PEDROLLO FG2-32-160C 733 Inch Standardised Centrifugal Pumps Owner’s Manual

PEDROLLO FG2-32-160C 733 Inch Standardised Centrifugal Pumps

Specifications

• Product Name: FG EN 733 Standardised Centrifugal Pumps
• Usage: Clean water Civil use, Industrial use, Agricultural use

Product Usage Instructions

Installation

1. Ensure the pump is placed on a stable and level surface.
2. Connect the necessary piping according to the system requirements.
3. Securely fasten the pump using appropriate fixtures.

Operation

1. Prime the pump by filling it with water before starting.
2. Turn on the power supply and adjust the settings as needed.
3. Monitor the pump during operation for any unusual noises or vibrations.

Maintenance

1. Regularly check for leaks and worn-out parts.
2. Clean the pump and its components to prevent clogging.
3. Follow the manufacturer’s guidelines for scheduled maintenance tasks.

FAQ

• Q: Can this pump handle hot water?
• A: The pump is designed to handle liquids with higher or lower temperatures. For specific temperature limits, refer to the product specifications or consult with the manufacturer.

PERFORMANCE RANGE

• Flow rate up to 5750 l/min (345 m3/h)
• Head up to 98 m

INSTALLATION AND USE

Standardized centrifugal pumps equipped with a support structure and built according to EN733 standards.
Designed to transfer clean water free from abrasive particles and liquids that will not damage the pump’s components.

• Water supply
• Pressurization
• Irrigation
• Firefighting systems
• Industrial applications
• Agriculture applications
• Civil, industrial, and agricultural applications
• Air conditioning, cooling, heating, and circulation systems

APPLICATION LIMITS

• Manometric suction head up to 7 m
• Liquid temperature between -10 °C and +90 °C
• Maximum pressure in the pump body 10 bar (PN10)

AVAILABLE UPON REQUEST

• Mechanical seal options available
• Pumps for motors with 60 Hz frequency
• Handling of liquids with higher or lower temperatures
• Adaptability to operate in high or low-temperature environments
• Counter flange KIT including screws, nuts and gaskets

