LEDYi Lighting PR RGB2 3x10A 3v1 RGB/CCT/Dimming 3 Channel LED RF Controller Owner’s Manual

LEDYi Lighting PR RGB2 3x10A 3v1 RGB/CCT/Dimming 3 Channel LED RF

Controller

Model No: PR RGB2 3x10A 3v1

3 Channels/10A per channel/Step-less dimming/Wireless remote control/Auto- transmitting/Synchronize

Features

• Match with RF 2.4G single zone or multiple zone single color, dual color, and RGB/RGBW remote control.
• One RF controller accepts up to 10 remote control.
• 4096 levels 0-100% dimming smoothly without any flash.
• When using RGB light, built-in 10 dynamic modes, include jump or gradual change style.
• Auto-transmitting function: The Controller automatically transmits a signal to another controller with a 15m control distance.
• Synchronize on multiple controllers.

Technical Parameters

Input and Output

Input voltage| 12-36VDC
Input current| 30.5A
Output voltage| 3 x (12-36)VDC
Output current| 3CH,10A/CH
Output power| 360-1080W(12-36V)
Output type| Constant voltage
Environment

Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c: +85OC
IP rating| IP20
Warranty and Protection

Warranty| 2 years
Protection| Reverse Polarity

Dimming data

Input signal

Control distance

| RF 2.4GHz

15m(Barrier-free space)

---|---
Dimming gray scale| 4096 (2^12) levels
Dimming range| 0 -100%
Dimming curve| Logarithmic
PWM Frequency| 750Hz (default)
Safety and EMC

EMC standard (EMC)| EN301 489, EN 62479
Safety standard(LVD)| EN60950
Radio Equipment(RED)| EN300 328
Certification| CE,EMC, LVD,RED
Weight

Net weight| 0.240kg
Gross weight| 0.259kg

Mechanical Structures and Installations

Wiring Diagram

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press the match key, and immediately press the on/off key (single zone remote) or zone key (multiple zone remote) of the remote. The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold the match key for 5s to delete all matches, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power again, and immediately short press the on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power again, and immediately short press the on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

RGB Dynamic mode list

Dual color control

• CH1=Warm white LED
• CH2=Cool white LED

Each channel can supply up to 240W(@24V) and the white balance can be controlled as such:

Malfunctions analysis & troubleshooting

No light

| 1.  No power.

2.  Wrong connection or insecure.

| 1.  Check the power.

2.  Check the connection.

Wrong color| 1. Wrong connection of R/G/B wires.| 1. Reconnect R/G/B wires.
Uneven intensity between front and rear,with voltage drop| 1. Output cable is too long.

2. Wire diameter is too small.

3. Overload beyond power supply capability.

4. Overload beyond controller capability.

| 1. Reduce cable or loop supply.

2. Change wider wire.

3. Replace higher power supply.

4. Add power repeater.

No response from the remote| 1.  The battery has no power.

2.  Beyond controllable distance.

3.  The controller did not match the remote.

| 1.  Replace battery.

2.  Reduce remote distance.

3.  Re-match the remote.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>