Tranquillus II Luxury Bidet Toilet Seat Instruction Manual

Tranquillus II Luxury Bidet Toilet Seat

Specifications

• Model: Tranquillus II Electric Bidet Seat
• Manufacturer: Unknown
• Address: 493 Old Trenton Road, East Windsor, NJ 08512

Before Installation
Read the manual thoroughly for a better understanding of the bidet functions. Keep the manual handy for future reference.

Installation Procedures
Follow the step-by-step instructions provided in the manual for installing the main unit.

How to Operate

• Ensure the bidet is functioning properly before use.
• Adjust the settings using the control panel for a personalized experience.
• For sitz bath, enjoy constant hot water.
• Use the adjustable nozzle position for convenience.
• Press the KID/AUTO button twice for automatic operation.
• Press the TURBO button (HI) for maximum water pressure during WASH or BIDET.

How to Clean & Maintain
Regularly clean the bidet seat with a mild detergent and soft cloth. Avoid harsh chemicals. Follow the cleaning instructions provided in the manual.

Self-Diagnosis
The bidet has a built-in diagnosis system that automatically checks its functions. Refer to the manual for troubleshooting tips.

FAQ

1. Q: What should I do if the bidet is not functioning properly?
   A: Unplug the bidet and contact customer service for assistance.

2. Q: Can I connect the bidet to a hot tap?
   A: No, connect the bidet hose to the cold tap to avoid burns or damage to the filter.

Thank You
Thank you for purchasing the Tranquillus II Electric Bidet Seat. Please read this manual thoroughly to get a better understanding of the functions of this bidet to get the best use out of it.
Keep this manual handy for future reference.

Caution
Children and those needing assistance may require supervision

Avoid the use of chemicals or harsh materials while cleaning
Do not force close the seat or the lid

Operational Features

• Sitz Bath
  Users can enjoy a sitz bath with constant hot water.

• Nozzle Movement for Soft & Wide Cleansing
  Allow the spray to gently cleanse thoroughly.

• Heated Seat
  Adjust the temperature of the bidet seat to 4 levels (up to 108°F), which makes it comfortable to use in the winter.

• Built-In Diagnosis System
  The bidet diagnoses its functions automatically with a built–in checking system – micro computer.

• Energy Saving
  When not in use, water and seat temperature lower automatically to the preheating level, minimizing power consumption.

• Soft Close Lid / Seat
  The lid and seat close smoothly and gradually.

• Adjustable Nozzle Position
  The nozzle is adjustable for user’s convenience.

• Adjustable Air And Water Temp.
  Warm air dries the area neatly after cleansing. The temperature is adjustable by 8 levels up to 140°F.

• Kids Only
  Automatic: The main functions operate automatically in sequence: Cleansing (for WASH), Drying then Deodorization. Press the KID / AUTO button two times.

• Automatic
  The main functions operate automatically in sequence: Cleansing (for WASH or BIDET), Drying then Deodorization. Press the KID / AUTO button two times.

• Bubble Cleansing
  Enjoy smooth, refreshing and tidy cleansing with bubbles mixed in the water.

• Turbo
  While using WASH or BIDET, press the TURBO button (HI) for the maximum water pressure.

• Purifying Filter
  Impurities in the tap water are filtered out to protect the inside of the bidet and to ensure clean cleansing.

• Air Pump Motor
  An air pump motor ensures constant water pressure regardless of tap water pressure.

• Nozzle Cleaning
  To clean the nozzle, press the NOZZLE CLEAN button. To clean the nozzle manually, press the button two times. Press the button STOP to return to the original position.

Main Unit and Functions

Control Panel

Digital Display Default Settings

You may set the temperature of the dry air, the heated seat and water as well as set the water pressure on the control panel. These settings will be remembered until you reset them.

