ATOTO P5 Multi Functional On Dash Navigation User Manual
- July 20, 2024
- ATOTO
Table of Contents
P5 Multi Functional On Dash Navigation
“`html
Specifications:
- Operating Frequency: 5150 – 5250 MHz
- Usage: Indoor use only
Product Usage Instructions:
1. Installation:
Follow the installation guide provided in the user manual to set
up the device properly.
2. Power On:
Connect the device to a power source and turn it on using the
power button.
3. Frequency Band Selection:
Ensure that the device operates within the frequency range of
5150 – 5250 MHz for optimal performance.
4. Indoor Use:
Place the device indoors to comply with the operational
restrictions.
Frequently Asked Questions (FAQ):
Q: Can the device be used outdoors?
A: No, the device is restricted for indoor use only.
Q: What is the operating frequency range of the device?
A: The device operates in the frequency range of 5150 – 5250
MHz.
Q: How do I power on the device?
A: Connect the device to a power source and use the power button
to turn it on.
“`
<K{
$Ubr ,$*
8YUbL =hLOLRg
$Ubr cUYr
3kL]Y
@vXQaaQKaqn|
,$roYyYy!)c
%Vds”$$$=./7$&C>$8> ‘7$8$8=00FryOb}::6 J8$
GdVZs”= $A/$F2,&C
/7F J8FAryYo}roF:)8F0= 11186I
=8=8=0 8=.08=.08:F8=8=.0 DAD=>8F)>F>F >FF* 8DA ilM^Z”4=.0)8= 5=0=90
A}Yk =rYy Awwh
*b]LyYY 7b]`Yy ArRgY $ULwYy
wyrYRbro ;x[zNetpHtjN_[#
-+SNzPN[z
0YoYyLh ?N[W+zz[p+tp~mxftp#B(
;x[zNetpE[mx[zNz[?Np_[#uT +
6-y-Mrq]gf
CEE4Sfy6nnrSyy yCEE4Sfyfrdllgy y1fXb]nY
FY]nyRSs]PSyPgfqM]fnyb]PSfPSSuSdjqyqlMfnd]qqSlnlSPS]sSlnyqYMqyPgdjbvyt]qYy6ffgsMq]gfy
EP]SfPSyMfRy1Pgfgd]Py0SsSbgjdSfqy-MfMRM
nyb]PSfPSSuSdjqyCEEny=jSlMq]gfy]nynrO`SPqyqgyqYSy Wgbbgt]fXyqtgyPgfR]q]gfn
yFY]nyRSs]PSydMvyfgqyPMrnSy]fqSlWSlSfPS
yFY]nyRSs]PSydrnqyMPPSjqyMfvy]fqSlWSlSfPSy]fPbrR]fXy]fqSlWSlSfPSyqYMqydMvyPMrnSyrfRSn]lSRy
gjSlMq]gfygWyqYSyRSs]PS
+fvyPYMfXSnyglydgR]W]PMq]gfnyfgqySujlSnnbvyMjjlgsSRyOvyqYSyjMlqvylSnjgfn]ObSyWglyPgdjb]MfPSy
PgrbRysg]RyqYSyrnSl
nyMrqYgl]qvyqgygjSlMqSyqYSySkr]jdSfq
C2ySujgnrlSynqMqSdSfq
FYSySkr]jdSfqyPgdjb]Snyt]qYy6-yCMR]Mq]gfySujgnrlSyb]d]qynSqyWglqYyWglyrfPgfqlgbbSRySfs]lgfdSfqy
FY]nySkr]jdSfqynYgrbRyOSy]fnqMbbSRyMfRygjSlMqSRyt]qYyd]f]drdyR]nqMfPSyPdyOSqtSSfyqYSylMR]MqglyMfRy
vgrlyOgRv
y2lSfPY
-SqyMjjMlS]byPgfq]SfqyRSnyldSqqSrlnyyllPSjqSrlnySuSdjqlnyRSyb]PSfPSyPgfWgldSnyMruyCnnyCEEy R
6ffgsMq]gfyEP]SfPSnySqy0lsSbgjjSdSfqylPgfgd]krSy-
MfMRMy9SyWgfPq]gffSdSfqySnqyngrd]nyMruy RSruyPgfR]q]gfnynr]sMfqSn
y-SqyMjjMlS]byfSyRg]qyjMnyPMrnSlyR
]fqSlWllSfPSn
y-SqyMjjMlS]byRg]qyMPPSjqSlyqgrqSnybSny]fqSlWllSfPSnyvyPgdjl]nyPSbbSnynrnPSjq]ObSnyRSy
jlgsgkrSlyrfyWgfPq]gffSdSfqy]fRln]lMObSyRSyb
MjjMlS]b
FgrqyPYMfXSdSfqygrydgR]W]PMq]gfyfgfySujlSnnldSfqyMjjlgrslyjMlybMyjMlq]SylSnjgfnMObSyRSybMy
PgfWgld]qlyjgrllM]qyMffrbSlyb
Mrqgl]qlyRSyb
rq]b]nMqSrlyiyrq]b]nSlyb
lkr]jSdSfq 0lPbMlMq]gfyR
Sujgn]q]gfyC2 9
lkr]jSdSfqySnqyPgfWgldSyiybMyb]d]qSyR
Sujgn]q]gfyMruylMR]Mq]gfnyRSybMy6-ylqMOb]Syjgrlyrfy Sfs]lgffSdSfqyfgfyPgfqly
bly-
Sqylkr]jSdSfqyRg]qymqlSy]fnqMbblySqyrq]b]nlyMsSPyrfSyR]nqMfPSyd]f]dMbSyRSyy
PdySfqlSybSylMR]MqSrlySqysgqlSyPgljn
The device is rest rict ed f or indoor use only w hen it operat es in 5 15 0
-5 2 5 0 M Hz band
FCC Statement This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Note: This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
moRreoorfiethnet ofor lrleolwoicnagtemtehaesruerceesiv: ing antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is coCnnoencstueldt .the dealer or an experienced radio/TV technician
for help. Note: The Grantee is not responsible for any changes or
modifications not expressly approved by the party responsible for compliance.
such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. To
maintain compliance with FCC’s RF exposure guidelines, the distance must be at
least 20 cm between the radiator and your body, and fully supported by the
operating and installation configurations of the transmitter and its
antenna(s).