rapoo Ralemo Pre 5 Wireless Mechanical Keyboard User Manual
- June 5, 2024
- rapoo
Table of Contents
rapoo Ralemo Pre 5 Wireless Mechanical Keyboard
Overview
- MAC indicator
- Caps Lock indicator
- Bluetooth indicator
- Charging/ Low Battery indicator
Package contents
- Mechanical Keyboard X 1
- User Manual x 1
- USB-A to USB-C cable X 1
- use Receiver x 1
Combination keys
- Fn + Fl= reduces backlight brightness
- Fn + F2= increases backlight brightness Fn + F3 = Homepage (only Windows)
- Fn + F4 = E-mail (only Windows)
- Fn + FS = Multimedia player (only Windows) Fn + F6 = Previous Track
- Fn + F7 =Play/ Pause
- Fn + FS = Next Track
- Fn+ F9 = Mute
- Fn + FlO = Volume
- Fn + Fll = Volume+
- Fn + F12 = Windows/Mac mode Fn +DEL= PrtSc function
- Fn + 1 = Bluetooth mode 1
- Fn + 2 = Bluetooth mode 2
- Fn + 3 = Bluetooth mode 3
- Fn + 4 = 2.4GHz mode
- Fn + 5 = Wired mode
In Mac mode: the Windows key is used as OPTION key and the ALT key is used as COMMAND key.
Lighting effect
Fn + Ctrl _Right = changing the mode of the backg round illumination. Ripple, Static, Custom, Star and Wave.
LED Status
- Mac indicator: It keeps on in Mac mode and goes off in Windows mode.
- Caps Lock indicator: Indicator is on when upper case letters are activated, and goes off when lower case letter are activated.
- Bluetooth indicator: Bluetooth 1: Red, Bluetooth 2: Green, Bluetooth 3: Blue, 2.4 GHz: White.
- Charging/ Low Battery indicator: the indicator stays white for 5 seconds when the power is on, the indicator flashes white slowly when the battery is low, the indicator Stays red while charging, and it turns off when charging is complete.
- Keyboard backlight flashes when the voltage is low.
Wired Mode
Connect the included cable into the keyboard and into a USB port on your
computer. Press Fn + 5 to activate the wired mode.
2.4GHzmode
Plug the included USB receiver into a USB port on your computer.
Press Fn + 4 to activate 2.4 GHz mode.
Bluetooth pairing
-
Press and hold the Bluetooth mode 1, 2 or 3 key combination (Fn + 1/2/3) for more than 3 seconds to connect a new device. The Bluetooth indicator will flash red/green/blue and the keyboard will be discoverable for 60 seconds.
-
Follow the instructions below to complete Bluetooth pairing on your device.
The Bluetooth indicator will tum off when the connection is successful. -
Open the Bluetooth settings on your device.
-
Select “Rapoo 3.0KBM or “Rapoo 5.0KB” from the list.
Switching among paired devices
To switch between connected devices, briefly press the Fn + 1, Fn + 2, Fn + 3,
Fn + 4 or Fn + 5 key combinations.
You can connect the keyboard with up to 5 devices at the same time. (3 devices
via Bluetooth, 1 device via cable and 1 device via USB receiver).
System requirements
Win dowse 7 /8/10, Mac OS X 10.4 or later
Warranty conditions
This device is covered by a 2-year limited hardware warranty from the date of
purchase. For more information, please visit www.rapoo-eu.com.
Safety instructions
Never attempt to open the device or repair it yourself.
Do not use the device in a humid environment.
Please clean the device with a soft, dry cloth.
Problem-solving
If you need more information, please visit www.rapoo-eu.com. There you will find our FAQs. You can also download the latest drivers and quick start guides for our products there.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>