ATOTO F7S8P9X10 Android Car Radio 10 Inch Touch Screen Instruction Manual
- June 14, 2024
- ATOTO
Table of Contents
Diferont – Better – Reliabie
System Operation Manual
F7 WE
(Universal Fit or Vehicle Specific)
F7S8P9X10 Android Car Radio 10 Inch Touch Screen
Updated information (the latest instruction manual, system updates, new
functions, etc.) is available from https://myatoto.com
———–All rights including copyright reserved———–
F7 NEW
Manuals | Updates |
---|---|
https://resources.myatoto.com/product-manual/index | ![ATOTO F7S8P9X10 |
Android Car Radio 10 Inch Touch Screen - qr code 2](https://manuals.plus/wp- content/uploads/2023/11/ATOTO-F7S8P9X10-Android-Car-Radio-10-Inch-Touch- Screen-qr-code-2.jpg)https://resources.myatoto.com/upgrade- instructions/index
Before Use
- This manual is applicable to all ATOTO F7 models. Some functions mentioned in certain chapter of this manual is only available on selected ATOTO F7 models. New released F7 models may have extra functions that are not mentioned in this user manual.
- More information about panel operation, wiring connection and installation, as it relates to specific F7 models, please refer to specific documentation included in the package;
- The information in this manual may be insufficient. If you have any questions or problems concerning your unit that are not covered in this manual, consult your ATOTO dealer.
- INNO EVENT SHALL ATOTO BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE.
As an environmentally responsible company, we try to reduce paper consumption as much as we can. Scan the Manuals QR code on the cover to access our online manuals platform, where you can not only download all of our latest manuals in different languages, but also consult them more quickly by going to different sections with a finger tap. Scan the Updates QR code on the cover to update the system of your head unit.
Home Menu
A | Return to Home Menu |
---|---|
B | Exit the current display, or turn off the audio source |
C | Screen Brightness Adjust. There are 3 levels available. Double-tapping the |
brightness icon in the status bar can turn off the screen and display a black
screen. To turn on the screen, simply tap anywhere on it.
D| Phone signal & battery indicator (Bluetooth connection) When the phone
battery is lower than 30%, the phone signal may turn red.
E| Bluetooth Connection status indicator
F| System time
G| Date & Time
H| Media Widget. The current active audio source will be applied here
I| Main function options: Android Auto, Radio, Mobile Media Player, and
CarPlay.
J| Menu List: All system options are listed here;
On selected F7 models, the app list includes DVR-CAM app, which is preserved
for future USB DVR function.
Phone Link – Apple CarPlay, Android Auto, AutoLink
2.1. Apple CarPlay
2.1.1 Wired CarPlay Connection
NOTES
- Wired Apple CarPlay feature requires iPhone 5 or higher with the latest version of iOS.
- There is an
option on the F7’s System Menu and once the iPhone connects to ATOTO F7 viaa specific USB interface,it will enter into Apple CarPlay connection mode.
Connection steps:
Step 1: Connect your iPhone to the specific USB port labeled as <Phone
Link>, which goes from the rear USB1 interface of the F7.
Step 2: It will enter into Apple CarPlay mode automatically. Usually,
there will be a CarPlay icon displayed on your iPhone screen, too.
Step 3: On the first connection, you will see a pop-up window from your
phone screen, and you are required to click
2.1.2 Precautions
-
For the first connection: Make sure that your iPhone supports CarPlay feature and the CarPlay app isn’t restricted. If the CarPlay function isn’t restricted, you can see it display on your iPhone Settings (Path: Settings>General>CarPlay)
If the CarPlay function has been restricted on your iPhone, enable itinafew steps: Settings> Screen Time> Content & Privacy Restrictions, tap <Allowed Apps> and enable theapp;
Or through Settings> General> Restrictions, enter the password and enable the CarPlay app.
Which way is applicable will depend on the iOS version of the phone. -
It requires the user to use a factory or original USB cable that comes with the phone for CarPlay connection.
Non-manufacturer made USB cable may cause connection issues such as black screen, or unstable connection.
2.1.3 Wireless CarPlay Connection
NOTES
- If your phone can not connect to F7 successfully, please remove “F7” from the Bluetooth list on your phone. Then, proceed to reconnect by following the steps below.
