occiam T18 True Wireless Sports Earbuds User Manual

occiam T18 True Wireless Sports Earbuds

Product Specifications

• Model No.: T18
• Supports Profile: HSP/HFP/A2DP/AVRCP
• Charging Port: Type-C
• Input: 5V 1A

Product Usage Instructions

Prior to first use or after a long period of non-use, charge both earbuds and the charging case using the supplied Type-C Charging Cable.

• Take out the twin earbuds from the charging case. They will automatically power on and enter pairing mode.
• The LED indicator of the vice earbud goes off, while the LED indicator of the master earbud flashes white slowly.
• Connect with your device by searching for T18 in the Bluetooth settings.
• If you encounter issues like one side playing music or the inability to use both earbuds together, follow these steps to reset:
• Deactivate Bluetooth on all nearby devices.
• Press and hold either earbud for 3 seconds to power off.
• Quickly press the button of both earbuds 5 times until the LED indicator flashes 3 times quickly.
• You can use one earbud alone by leaving the other in the charging case. To switch back to stereo mode, take out both earbuds.
• Gently push the earbuds into your ears and adjust for a comfortable fit.

FAQ

• Q: When should I reset the earbuds?
• A: You should reset the earbuds when only one side plays music or when you cannot use both earbuds together.
• Q: How do I connect the earbuds to other devices?
• A: Deactivate Bluetooth on all devices nearby, pick up both earbuds from the charging case, and search for T18 in the Bluetooth settings of your new device.

What’s in the box?

Note: Please Remove the Protective Films of The LED Power Display and Charging Contacts before using LT.

Overview

Product Parameters

Charging Case: 2200mAh 3.7v, 8.14Wh
Earbuds Battery Life| 12h on a single charge
Charging Time| 1h-1.5h for earbuds
2.5h for charging case
Transmission Range| 33 feet (with no obstacle)

Bluetooth Connection

Prior to first use (or not in use for a long time), please charge both earbuds and charging case with the supplied Type-C Charging Cable.

• Step 1 Take twin earbuds out from the charging case, they will automatically power on and enter pairing mode.
• At this time, the LED indicator of the vice earbud goes off, and the led indicator of the master earbud flashes white slowly.
• Step 2-Activate the Bluetooth setting on your phone, search and connect “T18”.
• Once connected, the led indicator of the master earbud goes off.

Note: If the earbuds are not connected to your device over 3 minutes, the earbuds will power off.

For The Second Time and Subsequent Using

• lf your device has already connected with the earbuds, in the second time using, when you take out the earbuds from the charging case, they will connect with your device automatically.

Connect with Other Devices

lf you want to connect the earbuds to other devices, there are three methods as below:

1. Delete”T18″ on the Bluetooth list of the previous connected device.
2. Before they connect to other devices, please turn off the Bluetooth of the previously connected device.
3. Reset the earbuds.

Mono Mode (Only Left/Right Earbud is being Used)

You can use one earbud alone, leaving another earbud in the charging case.Turn on the Bluetooth on your device, search “T18” and click to connect.

• Note: lf you want to get them back to stereo mode from mono mode, please take out both earbuds.

Factory Restore Setting

When should l reset?

• When should l reset? When only one side plays music.
• When you can’t use the two earbuds together.
• When both earbuds fail to pair with each other or connection-related issues.

How to reset？

• Step 1: Deactivate the Bluetooth setting of all devices nearby the earbuds.
• Step 2: Pick up two earbuds from the charging case, the earbuds will power on automatically.
• Step 3: Quickly press 5 times on the button of both earbuds until the earbud led indicator flashes 3 times quickly ( lf you wear the earbud, you will hear a voice prompt “power off” ), then the earbud will power off, which means resetting the finished.

Note: After resetting, the pairing record between the earbuds and all your devices will be cleared. In case there is any unsuccessful message in your devices, please consider deleting the historical record of T18, and try the pairing process again.

Power On/ Power Off

Auto Power On

• Take out the earbuds from the charging case, the earbuds will automatically power on and start pairing.

Auto Power Off

• Put the earbuds back into the charging case, the earbuds will automatically power off and enter charging mode.

Manual Power On

• lf the earbuds are not in the charging case, press and hold each earbud for 3 seconds.

Manual Power Off

• lf the earbuds are not in the charging case, press and hold either earbud for 5 seconds.
• (Before manually powering off, pls disconnect the Bluetooth connection)

How to wear

• Gently push the earbuds into your ear and adjust the earbuds to get a comfortable fit.

