: Micro SD card slot (supports up to 256GB)
• Connectivity: Wi-Fi

Product Usage Instructions

Meet NutriVue
The NutriVue feeder features various components including the lid, food bucket, micro SD slot, Wi-Fi indicator LED, food status LED, camera, food outlet, desiccant cabinet, and more.

Lid Closing
Lock the lid according to the marked direction to ensure proper closure.

Manual Feeding
Short press the manual feeding button to dispense food instantly. The default quantity is one portion, which can be customized through the app.

Micro SD Card Usage
Insert a Micro SD card for continuous recording or motion detection. Daily activities can be recorded for future reference.

App Connectivity
Download the Petoneer app and connect the feeder to your Wi-Fi network to schedule feeding times and monitor your pet.

Real-time Video Feed
Click on ‘Video’ in the app to watch real-time video footage from the feeder’s camera. Tap the ‘Feed’ icon to dispense food instantly.

FAQ

• Q: What type of SD card should I use with the Petoneer NutriVue Feeder?
  

  • A: It is recommended to use UHS-I Micro SD cards with a Class 10 or above speed class in FAT32 format. The feeder supports SD cards with a minimum storage of 8GB and has been tested up to 256GB.

• Q: How do I install the backup batteries?
  

  • A: Use a screwdriver to open the battery compartment cover at the bottom of the feeder. Insert four LR14 batteries, ensuring correct polarity. Replace the cover and tighten the screws.

• Q: What are some precautions to consider when using the NutriVue Feeder?
  

  • A: Some precautions include using only dry food, placing the feeder indoors away from direct sunlight, avoiding dropping foreign objects into the food hopper, and regularly replacing the desiccant.

Size: 120x120mm

Petoneer NutriVue Feeder User Manual

NutriVue

Model /: PF008
Please read this manual carefully before using. Keep the manual in a safe place for future reference.

Meet NutriVue

Inside the box

Operations

1. Power on the feeder
   Unbox and connect the USB Type-C Cable to the power socket at the bottom of the feeder, then connect the power supply to the wall outlet.
   The power supply is not included; please buy separately!
   When the device is running on batteries, it will automatically disable Wi-Fi, switch to offline mode, and won’t be controllable remotely.

2. Bowl mounting
   Slide the bowl into the feeder’s outlet

3. Lid removing
   Open the lid according to the marked direction, remove the desiccant from the packaging, and place it in the desiccant cabinet

4. Food filling
   Pour food into the hopper and fill it. Pour food into the hopper and fill it .

5. Lid closing
   Lock the lid according to the marked direction

6. Manual feeding
   Short press the manual feeding button to feed instantly.
   (Default quantity is one portion, customizable through the App).

7. Download the Petoneer app and connect the feeder to your Wi-Fi to schedule your feeding.

8. Click Video to watch the real-time video, and tap the Feed icon to feed expressly.

9. Insert a Micro SD card*
   You can choose to record continuously or by motion detection. Daily activities can be recorded to check on in the future.

Micro SD card not included.

Please buy separately.
To consistently achieve the best experience with the Pet Cam, you should use UHS-I Micro SD cards with a Class 10 or above speed class in FAT32 format, or the recording may stop, and the unmatched storage cards may damage the footage.

In addition, the minimum storage of the TF card is 8GB the maximum storage the Pet Cam has been tested at is 256GB.
We recommend only purchasing name-brand microSD cards** through official resellers.

Backup Battery Installation

Use a screwdriver to open the battery compartment cover at the bottom. Put four LR14 batteries inside (note the positive and negative poles), replace the cover and tighten the screws.

Note
You need to buy the batteries separately, and only alkaline dry batteries are supported. Before installing, make sure that there is nothing in the battery compartment. Install batteries for emergency backup in case of power failure.

If the batteries are not used for a long time, please remove them.

Quick Setup

1. Scan the QR code on the right and download the Petoneer app on App Store and Google Play. Click Sign up to get walked through to create your Petoneer account.
2. Power on and ensure the Wi-Fi Indicator LED is flashing slowly, reflecting the device is ready to join the Wi-Fi.
   Open the Petoneer app and click the ‘+’ button and get walked through the SET- UP steps.

Note

1. The feeder doesn’t support the 5GHz Wi-Fi, please make sure your Wi-Fi is 2.4G.
2. If the Wi-Fi indicator is not blinking slowly after power-on, please long press and hold the manual feed button until the indicator blinks slowly.

