Emaux SSCnano Salt Chlorinator Instruction Manual

Emaux SSCnano Salt Chlorinator

Specifications

• Model: SSCnano
• Input Voltage/Frequency: 110-240V / 50-60 Hz
• Salt Level: 3500 ppm
• Cell Production Rate: 4g/hr, 6g/hr, 8g/hr, 10g/hr
• Maximum Working Pressure: 2.5 bar
• Cell Connections: 1.5/50mm and 32mm&38mm union
• Working Temperature: 70 to 214°C
• Min. Flow: 249 L/h
• Max Pool Volume: 134 m³

Product Usage Instructions

• Installation
  • The SSCnano has an arrow mark on its body showing the direction of the water flow.
  • It operates with water flow rates between 3-10 m/h. Use a bypass loop with a flow control valve if the flow rate is over 8 m/h.
  • Add a valve before and after SSCnano for isolation and maintenance facilitation.
• Operation
  • On/Off
  • Press once: Turn the SSCnano on.
  • Press twice: Turn the SSCnano off.
  • Chlorine Percentage
  • Press once: Set chlorine percentage to 25% (light flashes three times).
  • Press twice: Set chlorine percentage to 50% (light flashes twice).
  • Press three times: Set chlorine percentage to 75% (light flashes once).
  • Press four times: Set chlorine percentage to 100% (light turns off).

FAQs

• What salinity range is suitable for the SSCnano?
  • The recommended salinity range is between 3,000 to 4,000 ppm.
• How do I optimize the chlorine percentage for my pool?
  • You can adjust the chlorine percentage by following the instructions provided in the operation manual. Press the button multiple times to set the desired rate.

WARNINGS

• This product should be installed and repaired by a technician who is qualified in the installation and maintenance of pool/spa products.
• Please read this manual before installing the product. The instructions in this manual can be followed exactly. Disconnect electrical power before removing the cover for the servicing unit.
• Replace all screws and covers before reconnecting the unit to electric power. Incorrect installation and/or operation can cause serious injury, property damage, or death.
• To reduce the risk of injury, do not permit children to use this product. Improper installation and/or operation will void the warranty.

PRODUCT INTRODUCTION

• SSCnano is an innovative inline salt chlorinator that seamlessly synchronizes with the pump. With its preset timer offering flexible options and 4 chlorine production modes, SSCnano provides complete control over the chlorination process.
• Enjoy the benefits of long cell life and reduced chemical usage, thanks to its efficient and environmentally friendly design. Compact and user-friendly, SSCnano revolutionizes the experience of chlorine production.
• Salt chlorination is a method of sanitizing swimming pools with chlorine generated by electrolysis.
• The electrolysis is achieved by passing the salt water solution through a weak electric charge in an electrolytic cell, which converts sodium chloride (salt) in the water into chlorine gas. The gas is dissolved in the water and becomes sodium hypochlorite (liquid chlorine).

SPECIFICATIONS

Code| Model| Input Voltage/ Frequency| Salt Level| Cell Production Rate| Maximum Working Pressure| Cell Connections| Working Temperature| Min. Flow| Max Pool Volume
---|---|---|---|---|---|---|---|---|---
9130045| SSCnano4| 110 – 240V

/50-60 Hz

| 3500

ppm

| 4g/hr| 2.5 bar| 1.5”/ 50mm and 32mm&38mm union| 10-45°C| 3 m³/hr| 20m³
9130046| SSCnano6| 6g/hr| 30m³
9130047| SSCnano8| 8g/hr| 40m³
9130048| SSCnano10| 10g/hr| 50m³

DIMENSION (mm)

ACCESSORIES

• 32mm(1¼”) & 38mm(1½”) Flexi hose connector and 50mm (1½”) union installation, please refer to Part 3, Installation & Operation.
• The mounting stand is allowed the SSCnano place stand on the floor or wall mount.

INSTALLATION & OPERATION

Check the pool system regularly and make sure the parameters are within the range:

INSTALLATION

• The SSCnano has an arrow mark on its body [Fig.2] showing the water flow direction. It is designed to operate with water flow rates between 3-10 mᶾ/h.
• Please refer to the pipe manufacturer’s specifications for the recommended maximum flow rate. It is a must to use a bypass loop with a flow control valve if the flow rate is over 8 mᶾ/h. [Fig.3] showing the general installation.
• Adding a valve before and after SSCnano to make sure the isolation between SSCnano and the facilitate when maintenance.