- Wireless CarPlay is available on iPhone 5 and later models with iOS 9.0 and higher.
- If your phone does not support wireless CarPlay, please use wired connection instead.
Connection steps:
Step 1: Enable Bluetooth Wi-Fi on your iPhone;
Note: Ensure your iPhone and F7 do not connect to any other Wi-Fi
hotspots or Bluetooth, and make sure your car is in park(P);
Step 2: Enable Bluetooth from your iPhone and choose F7’’s Bluetooth name
to pair.
Step 3: Allow all the consecutive prompts on your phone to complete setup
(Figure 04, Figure 05, Figure 06)
Step 4: The connection is complete now. The F7 will enter wireless
CarPlay mode automatically (see Figure 07) when the switch in Figure 08 is
enabled.
2.2.Android Auto
2.2.1 Wired Android Auto Connection
NOTES
-
Wired Android Auto is compatible with Android phones running
Android 6.0 or higher. Android Auto may not be available on all devices. -
You need to install
app on your Android phone before using it on F7. -
There is also an Android Auto option on the F7, and when the compatible Android smartphone connects to it, Android Auto is running on the F7 screen.
Connection steps:
Step 1: Connect your Android phone to the specific USB port labeled as
2.2.2 Precautions
-
The Android Auto app should be installed on your phone, and all the permissions to the “Android Auto app” on your phone should be enabled (Settings>Apps>Android Auto>Permissions).
The APP versions of the, , , should be the latest one, otherwise, it may cause some unknown issues. -
It requires the user to use a factory or original USB cable that comes with the phone for the Android Auto connection.
Non-manufacturer made USB cable may cause connection issues such as black screen, or unstable connection. -
If you see the prompt on your phone about <Android Auto stopped responding. To continue, unplug your phone from the USB cable and plug it back in again>, thenit means not all the settings are finished in the first time connection. You just need to clear the data and cache of the Android Auto app on your phone, then reconnect your phone, and follow the instructions on the phone to finish the permission settings again.
2.2.3. Wireless Android Auto Connection
NOTES
-
Before use, make sure that you can use wired Android Auto on your F7 with your phone.
-
Before use, make sure that your phone supports wireless Android Auto. Wireless Android Auto is compatible with these Android versions:
● Any phone with Android 11.0 or higher;
● A Google or Samsung phone with Android 10.0;
● ASamsung Galaxy S8, Galaxy S8+, or Note 8, with Android 9.0.
If your phone does not support wireless Android Auto, please use wired connection instead. -
If you are using wireless Android Auto on your phone for the first time,make sure that the wireless Android Auto option or wireless projection option is on.
-
If your phone can not connect to F7 successfully, please clear Bluetooth pairing records at F7(Path on selected F7 models: Settings > Bluetooth Settings > Clear Records) and delete “F7″ from your phone Bluetooth list,then try to connect as above steps again;
Connection steps:
Step 1: Enable Bluetooth Wi-Fi on your phone;
Note: Ensure your phone and F7 do not connect to any other Wi-Fi hotspots
or Bluetooth, and make sure your car is in park(P);
Step 2: Enable Bluetooth from your phone and choose F7’s Bluetooth name
to pair.
Step 3: Allow all the consecutive prompts on your phone to complete setup
(Figure 11, Figure 12, Figure 13)
Step 4: The connection is complete now. The F7 will enter wireless
Android Auto mode automatically (see Figure 14) when the switch in Figure 08
is enabled.
Notes for both CarPlay and Android Auto:
-
F7 regards the audio of CarPlay & Android Auto (CPAA) and local media apps (BT Music / Radio / Music / AUX) as mutually inclusive. In other words, they can output sound at the same time.
You can use maps in CPAA while listening to the radio or playing music from a USB flash drive. To set navigation and media mix volume, please refer to chapter 8.3.4. Dual Audio Control.
In general, the navigation app and media app in CP and AA can run simultaneously. -
F7 may achieve regular audio mixing when CarPlay/Android Auto (CPAA) is providing background navigation, while local music (USB/ SD card music), AUX audio, or the radio interface is active in the foreground. But, when CPAA is active in the foreground and local music is playing in the background, audio mixing cannot be performed.
-
You can disconnect wireless CarPlay/Android Auto from the phone, but you cannot disconnect it from the head unit.
