AVTEQ CAMERA-STAND-VB Camera Floor Stand Installation Guide
- June 1, 2024
- AVTEQ
Table of Contents
AVTEQ CAMERA-STAND-VB Camera Floor Stand
Specifications:
- Supports leading PTZ cameras and select video bars
- Includes attachments for video bar, PTZ, and Cisco cameras
- Adjustable height
- Various screw sizes included based on attachment type
Product Usage Instructions
Step 1: Secure base to outer sleeve
Place the base plate on the bottom of the outer sleeve and secure it using the provided screws.
Step 2: Adjust the height of the Camera Floor Stand
Adjust the height by tightening or loosening the screws on each side of the outer sleeve to your desired level.
Step 3: Secure the camera shelf attachment
Attach the camera shelf to the stand by screwing it into the holes located on each side of the camera attachment. Make sure it is securely in place.
Step 4: Secure camera to PTZ attachment
If you have a PTZ camera attachment, secure your camera to it by using the provided screws from the bottom of the attachment.
Step 5: Secure camera to video bar or Cisco attachment
If you have a video bar or Cisco camera attachment, follow the specific instructions for each type to secure your camera accordingly. Make sure to use the correct quantity of screws basedon the attachment type.
FAQ
- Q: How do I know which attachment is included in my order?
- A: The specific camera attachment included in your order is based on your selection during purchase. Refer to the list of package contents to identify which attachment you have received.
- Q: Can I adjust the height of the Camera Floor Stand?
- A: Yes, you can adjust the height of the stand by tightening or loosening the screws on each side of the outer sleeve to achieve your desired height.
- Q: How many screws are included for each type of camera attachment?
- A: The quantity of screws provided varies based on the specific camera attachment type. Refer to the user manual for details on the number of screws included for video bar, PTZ, and Cisco attachments.
PACKAGE CONTENTS
The Camera Floor Stand supports the leading PTZ cameras and select video bars. One camera shelf attachment is provided based on your order and the specific camera you wish to support.
Included with Camera Floor Stand
- A. Base plate [x1]
- B. Outer sleeve [x1]
- C. Inner sleeve [x1]
- D. Camera attachment [x1]
- Only one camera attachment is included based on your order
- E. Flat headed 5/16-18 1/2” screw [x2]
- F. 10-24 3/8” screw [x4]
- G. 1/4-20 1/2” screw (For the sleeves) [x4]
- H. 1/4-20 1/4” screw (Only for PTZ camera attachment) [x1]
- I. m4x0.7 screw (Only for video bar and Cisco camera attachment)
- Screw quantity varies based on the specific camera attachment
- Video bar attachment = [x4
- Cisco attachment = [x2]
Installation Instruction
STEP 1
Secure the base to the outer sleeve
- Place outer sleeve (B) on top of the base plate (A) and screw it on from the bottom of the base plate with [x2] flat-headed 5/16-18 1/2” screws (E).
STEP 2
Adjust the height of the Camera Floor Stand
- Slide the inner sleeve (C) into the outer sleeve (B).
- Adjust and raise the inner sleeve to the desired height and align the inner and outer sleeve holes.
- Screw [x4] 1/4-20 1/2” screws (G) in to the top 4 holes of the outer sleeve, with 2 holes located on each side of the outer sleeve.
STEP 3
Secure the camera shelf attachment
- Place the camera attachment (D) on top of the inner sleeve.
- Screw both sides of the camera attachment onto the inner sleeve using [x4] 10-24 3/8” screws (F). Screw into the two holes located on each side of the camera attachment
- Refer to step 4 if you have a PTZ camera attachment. For a video bar or Cisco camera attachment, please refer to step 5.
STEP 4
Secure camera-to-camera attachment (PTZ)
- Place the camera on the camera attachment and align the camera attachment holes with the camera’s screw pattern.
- For PTZ camera attachment: Following the camera’s screw pattern and using a [x1] 1/4-20 1/4” screw (H), screw from the bottom of the camera attachment to secure the camera.
STEP 5
Secure camera to camera attachment (VB/CISCO)
- Place the camera on the camera attachment and align the camera attachment holes with the camera’s screw pattern.
- For Cisco attachment: Attach the Cisco provided wall mount to the Cisco camera using the provided M4 screws. Following the camera’s screw pattern and using [x2] m4x0.7 screws (I), screw from behind the camera attachment to secure the camera.
- For video bar attachment: Following the camera’s screw pattern and using m4x0.7 screws (I) (screw quantity varies from [x2-4] based on the specific camera), screw from behind the camera attachment tosecure the camera
Have a question?
- Contact us at support@avteqinc.com
- avteqinc.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>