PERFORMANCE RANGE – n= 2900 min-1

PERFORMANCE DATA – n= 2900 min-1

TYPE| MOTOR TO BE COUPLED| PERFORMANCE

n= 2900 min-1

---|---|---

kW

|

HP

| Q

m³/h

| H

m

| Q

m³/h

| H

m

| Q

m³/h

| H

m

FG2- 32/160C| 1.5| 2| 6| 24| 16| 19.8| 21| 14
FG2- 32/160B| 2.2| 3| 6| 30| 18| 23.6| 24| 17
FG2- 32/160A| 3| 4| 6| 37| 20.4| 30.2| 27| 24
FG2- 32/200C| 4| 5.5| 6| 44| 27| 31.5| 27| 31.5
FG2- 32/200B| 5.5| 7.5| 6| 51| 28| 37.7| 30| 36
FG2- 32/200A| 7.5| 10| 6| 57| 29| 45.3| 30| 44
FG2- 32/200BH| 3| 4| 6| 45| 17| 38.4| 18| 37
FG2- 32/200AH| 4| 5.5| 6| 55| 18| 46.1| 19.2| 44
FG2- 32/250C| 9.2| 12.5| 6| 75| 28| 58.6| 27| 60
FG2- 32/250B| 11| 15| 6| 87| 32| 67.6| 30| 70
FG2- 32/250A| 15| 20| 6| 97| 35| 73.6| 30| 80
FG2- 40/125C| 1.1| 1.5| 6| 16| 23| 12.0| 33| 6
FG2- 40/125B| 1.5| 2| 6| 20.5| 26| 15.1| 36| 9
FG2- 40/125A| 2.2| 3| 6| 26| 29| 19.3| 42| 10
FG2- 40/160C| 2.2| 3| 6| 27| 25| 22.0| 36| 14
FG2- 40/160B| 3| 4| 6| 32| 27| 25.9| 36| 20
FG2- 40/160A| 4| 5.5| 6| 38| 30| 30.2| 42| 20
FG2- 40/200B| 5.5| 7.5| 6| 47| 33| 36.3| 42| 28
FG2- 40/200A| 7.5| 10| 6| 55| 36| 46.2| 42| 41
FG2- 40/250C| 9.2| 12.5| 6| 64| 39| 49.9| 42| 47
FG2- 40/250B| 11| 15| 6| 71| 40| 56.8| 42| 55
FG2- 40/250A| 15| 20| 6| 88| 42| 72.0| 42| 72
FG2- 50/125C| 2.2| 3| 18| 17.5| 49| 13.0| 72| 6
FG2- 50/125B| 3| 4| 18| 20.7| 51| 15.6| 72| 9
FG2- 50/125A| 4| 5.5| 18| 23.5| 55| 18.4| 72| 13
FG2- 50/160C| 4| 5.5| 18| 27| 48| 20.7| 60| 16
FG2- 50/160B| 5.5| 7.5| 18| 32| 52| 26.3| 72| 18
FG2- 50/160A| 7.5| 10| 18| 37| 54| 32.1| 81| 20
FG2- 50/200C| 11| 15| 24| 44| 82| 37.0| 102| 30
FG2- 50/200B| 15| 20| 24| 52| 86| 43.7| 102| 38
FG2- 50/200A| 18.5| 25| 24| 61| 91| 52.0| 108| 45
FG2- 50/200AR| 22| 30| 24| 69| 96| 58.2| 108| 53
FG2- 50/250D| 9.2| 12.5| 18| 51| 53| 37.6| 54| 37
FG2- 50/250C| 11| 15| 18| 59| 60| 43.0| 60| 43
FG2- 50/250B| 15| 20| 18| 72| 60| 59.0| 60| 59
FG2- 50/250A| 18.5| 25| 18| 85| 60| 73.0| 60| 73
FG2- 50/250AR| 22| 30| 18| 95| 60| 83.0| 60| 83
TYPE| MOTOR TO BE COUPLED| PERFORMANCE

n= 2900 min-1

---|---|---

kW

| ****

HP

| Q

m³/h

| H

m

| Q

m³/h

| H

m

| Q

m³/h

| H

m

FG2- 65/125C| 4| 5.5| 36| 16| 96| 12.6| 108| 11
FG2- 65/125B| 5.5| 7.5| 36| 18| 101| 15.4| 120| 13
FG2- 65/125A| 7.5| 10| 36| 23| 108| 20.9| 132| 18
FG2- 65/160C| 9.2| 12.5| 36| 32| 108| 27.0| 132| 22
FG2- 65/160B| 11| 15| 36| 36.5| 113| 30.3| 144| 23
FG2- 65/160A| 15| 20| 36| 40.5| 114| 35.0| 144| 28
FG2- 65/200B| 15| 20| 12| 44| 129| 34.4| 144| 30.5
FG2- 65/200A| 18.5| 25| 12| 50| 143| 38.4| 150| 36.5
FG2- 65/200AR| 22| 30| 12| 57| 136| 47.0| 156| 42
FG2- 65/250C| 30| 40| 24| 76| 111| 64.7| 141| 53
FG2- 65/250B| 37| 50| 24| 87| 120| 74.3| 150| 62
FG2- 65/250A| 45| 60| 24| 95| 126| 80.7| 156| 68
FG2- 80/160D| 11| 15| 30| 25| 171| 19.1| 240| 10
FG2- 80/160C| 15| 20| 30| 30| 178| 23.4| 240| 15
FG2- 80/160B| 18.5| 25| 30| 35| 185| 27.7| 240| 20
FG2- 80/160A| 22| 30| 30| 40| 190| 32.1| 240| 25
FG2- 80/200B| 30| 40| 30| 56| 166| 46.5| 219| 34.5
FG2- 80/200A| 37| 50| 30| 62| 180| 53.0| 234| 40
FG2- 80/250B| 45| 60| 36| 77| 170| 65.9| 216| 54
FG2- 80/250A| 55| 75| 36| 88.5| 180| 77.3| 234| 60
FG2- 100/160C| 15| 20| 60| 30| 220| 20.3| 300| 12
FG2- 100/160B| 18.5| 25| 60| 34| 234| 23.1| 312| 14.5
FG2- 100/160A| 22| 30| 60| 38| 250| 26.4| 330| 17.5
FG2- 100/200C| 30| 40| 48| 51| 216| 39.6| 279| 28
FG2- 100/200B| 37| 50| 48| 57| 228| 44.5| 294| 33
FG2- 100/200A| 45| 60| 48| 63| 245| 50.6| 315| 38
FG2- 100/250B| 55| 75| 48| 75| 250| 62.0| 309| 48
FG2- 100/250A| 75| 100| 48| 89| 270| 76.0| 345| 58

