hardoll SWL-06CW-4 Solar Decoration Lamp Instruction Manual
- June 14, 2024
- hardoll
Table of Contents
hardoll SWL-06CW-4 Solar Decoration Lamp
Structure Diagram
Features
- Solar Panel Output : 2V/0.3W
- Battery: Ni-MH Battery, 1.2V/600mAh
- Size : 3.9 x 2.9 x 2 inch
- Light Sources: 6 PCS SMD2835 LED
- Color Temperature: 6000K / 3200K
- Charching time: 4.5h Hours
- IP Rating : IP65
- Working Temperature: -20-60°C
- Housing Material: ABS
Notice:
- Pleases peel off protective film and charge the light with sunlight for 8 hours before first use.
- The switch need to be at “ON” position so that the light could be charged normally. If at “OFF” position, the light won’ t charge.
- The light will not turn on in daytime or in any other lighting coverage, as solar panel has light sensor in it. Please make sure solar panel away other lighting coverage at night. You can cover the solar panel by hand to test the light.
- Install the light in a location that can receive 5-8 hours of sunlight, and away from the shade caused by trees, buildings and etc.
Easy Installation
- Set the switch at “ON” position.
- Choose a place that make sure solar panel can receive 5-8 hours of sunlight.
- Drill holes and place expansion pillar-hinges into wall.
- Use metal screws to fix the light.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>