-
It’s crucial to maintain an adequate battery level on your mobile device. If the device is overheating, disconnect it from CarPlay to allow it to cool down. Because a low phone battery may prevent a successful CarPlay connection and an overheating phone can potentially lead to glitches in the navigation display.
-
The F7 features various audio sources. Upon restarting the system, F7 will display the audio sources that was in use last time before shutdown.
-
During a wireless Android Auto connection, if Wi-Fi is disabled, the connection may be interrupted. To re-establish wireless Android Auto, you’ll need to reactivate Wi-Fi, reconnect to Bluetooth, or tap on the Android Auto app once more.
2.3. AutoLink 2.3.1. How it works on the F7
Notes: Please ensure that both wired and wireless CarPlay/Android Auto
have been disconnected before attempting a screen mirroring connection.
Operation steps:
For Android phone:
- Open the AutoLink application on the F7, and scan the QR code (See Figure 15-1)to download the “Mirroring” application. Install the “Mirroring” app to your Android phone.
- Connect your phone to the
port of F7 using the original phone USB cable; - At this point, you may see a pop-up window (See Figure 15-2) as shown in the figure below. Click on “Start Now” for phone mirroring.
For iPhone:
No extra App required for connection, and the operation steps are as
follows:
- Tap
icon to run AutoLink option on F7. - Connect your iPhone to the
port of F7 using the original phone USB cable; - At the same time, you will see a pop-up window (See Figure 16) from your phone screen, and you are required to click
.
And then you may also see a pop-up window (See Figure 17) on your iPhone to ask you to enter a device password. In this case, please enter the iPhone screen lock pass code).
2.3.2 Precautions
-
The AutoLink feature requires the phone to support CarPlay or Android Auto feature first. Phones that do not support these two functions cannot use the AutoLink.
-
It requires the user to use a factory or original USB Cable that comes with the phone for AutoLink connection. Non-manufacturer made USB cable may cause connection issues such as connection failure, or unstable connection.
-
Check and make sure phone Bluetooth is connected to F7. If not, there is no audio out from the F7 side when you play multimedia on your phone.
-
AutoLink captures the display content of the mobile phone and displays it on the F7’s screen simultaneously. If your phone comes with a curved screen display (Figure 18), the display mirrored on F7 will not be full-screen (Figure 19);
-
If you have a problem installing Mirroring to your Android phone, contact ATOTO customer support for requesting download link. If the QR code on the head unit has expired, you also have the option to visit https://resources.myatoto.com/ and search for “Mirror-B-Mirroring” and download the “Mirroring” app to your Android phone (see Figure 19-01, 1-02).
Note: The “Mirroring” app is only compatible with Android phones and cannot be used on the head unit itself. -
Phone manufacturers may release new system firmware, and itmay cause the Mirroring app to not work properly with new phone firmware. If you have a connecting issue after the phone s updated, please contact the ATOTO customer support team for asolution;
Radio
3.1.How each option works
A | Touch to shift between FM and AM station list (FM1, FM2, FM3, AM1, Am2); |
---|---|
B | Long press to auto scan and store stations; |
C | PS (Prescan Search) . Touch Prescan search, each scanned |
station will be played for 3s, touch again to stop;
D| Dx/Local Switch. LOC is an abbreviation of local. Enabling this option
means especially for local frequency handling;
E| Touch or to search qualified stations forward or backward;
F| Touch or to jump forward or backward to the nearest frequency;
G| This place displays the current EQ mode the system is applying
H| Preset station list. There are 18 preset FM radio stations and 12 preset AM
radio stations. All are initially filled with the first frequency number. When
you click
I|
It is an option that allows the F7 to re-tune to a different Frequency that
provides the same station when the first signal becomes too weak (e.g. when
moving out of range).
J|
It refers to the broadcasting of a specific type of traffic report on the
Radio Data System.
K|
It allows you to search for radio stations by the type of programming they
offer, such as news, sports, music genres, talk shows, etc. When you select a
specific program type, your radio will search for stations broadcasting that
type of content.
L| When ST is displayed, it means this is a stereo station.
3.2. Radio Settings. The available
regions for selection are Europe, Latin America, North America, Japan, Russia,
Australia, China.
Different areas may have different radio frequency range and scan step. Select
the correct region based on your location, since a wrong radio area chosen may
result in less radio station reception.