• Q = Flow Rate
• H = Total manometric head

Performance curves comply with EN ISO 9906 Grade 3B tolerance limits.

PERFORMANCE RANGE – n= 1450 min-1

PERFORMANCE DATA – n= 1450 min-1

TYPE| MOTOR TO BE COUPLED| PERFORMANCE

n= 1450 min-1

---|---|---

kW

|

HP

| Q

m³/h

| H

m

| Q

m³/h

| H

m

| Q

m³/h

| H

m

FG4- 32/160C| 0.25| 0.33| 3| 6| 8| 4.8| 10.5| 3.5
FG4- 32/160B| 0.37| 0.5| 3| 7.5| 9.9| 5.6| 12| 4.5
FG4- 32/160A| 0.37| 0.5| 3| 9| 10.5| 6.8| 13.5| 5
FG4- 32/200C| 0.55| 0.75| 3| 11| 12| 8.5| 13.5| 8
FG4- 32/200B| 0.75| 1| 3| 12.5| 13.8| 9.5| 15| 9
FG4- 32/200A| 1.1| 1.5| 3| 14| 14.4| 10.8| 15| 10.5
FG4- 32/200BH| 0.75| 1| 3| 11.3| 8.4| 9.6| 9| 9.2
FG4- 32/200AH| 0.75| 1| 3| 13.8| 9| 11.5| 9.6| 11
FG4- 32/250C| 1.1| 1.5| 3| 18.4| 13.5| 14.8| 13.2| 15
FG4- 32/250B| 1.5| 2| 3| 21.7| 15| 17.4| 15| 17.4
FG4- 32/250A| 2.2| 3| 3| 23.8| 16.2| 18.7| 16.2| 18.7
FG4- 40/160C| 0.37| 0.5| 3| 6.5| 12| 5.5| 18| 3.5
FG4- 40/160B| 0.37| 0.5| 3| 7.5| 13.2| 6.0| 19.2| 3.5
FG4- 40/160A| 0.55| 0.75| 3| 9| 14.7| 7.1| 21| 4.5
FG4- 40/200B| 0.75| 1| 3| 11.5| 16.8| 8.9| 21| 7
FG4- 40/200A| 1.1| 1.5| 3| 13.8| 18.6| 10.9| 21| 10
FG4- 40/250C| 1.1| 1.5| 3| 15.5| 19.2| 12.4| 24| 10
FG4- 40/250B| 1.5| 2| 3| 17.5| 19.8| 14.2| 24| 12
FG4- 40/250A| 2.2| 3| 3| 22| 22.8| 17.5| 24| 17
FG4- 50/125C| 0.37| 0.5| 9| 4| 24.5| 3.3| 36| 1.5
FG4- 50/125B| 0.55| 0.75| 9| 5| 25.2| 4.0| 36| 2
FG4- 50/125A| 0.55| 0.75| 9| 6| 27| 4.8| 36| 3
FG4- 50/160C| 0.55| 0.75| 9| 7| 25| 5| 30| 4
FG4- 50/160B| 0.75| 1| 9| 8| 26.4| 6.5| 39| 3.8
FG4- 50/160A| 1.1| 1.5| 9| 9.3| 27.6| 7.8| 42| 4.5
FG4- 50/200C| 1.5| 2| 12| 11| 39.6| 9.3| 51| 7.5
FG4- 50/200B| 2.2| 3| 12| 13| 43.2| 10.9| 51| 9.5
FG4- 50/200A| 2.2| 3| 12| 15| 46.2| 12.8| 54| 11.2
FG4- 50/200AR| 3| 4| 12| 17| 48| 14.5| 54| 13.2
FG4- 50/250D| 1.1| 1.5| 9| 12.5| 25.5| 10.1| 39| 5
FG4- 50/250C| 1.5| 2| 9| 14| 27| 11.2| 42| 5
FG4- 50/250B| 2.2| 3| 9| 18| 30.6| 14.6| 42| 10.5
FG4- 50/250A| 2.2| 3| 9| 20| 33| 16.3| 42| 13
FG4- 50/250AR| 3| 4| 9| 23.5| 34.2| 19.9| 42| 17
TYPE| MOTOR TO BE COUPLED| PERFORMANCE

