DONGGUAN H186 Selfie Stick Instruction Manual

DONGGUAN H186 Selfie Stick

Product Information

Specifications

• Compliance: Part 15 of FCC Rules
• RF Exposure: General exposure requirement met
• Usage: Portable exposure condition without restriction

Product Usage Instructions

FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Modifications
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure
The device has been evaluated to meet general RF exposure requirement. It can be used in portable exposure condition without restriction.

FAQ

Q: Can I make modifications to the device?
A: No, any changes or modifications not approved could void your authority to operate the equipment.

Use Instructions

Product specifications

• Product Name: Multi-function Bracket
• Clamping phone width: 68-90mm
• Support phone size: 4.7-7 inches
• Remote control specifications
• Battery model: 401020 polymer (rechargeable battery) INPUT: 5V 500mA
• Battery capacity: 50mA
• Charging current: 50mAh
• Full charge time: 1-1.5 hours
• Bluetooth version: 5.0
• Bluetooth name: C666
• Fill light parameters (optional)
• Battery capacity: 400mAh
• LED number of gears: White 3rd gear, Warm 3rd gear
• White + Warm 3rd gear
• LED color temperature: White, Warm, White+Warm LED bead specification: 2835/34PCS
• INPUT: 5V 1A

Operation guide

1. Power on: Long press the power button, the blue light will flash quickly for 3 seconds to indicate that the device has been turned on, and the blue light to flash slowly means to enter the search state.
2. Bluetooth connection: Open the Bluetooth of the mobile phone and search for “C666”, click to connect, and the indicator light will turn off after connectted.
3. Take photos: When the remote control is connected to the phone, click the camera button, and the indicator light will flash and take a photo.
4. Dis connect shutdown: The remote control has no operation in the non-connection state, and it will automatically power off in about 10 minutes. Connected shutdown: When the remote control is connected to the mobile phone, if there is no operation for about 5 minutes, it will enter the sleep state. If there is no operation for another 5 minutes,
5. it will automatically shutdown.
6. Wake up the remote control: After entering the sleep state, press the camera button once to connect the phone back.
7. Power off: In the power on or sleep state, long press the camera button for 3 seconds, and the indicator will flash and then turn of, indicating that it has been turnes off.
8.  Return-connection function: The remote control has a memory connection function, when the Bluetooth is turned on, the remote control will automatically connect to the mobile phone that has been matched.

The use of tripod

Normal Environment: Open outward at the position of the handle to change to tripod mode.

Soft environments such as mud floors:
The counterweight bar is changed to a removal and installation method that inserts soil to secure the bracket.

Access to the remote control
Press the lock button 1 (as shown in the figure}, and pull the handle back 2 (as shown in the figure) until the remote control is taken out for any shooting use.

The installation of the fill light (Lights are optional)
Aligns the socket of the fill light with the port on the bracket, and after insertion, press the switch to make up the light.

360° swivel and stable gimbal shooting method
The shooting image will be stable and smooth, which can effectively eliminate the shake, and easily shoot a panoramic blockbusters.

Use the remote control for video recording
This remote control only supports the video recording function of the mobile phone camera, and does not support it for the time being Live APP video recording function.

Operation method

1. Connect the Bluetooth remote control to your phone.
2. Enter the phone’s built-in camera or download other camera APP software.
3. Switch to the video interface.
4. Click the remote control button to record the video.
5. Click the button again to end the video recording.
6. Usage status: blue light flashes, turns off after connecting the mobile phone, click to take a photo, Flashing.
7. Charging status: red light is always on, fully charged. Turn off the lights.

Mode of operation

1. Remote control, effective distance 10 meters
2. Tripod mode
3. Handheld mode

Solution to the problem of the remote control failing to connect to the

phone

1. Turn on the Bluetooth of the mobile phone and erase some of the paired devices .
2. Turn off the mobile phone and restart.
3. The Bluetooth remote control is powered off and restarted.
4. Turn your phone’s Bluetooth back on to connect.
5. Turn on the Bluetooth of the mobile phone, the remote control is turned on, and when the mobile phone interface searches for “C666”, click to connect, and when the interface displays “Connecting/pairing”, press the remote control button continuously and quickly, and you can connect normally. (Only the first connection needs to be activated, and the future will be automatically connected and used normally.)

The solution to the problem that pressing the remote control to turn up the volume/ focus or not respond to the problem of Android phones individually

1. Turn on the camera to enter the photo interface.
2. Swipe left or find Camera Settings.
3. Tap the volume key function.
4. Set the volume button function to shutter (do not select zoom or focus)
5. The setting path of each phone camera is different, please find it by yourself.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>