CONNECT WITH 50MM (1½”) UNION

SSCnano can be installed either horizontally or vertically. The union is designed for imperial 1½” pipe and metric 50mm pipe. Pipes require gluing to fix.

CONNECT WITH THE 32MM(1¼”) & 38MM(1½”) FLEXI HOSE CONNECTOR

• The 32mm(1¼”) & 38mm(1½”) Flexi hose connector can let the SSCnano use flexible pipes, shown as in [Fig.6].

OPERATION

ON / OFF

CHLORINE PERCENTAGE

• Optimize the chlorine percentage, to suit pool size/ temperature.
• If the pool size is smaller than the max pool size of the SSCnano, lower the chlorine percentage proportionally. (e.g. Using SSCnano4 for a 10m³ pool, press twice to 50% of the max chlorine percentage rate.)

Operating during winter:

• The lower the water’s temperature, the lower the salt water’s conductivity will be. This in turn will cause the SSCnano to work much harder than normal to produce chlorine. Algae and bacteria don’t grow well in cold environments.
• Thus, very little chlorine is needed, simply adjust the chlorine percentage to an ideal rate.
• During winter (e.g. temperature drops below 16℃ ), you can reduce to 25 % of the max chlorine percentage to minimize chlorination for your pool.

Low-temperature protection:

• When the water temperature is below 10℃, SSCnano will stop functioning. ( , NaCl light will flash, refer to Part 4, Troubleshooting). This feature prolongs the service life of the cell.

TIMER

• The timer setting can synchronize with the expected operation time for energy saving. (e.g. To set the timer ON at 9:00 and off at 17:00. When it is 9:00 a.m., press twice to set the timer of SSCnano to 8 hours. It will stop running at 5:00 p.m. and function again at 9:00 a.m. the next morning.)

Note:

1. All settings will be saved when pressing ON/OFF to power off the SSCnano.
2. Power cut SSCnano will reset all settings to factory default.

MEMORY MODE

• This function is for connecting the SSCnano to an automation system device. The SSCnano will start chlorine generation once powered up. The chlorine percentage setting will be saved after power down. (e.g. The chlorine percentage of the SSCnano was set to 50%. The setting will be kept if the power is cut and turned back on.)
• Note: The set time will not be saved and reset to default when powered down.

To enter memory mode:

• During the OFF stage, press and hold for 5 seconds to enter the memory mode. (The light will flash three times. It will flash once every 30 seconds if the SSCnano is running in memory mode.)

To cancel memory mode:

• During the ON stage, press and hold for 5 seconds to cancel the memory mode. (The light will flash three times after canceling the mode and then stop.)

TROUBLESHOOTING

SPARE PARTS LIST

TERMS OF THE WARRANTY

As the original purchaser of this equipment has purchased from Emaux Water Technology Co Ltd, through an Authorized International Distributor or Dealer, warrants its products are free from defects in materials and workmanship under normal use during warranty period. The warranty period begins on the day of purchase and extends only to the original purchaser. It is not transferable to anyone who subsequently purchases the product from you. It excludes all expendable parts. During the warranty period, Emaux authorized reseller will repair or replace defective parts with new parts or, at the option of Emaux, serviceable used parts that are equivalent or superior to new parts in performance. This Limited Warranty extends only to products purchased from Emaux-authorized resellers. This Limited Warranty does not extend to any product that has been damaged or rendered defective

• (a) as a result of accident, misuse, or abuse;
• (b) as a result of an act of God;
• (c) by operation outside the usage parameters stated herein;
• (d) by the use of parts not manufactured or sold by Emaux;
• (e) by modification of the product;
• (f) as a result of war or terrorist attack; or
• (g) as a result of service by anyone other than Emaux’s authorized reseller or authorized agent.

EXCEPT AS EXPRESSLY OUTLINED IN THIS WARRANTY, EMAUX MAKES NO OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. EMAUX EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS EXPRESS LIMITED WARRANTY.

CONTACT

• EMAUX WATER TECHNOLOGY CO., LTD
• ADDRESS FLAT A-D, 20/F., KAI BO 22, 22 WING KIN ROAD, KWAI CHUNG, HONG KONG
• PHONE +852 2832 9880
• YOUR PREMIER SUPPLIERwww.emauxgroup.com.
• Model: SSCnano

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>