n= 1450 min-1

---|---|---

kW

| ****

HP

| Q

m³/h

| H

m

| Q

m³/h

| H

m

| Q

m³/h

| H

m

FG4- 65/125C| 0.55| 0.75| 18| 4| 48| 3.2| 5.4| 2.5
FG4- 65/125B| 0.75| 1| 18| 4.7| 54| 3.8| 66| 3
FG4- 65/125A| 1.1| 1.5| 18| 5.7| 60| 4.7| 72| 4
FG4- 65/160C| 1.1| 1.5| 18| 8| 54.6| 6.7| 66| 5.5
FG4- 65/160B| 1.5| 2| 18| 9.1| 57| 7.6| 72| 5.7
FG4- 65/160A| 2.2| 3| 18| 10.1| 59.4| 8.5| 72| 7
FG4- 65/200B| 2.2| 3| 6| 10.7| 64.5| 8.5| 72| 7.3
FG4- 65/200A| 2.2| 3| 18| 12| 66| 9.6| 75| 8.5
FG4- 65/200AR| 3| 4| 18| 14| 68.4| 11.2| 78| 10
FG4- 65/250C| 3| 4| 12| 19| 55.5| 16.2| 70.5| 13
FG4- 65/250B| 4| 5.5| 12| 21.8| 58.8| 18.8| 75| 15.5
FG4- 65/250A| 5.5| 7.5| 12| 23.5| 60| 20.6| 78| 17
FG4- 80/160D| 1.5| 2| 18| 6.3| 84| 4.8| 120| 2.5
FG4- 80/160C| 2.2| 3| 18| 7.5| 88.8| 5.7| 120| 3.8
FG4- 80/160B| 2.2| 3| 18| 8.8| 94.8| 6.8| 120| 5
FG4- 80/160A| 3| 4| 18| 10| 99.6| 7.7| 120| 6.2
FG4- 80/200B| 4| 5.5| 18| 14| 92.4| 10.9| 108| 9
FG4- 80/200A| 5.5| 7.5| 18| 15.5| 97.5| 12.6| 114| 10.5
FG4- 80/250B| 5.5| 7.5| 18| 19.5| 90| 16.1| 108| 13.5
FG4- 80/250A| 7.5| 10| 18| 22| 84| 19.9| 117| 15
FG4- 100/160C| 2.2| 3| 24| 7.5| 110| 5| 144| 3
FG4- 100/160B| 2.2| 3| 24| 8.3| 117| 5.7| 156| 3.5
FG4- 100/160A| 3| 4| 24| 10| 124| 6.9| 168| 4.7
FG4- 100/200C| 4| 5.5| 24| 12.7| 111| 9.6| 138| 7
FG4- 100/200B| 5.5| 7.5| 24| 14.2| 117| 10.9| 144| 8.5
FG4- 100/200A| 5.5| 7.5| 24| 15.8| 123| 12.6| 156| 9.5
FG4- 100/250B| 7.5| 10| 24| 18.5| 117| 15.9| 156| 11.5
FG4- 100/250A| 9.2| 12.5| 24| 22| 126| 19.3| 174| 13.5

