better bathrooms AR2TWMBM 2 Tone Wall Mounted Basin Mixer User Manual

better bathrooms AR2TWMBM 2 Tone Wall Mounted Basin Mixer

Product code

• AR2TWMBM
• AR2TWMBATHM

1. Single-person assembly
2. We always recommend using professional tradespeople to install your product

Congratulations on your purchase
Welcome to our growing gang of save shoppers

• We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings, and furniture to match. So, you can fall in love with your space every single day.
• As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards, and being placed on The Sunday Times Fast Track 100.
• We hope your new product exceeds your highest expectations. However, if you experience any problems, please:
  • log in to your account and contact our customer services team via your self-serve portal betterbathrooms.com/CustomerAccount/Login.
  • contact us via betterbathrooms.com/content/contact-us.

Important information

• Please read these instructions thoroughly and retain them for future reference
• All installation work must be carried out to comply by a qualified installer.
• Always check pressure compatibility, and check the website for min/maximum pressure of the product.
• Pressures to hot and cold supplies should be balanced for optimum performance
• All installation work must be carried out to comply with the Water Bylaw Regulations.
• Isolation valves should be fitted to both supply pipes as part of the installation
• The system must be flushed through before installation.
• The area should be checked for pipes and wires before drilling.

Parts/Diagrams

Tools required

• Spanner
• Allen key

Installation

• Step 1:
  Determine the fixing position for the faucet body. Make a groove in the wall according to the faucet body. The dimension of the groove should be 200mm x55mm.

• Step 2:
  Drill the holes on the wall and connect the cold water inlet and hot water inlet to the proper positions.

• Step 3:
  Install the tap body to the right position and make sure the Hot&Cold water inlets correct

• Step 4:
  Mount the mixer body. Drill the tile as per the dimension on the right and\ fit it on the wall.

• Step 5:
  Screw off the handle lever, and assemble the handle and spout using the Allen key. Then fix the handle lever.

• Step 5:
  Installation completed.

OPERATION

Lift up the handle to open, turn left to hot water, turn right to cold water, and mix cold and hot water in the middle.

Maintenance

Cartridge removal

• IMPORTANT: Ensure to turn off the water supply to the mixer before any maintenance
• Please note: Design may vary from those shown below

1. Remove the screw cap cover.
2. Loosen grub screw using an allen key,
3. Pull the handle from the mixer.
4. Unscrew the cartridge shroud.
5. Using a spanner remove the cartridge nut.
6. Pull the cartridge from the mixer.
7. Carry out maintenance.
8. Replace the cartridge ensuring pins on the underside of the cartridge with holes inside the mixer.
9. Replace all components (do not overtighten cartridge nut)

CLEANING

To maintain the surface of your product, wipe with a clean damp cloth and wipe dry. Do not use abrasive cleaning agents or materials that can strip and scratch thesurface: the use of these agents or materials can invalidate your guarantee. It is recommended to wipe and dry regularly.

For more information

• Visit betterbathrooms.com
• E-mail customerservices@buyitdirect.co.uk
• Call 03303903062
• Write to Trident Business Park, Neptune Way, Huddersfield, HD2 1UA.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>