AVTEQ NEAT-BRK Neat Bar Mount Installation Guide

AVTEQ NEAT-BRK Neat Bar Mount

Product Information

Specifications:

• Product Name: Neat Bar Mount (NEAT-BRK)
• Package Contents:
  • [x1] Neat Bar Bracket (NEAT-BRK)
  • [x1] Camera Spine (FS-24, FS-32, or FS-42)
  • [x1] 1/4-20 Screw
  • [x4] M4x0.7 Screw

Product Usage Instructions

1. Step 1: Attach camera spine
   Insert the camera spine into the locking tab.

2. Step 2: Install Neat Bar wall mount to bracket (NEAT-BRK)
   Above Display: Attach the Neat provided wall mount to the bottom front of Avteq’s Neat Bar Bracket. Align the holes and secure with the provided M4 screws.

3. Step 3: Attach Neat Bar camera to Neat Bar wall mount
   Mount the Neat Bar camera onto the Neat Bar wall mount securely.

4. Step 4: Secure bracket (NEAT-BRK)
   Insert the 1/4-20 screw into the designated hole based on the height of the display for securing the bracket.

*TIP:
If you have any questions, contact support at support@avteqinc.com .

FAQ

Q: What should I do if I encounter issues during installation?
A: If you face any difficulties during installation, please refer to the user manual or contact our support team at support@avteqinc.com for assistance.

Install Guide
Neat Bar Mount (NEAT-BRK)

PACKAGE CONTENTS

Neat Bar Mount installation requires an Avteq display mount (UM-1 or UM-2 included with Avteq carts, stands, and credenzas) and the Neat Bar Wall Mount/Mount Adapter (included with Neat Bar camera). Please refer to the Neat Bar Camera’s user manual for more information.

Included with Neat Bar Mount (NEAT-BRK):

• A. [x1] Neat Bar Bracket (NEAT-BRK)
• B. [x1] Camera Spine (FS-24, FS-32, or FS-42)
• C. [x1] 1/4-20 Screw
• D. [x4] M4x0.7 Screw

Installation

• STEP 1 Attach camera spine

  • Remove the screws of the locking tab on the camera spine (B) and center the camera spine vertically on the Avteq display mount.
  • Fix position of camera spine using the top hooks on both sides. After positioning, screw in the locking tab. It should be adjusted so that the bottom of the camera spine cannot separate from the bottom of the display mount.

• STEP 2 Install Neat Bar wall mount to bracket (NEAT-BRK)
  Refer to Neat Bar Camera’s user manual for instructions on how to assemble the wall mount included with the Neat Bar camera.

  • To Position Camera Above Display: Attach Neat provided wall mount to the top front of Avteq’s Neat Bar Bracket (A). Slide Avteq’s bracket mount so that the top 4 thread holes line up with the 4 beveled holes in the Neat wall mount. Use M4 screws (D) [x4] provided to secure the Neat wall mount to the Neat Bar Bracket.
  • To Position Camera Below Display: Attach Neat provided wall mount to the bottom front of Avteq’s Neat Bar Bracket (A). Slide Avteq’s bracket mount so that the bottom 4 thread holes line up with the 4 beveled holes in the Neat wall mount. Use M4 screws (D) [x4] provided to secure the Neat wall mount to the Neat Bar Bracket.

• STEP 3 Attach Neat Bar camera to Neat Bar wall mount
  Slide Neat Bar camera to the wall mount for it to hook and attach to the base of the camera.

• STEP 4 Secure bracket (NEAT-BRK)

  • Hang the Neat Bar Bracket on the camera spine at the desired height with its hooks to mount the camera either above or below the display.
  • Lock in position using a 1/4-20 screw (C) [x1]. Insert in open hole from behind the mount.

TIP: When hanging the mount bracket (NEAT-BRK), consider the height of the display to ensure the mount bracket is peaking out either above or below the display.

Have a question?
Contact us at support@avteqinc.com
avteqinc.com

References

• AVTEQ | Collaborative AV Furniture Designed for Today's Technology

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>