• Q = Flow Rate
• H = Total manometric head

Performance curves comply with EN ISO 9906 Grade 3B tolerance limits.

DIMENSIONS AND WEIGHT

50

| ****

32

| ****

80

| ****

360

| 132| 160| 55| 96| ****

71

| ****

240

| ****

190

| ****

14

| ****

14

| ****

260

| ****

100

| ****

50

| ****

24

| ****

8

| ****

27

| 33.0
FG 32/200| 160| 180| 55| 95| 38.1
FG 32/200H| 160| 180| 55| 36.9
FG 32/250| 100| 180| 225| 65| 125| 95| 320| 250| 53.0
FG 40/125| ****

65

| ****

40

| 80| 112| 140| 50| ****

100

| ****

70

| 210| 160| 30.4
FG 40/160| 132| 160| 240| 190| 34.1
FG 40/200| ****

100

| 160| 180| 55| 265| 212| 40.2
FG 40/250| 180| 225| 65| 125| 95| 320| 250| 59.2
FG 50/125| ****

65

| ****

50

| 132| 160| 50| ****

100

| ****

70

| 240| 190| 33.0
FG 50/160| 160| 180| 55| 265| 212| 38.3
FG 50/200| 160| 200| 50| 50.3
FG 50/250| 180| 225| 65| ****

125

| ****

95

| 320| 250| 57.0
FG 65/125| ****

80

| ****

65

| 160| 180| 65| 280| 212| 45.2
FG 65/160| 160| 200| 65| 48.0
FG 65/200| 180| 225| 65| 320| 250| ****

140

| 55.1
FG 65/250| 470| 200| 250| 80| 160| 120| 360| 280| 18| 340| 80| 32| 10| 35| 82.4
FG 80/160| 100| 80| ****

125

| 360| 180| 225| 65| 125| 95| 320| 250| 14| 260| 50| 24| 8| 27| 53.0
FG 80/200| 470| 180| 250| 65| 345| 280| 340| 80| 32| 10| 35| 72.0
FG 80/250| 200| 280| 80| ****

160

| ****

120

| 400| 315| ****

18

| 91.1
FG 100/160| 125| 100| 360| 200| 280| 80| 360| 280| 260| 50| 24| 8| 27| 76.3
FG 100/200| 470| 200| 280| 80| 340| 80| 32| 10| 35| 82.1
FG 100/250| 140| 225| 280| 80| 400| 315| 96.0

PORT FLANGES

DN FLANGE

mm

| D

mm

| K

mm

| HOLES
---|---|---|---
N°| Ø (mm)
32| 140| 100|

4

|

18

40| 150| 110
50| 165| 125
65| 185| 145
80| 200| 160|

8

100| 220| 180
125| 250| 210

COUNTER-FLANGE
(CAN BE ORDERED SEPARATELY)

DN FLANGE

mm

| F

COUNTER-FLANGE

| D

mm

| K

mm

| HOLES
---|---|---|---|---
N°| Ø (mm)
32| 1¼”| 140| 100|

4

|

18

40| 1½”| 150| 110
50| 2″| 165| 125
65| 2½”| 185| 145
80| 3″| 200| 160|

8

100| 4″| 220| 180
125| 5″| 250| 210

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>