Main Unit and Accessories

MAIN UNIT

Before Installation

Detach Existing Toilet Seat and Lid First

1. Remove the seat fasteners and detach the toilet seat and lid.
2. Turn the water supply valve off and detach the toilet tank connection hose from the valve.

CONNECT T-ADAPTOR
Connect the T-Adaptor to the water supply valve.

CONNECT T-ADAPTOR
Connect the T-Adaptor to the toilet tank (cistern) with the flexible hose.

Installation Procedures

CONNECT WATER PURIFYING FILTER

1. Fix the connection tubing hose into the T-Adaptor and fix a nipple (2 caps) into the hose.
2. Push the water filter into the nipple and insert a nipple (1 cap) into the filter it the nipple (1 cap) onto the bidet.
3. Push down the end of the nipple pull back the connection hose

INSTALLING FIXING PLATE

1. Press the detachment hook on the right side of the product, and pull back the fixing plate.
2. Insert 2 fixing rubbers to the sanitary ware’s hole and put on fixing plate and 2 brackets on the sanitary ware. Fasten the 2 fixing bolts by using a screwdriver.

NOTE: The bracket is adjustable between 5.5 ~ 10 inches in width and 2 inches in length.

Installation of Main Unit

1. Push the bidet into the fixing plate until it “clicks”.
2. Insert the nipple into the bidet.

How to Operate

POWER CONNECTION

Check voltage in your home, then plug cable into a proper outlet.

Press the button WASH 1-2 minutes after plugged in.

Note T o operate WASH or BIDET, the seat should be occupied.
Or press the right middle part of the seat with the hand.

• Check if there may be any leakage from the connection hose or the main unit

Manual Cleaning Guide

Troubleshooting

Water does not come out

| Water supply is shut off|

• Water should be supplied, wait 10 mins after installation.
• Turn ON water supply.

Water is not flowing|

• The water tank is not filled The shut off valve is closed.

|

• Turn on valve.
• The water pressure level is set to “LOW”.Turn to HIGH.

Bidet will not turn on|

• Disconnect power cord, wait 1 minute and try again.
• Seat is not being used.

|

• Place hand on seat to test or sit on seat for unit to turn on. Press On button and try again.

Water is not hot|

• Water temperature button is set to “LOW”.
• Water supply has been used completely.

|

• Wait for water supply to reheat, as you would wait for a shower to get hot.

WARRANTY

1. If there is a manufacturer’s error during the period of warranty, A/S is free of charge. The warranty period is l year after purchase.
2. Call the service center in case of any malfunctions.
3. A/S will be charged during period of warranty under these circumstances:
   • Mishandling, wrongful remodeling or alteration of product,
   • Malfunctions due to incorrect usage and installation.
4. A/S after the warranty period : A/S is available at a service center with a charge.
5. Please present this warranty for free A/S (will be charged if warranty is lost).

ABOUT WARRANTY

1. When buying a product, fill in the warranty and retain if needed for your records,
2. This product is designed to guarantee customer satisfaction,
3. Even during period of warranty, A/S will be charged (labor cost + parts cost + transportation cost) under the following circumstances.

NOT COVERED BY WARRANTY

• Customer’s carelessness.
• Use of wrong outlet for voltage type.
• When repaired by another party or entity.
• Natural disaster (fire, flood, etc.)
• Malfunction due to mishandling or alteration made by customer.
• Faulty electrical circuit trips and damages product.

493 Old Trenton Road, East Windsor New Jersey, 08512, USA info@medschenker.com (201)-482-9835

SPECIFICATIONS

bracket 2, fixing rubbers 2
Water supply| T-adaptor 1+packing 1, connection (tubing) hose 1,flexible hose 1

• packing 1, nipple (2 caps) 1, nipple (t cap) 1, water filter 1

The specification could be changed without prior notice for product improvement.

MANUFACTURED FOR

493 Old Trenton Road, East Windsor New Jersey, 08512, USA info@medschenker.com (201)-482-9835

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>