AVTEQ Neat Frame Floor Stand Installation Guide
- July 20, 2024
- AVTEQ
Table of Contents
AVTEQ Neat Frame Floor Stand
Product Information
Specifications
- Product Name: Neat Frame Floor Stand
- Model: NEATFRAME-STAND
Package Contents
- A. Base plate [x1]
- B. Body column [x1]
- C. Rear cover [x1]
- D. Flat 1/4-20 1/2 screw [x1]
- E. Socket M6x1.0 10mm long screw [x2]
- F. Flat 3/8-16 1.25 screw [x3]
Product Usage Instructions
Step 1: Secure Base to Body Column
Place the base plate at the bottom of the body column and secure them
together.
Step 2: Secure the Neat Frame
Attach the Neat Frame to the inner hole of the body column by screwing from
the bottom into the top inner hole.
Step 3: Secure Rear Cover to the Body Column
Secure the rear cover to the body column using screws through the two top
holes of the rear cover.
FAQ
- Q: How do I contact support for this product?
A: You can contact us at support@avteqinc.com for any questions or assistance.
PACKAGE CONTENTS
- A. Base plate [x1]
- B. Body column [x1]
- C. Rear cover [x1]
- D. Flat 1/4-20 1/2” screw [x1]
- E. Socket M6x1.0 10mm long screw [x2]
- F. Flat 3/8-16 1.25” screw [x3]
INSTALLATION INSTRUCTION
Secure base to body column
- Place body column (B) on top of the base plate (A) and screw it on from the bottom of the base plate with [x3] flat-headed 3/8-16 1.25” screws (F).
Secure the Neat Frame
- Place the Neat Frame on top of the body column (B).
- Secure the Neat Frame with a [x1] flat 1/4-20 1/2” screw (D). Screw from the bottom into the top inner hole of the body column.
Secure rear cover to the body column
- Place the rear cover (C) behind the body column (B).
- Secure the rear cover using a wrench and [x2] socket M6x1.0 10mm screws (E) and screw into the two top holes of the rear cover.
Have a question?
Contact us at support@avteqinc.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>