LED Status and Specification

Model: PF008

| | Power Input: 5V 2A
|
Red light is off| The food is more than 10%| Capacity: 2.6L (1.2kg)

Communication: Wi-Fi (2.4GHz)

| | Range: 98.5 feet (30m)
|
Fast blinking red| The food is less than10%| Dimension: 191191312mm

Net Weight: 1.65kg

Precautions

1. Please use the device indoors and avoid exposing it to direct sunlight, as this can interfere with both the accuracy of the food level monitoring and the quality of the video image.
2. Do not drop anything other than dry food into the food hopper. Otherwise, there is a risk of dysfunction or mistaken feeding;
3. To prevent the feeder from being hit by pets, it is recommended to place the feeder at the corner or against the wall;
4. Please shield or organize the power cord well to prevent the pet from biting the cable and causing dangerous situations such as electric shock;
5. This product is only suitable for DRY FOOD, and WET FOOD is prohibited.
6. It is recommended to replace the desiccant once a month, and do not fall into the hopper, and NEVER use it if it is damaged.
7. The pet food’s shape and density will cause some deviations from the food hopper’s capacity and the feeding unit’s quantity.
8. After each fill-up of the hopper, there may be a deviation of two portions at the initial feeding time. It is recommended to calibrate manually! (Click the manual feeding button until food is fed!)
9. Clean the food passage regularly to get the kibble out smoothly.
10. DO NOT clean the base; please wipe it with a rag instead. After cleaning the other parts, please dry them before reinstalling them.
11. Children must use it under the guidance of adults.

 Warranty Terms

Within the period of warranty, if the product fails with no fault of user operations, it will be repaired at Petoneer’s expense. The warranty will not cover product failure in examples below:

1. Intentional damage to the product by the user or third party
2. Failure to operate or maintain the product following the (QIG) Quick Installation Guide Instructions.
3. Failure by natural wear and tear including but not limited to scratching, corrosion, oxidation and rusting.
4. Failure by non-authorized repair of the product including but not limited to user’s own or third-party repairing attempts or modifications.(All Pictures shown in the manual are for illustration purpose only. Actual product may vary due to product enhancement.）

FCC Instructions

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference byo near more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority too per rate the product.

FCC Radiation Exposure Statement

The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Environmental Conditions
Operating Temperature:32°F to104°F,(0 ºC to 40 ºC)(indoor only)
SkyRC Technology Co., Ltd. declares that this Petoneer NutriVue Feeder(PF008), is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Directive (2014/53/EU).

Environment friendly disposal
You can help protect the environment!
Please remember to respect your local regulations: dispose of nonfunctional electrical equipment with an appropriate waste disposal center.

Manufacturer: Sky RC Technology Co., Ltd.
4, 5, 8 Floors, Building 4, Meitei Science Park, Guanguang Road, Guanylin, Longhua District, Shenzhen, China.

Read all the instructions
When using electrical appliances, basic safety precautions should always be followed, including the following

1. Do not touch hot surfaces. Use handles.
2. To protect against electric shock do not immerse cord, plug into water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
5. Do not operate any appliance with a damaged cord or plug, should the appliance malfunction, or if it has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
6. The use of the accessory attachments is not recommended by the appliance manufacturer as it may cause injuries.
7. Do not use outdoors.
8. Do not let the cord hang over edge of table or counter, or touch hot surfaces.
9. Do not place on or near a hot gas or electric burner, or in a heated oven.
10. Always attach plug to appliance first, then plug cord in the wall outlet.
11. Do not use the appliance for other than intended use.
12. WARNING: Never leave the appliance unattended whilst in use.
13. Warning: keep the supply cord away from heating tip and metal enclosure while using.
14. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety.
15. Children should be supervised to ensure that they do not play with the appliance.
16. If the SUPPLY CORD is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
17. WARNING: This tool must be placed on its stand when not in use.

SAVE THESE INSTRUCTIONS.

Manufacturer: SkyRC Technology Co., Ltd.
Address: Floors 4, 5, & 8, Building 4, Meitai Technology Park, Guanguang South Road, Guanlan, Longhua District, Shenzhen, China

The device has been approved for use in EU countries and is therefore provided with the CE mark. All necessary documentation is available on the website: www.electric-collars.com Changes to technical parameters, properties and printing errors reserved.

Service center and distribution

• Reedog, sro
• Sedmidomky 459/8 101
• 00 Prague 10
• Phone: +1 646 980 4569
• Email: info@electric-collars.eu

References

• ★☆ Electronic training collars for dogs ☆★ - Electric-Collars.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>