Functions

For Music

[Functions on “R Earbud”]

• Play/Pause: Click Once
• Next Track: Quick Double-Click
• Volume +: Long Press MFB

[Functions on “L Earbud”]

• Play/Pause: Click Once
• Previous Track: Quick Double-Click
• Volume -: Long Press MFB

Note: In mono mode, a single earbud does not support volume adjustment.

For Call

• Answer Call: Click Once

• End Call: Click Once

• Reject Call: Long Press 2S

• Switch to the third-party call while hanging up your current call: Click Once

• Deline the third-party call and keep your current call: Long Press MFB

Voice Assistance

• Activate Siri or other voice assistances: Quick Triple-Click

Earbuds Charging

Low Battery Alert

• When the battery power is less than 10% ( and the voltage is lower than 3.3V ), a voice prompt “Low Battery” will be advised.
• After several times of low battery alert, the earbuds will shut down as normal.

Earbuds Charging

• Put the earbuds into the charging case, they will power off & be charged. When the earbud led indicator flashes a white light, it means that the earbud is being charged from the charging case, meanwhile, the led bar for the earbud on the charging case flashes a white light from 1st grid to the 4th gird repeatedly.
• Once fully charged, the earbud led indicator will turn off, and the led bar for the earbud on the charging case will be off too.

Charging Warning

1. After a while, the earbuds don’t charge or even can’t turn on because there may be an oxidized layer or something else on the charging connection or charging pin. You can handle this problem by using an alcohol rag to clean the magnet connector on the earbuds and the charging pin on the charging case.
2. Earbuds can automatically turn off immediately meanwhile start charging when you put them back into the charging case. Also, they will automatically power on and pair when being picked up.

How to connect devices

Windows 10

• Step ①: Open Settings, then press “Window Key +l” and click on the “Device”
• Step ②: Go to the left-pane menu and click “Bluetooth & other device”
• Step ③: Under “Mouse, keyboard, open”, you will see a battery percentage indicator on the right side.

Mac
OPTION 1

• Step ①: Click the Apple icon and then “System Preferences” from the menubar.
• Step ②: select “Bluetooth.”
• Step ③: Mark the checkbox for “Show Bluetooth” in the menu bar.
• Step ④: To check battery levels, click the “Bluetooth” button from the menu bar. Select your device and the pop-out menu will display the battery level.

OPTION 2: OTHER DEVICES(E.G.MAGIC KEYBOARD)

• step ①: Click the Apple icon > System Preferences from the menu bar.
• step ②: select the Keyboard.
• step ③: At the bottom of the window, you’ll see the Keyboard battery level.

Android Phone

• Step 1: Pair and connect a Bluetooth device to your Android phone.
• Step 2: Open up the Settings app and go to “Correct Devices.”
• Step 3: Tap on the word “Bluetooth” (not the switch next to it) and you will see a complete list of all connected devices and their battery level.

Compatible Bluetooth Devices on iOS Phone

• Step 1: Open the Bluetooth function of your phone and pair your Bluetooth device.
• Step 2: Open the “Today view” Settings and click the “Edit” button.
• Step 3: Once in the “Add Widgets” menu, tap the green plus (+) icon next to the “Batteries “widget under” More Widgets”.
• Step 4: Then you can check the battery using the situation on “Today view”.

Charging Case Charging

Type-C USB Charging

There is a Type-C usb charging cable in the small white box of the package box. Please use the 5V-1A adapter with a type-C charging cable to charge the charging case. During Charging, the charging case led power display will flash and display the battery in real time. After a full charge, the number is displayed as 100.

Type A USB Charging

• When charging a cell phone, please use Type A to connect the charging case.

Battery Warning

Using the wrong battery can cause fire and other hazards (for example, in the case of some lithium battery types).

1. Disposal of a battery into a fire or a hot oven, or mechanically crushing or cutting of battery, that can result in an explosion.
2. Do not leave a battery in an extremely high temperature surrounding environment that can resuilt in an explosion or the leakage of flammable liquid or gas.
3. A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

Storage and Maintenance

1. If the earbuds have been unused for more than 3 months, we recommend that you charge them.

2. Please use chargers that are FCC (Federal Communications.
   Commission) approved.

3. Do not disassemble the Earbuds.

4. Adult supervision is required for children aged 6 and under.

5. Do not expose the earbuds in high or low temperatures, do not use the earbuds in a thunderstorm storm. Avoid falling or violent impact of the device. Keep the device away from fire, do not put the device in water.

6. Do not use oil or any volatile liquid to clean this product.

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>