Please choose the correct one following the below table:
Area| FM range
(MHz)| AM range
(kHz)| FM step
(MHz)| AM step
(kHz)
---|---|---|---|---
North America| 87.5∼107.9| 530∼1710| 0.2| 10
Latin America| 87.5∼108| 530∼1710| 0.1| 10
Europe| 87.5∼108| 522∼1620| 0.05| 9
Russia| 65∼108| 522∼1620| 0.03| 9
Japan| 76∼99| 522∼1629| 0.1| 9
Austrailia| 87.5∼108| 522∼1710| 0.1| 9
China| 87.5∼108| 531∼1629| 0.1| 9
NOTES: When you restore this device to factory settings, the will also
return to the default option. If your area is different from the default area
option, remember to select it manually, otherwise, it may not work properly.
3.3. Precautions
- If the radio interface shows “TP seeking” and then skip to another station while you are listening to favorite one, it means you turned on TP Option. TP (Traffic Programme) is used to allow the user to find only those stations that regularly broadcast traffic bulletins. If you don’t need this function, please turn off the TA option.
- F7 comes with the RDS (Radio Data System) function on the condition that the radio station of the area transmits the RDS signal. In areas without the RDS signal, the FM/AM will be available automatically.
| Europe| Latin America| North America| Japan| Russia| Australia
---|---|---|---|---|---|---
RDS| √| ×| ×| ×| √| √
RBDS| ×| √| √| ×| ×| ×
AF| √| ×| ×| ×| √| ×
TA| √| ×| ×| ×| √| ×
The current car head unit being shipped to North America does not support RBDS
functionality even though the RBDS signal is available in North America.
However, there is a possibility that this feature will be included in future
product upgrades. For more information, please refer to the product
description for details. (3). The
Bluetooth
4.1 Bluetooth Settings
① The Bluetooth name of the head unit is listed here.
Tap icon ① to disconnect the phone Bluetooth from the head unit, and tap ② to
reconnect again.
< Auto Answer> When it is enabled, the incoming call will be
automatically answered in 3 seconds if there is no operation from the user.
< Launch CP or AA after BT connection.> When it is enabled, CarPlay or
Android Auto will be automatically launched after the Bluetooth and Wi-Fi are
successfully connected.
Note: After the Bluetooth disconnection, the Bluetooth pairing records will
not be displayed on the head unit.
4.2 Bluetooth Connection
Bluetooth is activated by default. To connect, simply turn on your phone’s
Bluetooth and select F7’s Bluetooth from the list. Once it is connected
successfully, the Bluetooth icon on the upper left corner on the F7 screen
will also light up;
4.3 Bluetooth Hands-free
|
---|---
| Dialpad for making a call manually;
---|---
| Click to start a call
| Delete the last number
| Phone Contacts;
| Click to refresh phone contacts
| The Call Log of the phone will be displayed here;
| Click it to enter into Bluetooth Audio Streaming option;
| Bluetooth Audio Remote Control button (AVRCP)
| At call log page, select the desired number from the call history, then tap
icon to start a phone call.
4.4. Precautions
When a phone connects to F7 via Bluetooth option for the first time, F7
will send a request for sync phone contacts once you click this icon. You need
to select
Mobile Media Playback (USB / MicroSD)
5.1 Device requirements
MicroSD storage: up to 512GB; USB flash drive: up to 2TB
Compatible file system: FAT32, NTFS, exFAT.
5.2 How each button/icon app works
| Short press it to skip to the previous track.
---|---
| Pause/Play button.
| Short press it to skip to the next track.
| Press it to select between Repeat All, Repeat One, or Repeat Directory
| Press it to select between
| Press it to view available files from an external storage device (USB/micro
SD)
| Files or folders filtered by Audio Format
| Files or folders filtered by Video Format
| Files or folders filtered by Image Format
NOTES
- Audio Playback in this option has memory function and can play from where it is left last time. To add all the latest music files in the external storage into the playlist, it will automatically scan the device every time after plug-in.
- If your media files are organized in folders, and you need to browse and play files in other folders, you may need to click the to browse all folders available in the device, and then scroll and select the one you want;
- When using USB or MicroSD to update the system firmware, please format it as
, or before proceeding, otherwise, the update process may fail;