occiam T9 True Wireless Sports Earbuds User Manual
- June 13, 2024
- Occiam
Table of Contents
occiam T9 True Wireless Sports Earbuds
Product Information
The T9 True Wireless Sports Earbuds are a pair of wireless earbuds designed for sports and daily use. The package includes a charging case, two wireless earbuds, ear tips, a Type-C cable, and a user manual.
The charging case is used to store and charge the earbuds. It features a Type-C charging port for easy charging. The case also has an LED power display and charging contacts. The wireless earbuds are equipped with an earbud LED indicator light, which provides visual feedback on the status of the earbuds. The package includes three sets of ear tips, with the default size being M. The earbuds also have a built-in microphone for hands-free calling and voice assistant support.
What’s in the box?
Note: Please remove the protective films from the LED power display and charging contacts before using it.
Overview
How to Wear?
- Choose the best comfortable ear tips to wear on the earbuds
- Choose the right angle and eartips.
Caution
- Please clean the protective grille of both earbuds if the sound becomes low.
- Please clean the magnet charging contact on earbud and charging pin on the charging case with alcohol wipes if the headphones can’t be charged.
Power On/Of
Manual Power On
- When the earbuds are in the shutdown state and not in the charging case:
- Press and hold the MFB (Multi-Function Button) on the R earbud for 2 seconds to power R earbud on.
- Press and hold the MFB on the L earbud for 2 seconds to power L earbud on.
Manual Power Off
If the earbuds are not in the charging case, press and hold either earbud’s MFB for 5 seconds to power off both earbuds.
(Before the first use, please ensure that both the earbuds and the charging case are fully charged.)
-
Take out both earbuds from the charging case. Both earbuds will power on automatically and enter pairing mode.
(P.S. In pairing mode, one earbud indicator will flash red and blue alternately, while the other earbud indicator will flash blue slowly.) -
Then, search for ‘T9’ on your device and click to connect.
Note: The earbuds will reconnect to the previously paired device by priority. If you want to pair them with a second device, please disconnect the Bluetooth connection on the paired device. Additionally, if the earbuds are not connected to any devices for over 5 minutes, they will automatically power off.
Music
Voice Assistant
Phone Call
Reset
When should I reset?
- When only one side plays music.
- When you can’ t use both earbuds together.
- When both earbuds fail to pair with each other or occur connection-related issues.
How to reset T9?
Before resetting, please ensure that the charging case and both earbuds are
not in a low battery status.
- Place both earbuds in the case and leave the case open.
- Press and hold the Factory Recovery Key on the case for 5 seconds or until the LED indicator lights on both earbuds flash blue 3 times.
Initial Setup:
- Remove the protective films from the LED power display and charging contacts of the charging case.
- Ensure that the charging case and both earbuds are not in a low battery status.
Charging:
Earbuds Charging:
- When the battery level of the earbuds is low, you will hear a voice prompt saying ‘Low battery, please charge’.
- Place the earbuds inside the charging case. They will automatically enter charging mode.
- During charging, the earbuds’ LED indicator light will flash red in a breathing pattern.
- Once fully charged, the LED indicator light will turn red and then go off after 10 seconds.
Note: You can check the power level of the earbuds in the Bluetooth list or in the notification bar after connecting them to your phone.
To avoid charging failures, please clean the charging contacts of the earbuds and the charging pins of the charging case promptly
Charging Case Charging:
- Insert the Type-C charging cable into the USB Type-C charging port on the case.
- The case will automatically start charging.
The LED screen will display an incremental change of power from 0 to 100 during charging. When it reaches 100, it indicates a full charge.
How do I check the battery level of the charging case?
The LED on the case indicates the battery level when you place the earbuds
into the charging case or when the case is being charged.
How to Wear:
Follow these steps to wear the T9 True Wireless Sports Earbuds:
- Select the appropriate size of ear tips from the three included sets.
- Place the ear tips on the earbuds.
- Insert the earbuds into your ears, ensuring a secure and comfortable fit.
Resetting:
You may need to reset the T9 earbuds in the following situations:
- When only one side plays music.
- When you can’t use both earbuds together.
- When both earbuds fail to pair with each other or encounter connection-related issues.
To reset the T9 earbuds:
- Ensure that the charging case and both earbuds are not in a low battery status.
- Place both earbuds in the case and leave the case open.
- Press and hold the Factory Recovery Key on the case for 5 seconds or until the LED indicator lights on both earbuds flash blue three times.
Note: For more detailed information and instructions, refer to the T9 User Manual included in the package.
Product Parameters
- Model No. T9
- Bluetooth Version 5.0
- Supports Profile HSP/HFP/A2DP/AVRCP3
- Charging Port Type-C
- Input 5V 1A
- Battery Capacity
- Earbuds: 50mAh 3.7V, 0.185Wh
- Charging Case: 600mAh 3.7V, 2.22Wh
- Earbuds Battery Life 8h on single charge
- Charging Time
- 1h-1.5h for earbuds
- 2h for charging case
- Transmission Range 33 feet (with no obstacle)
Battery Warning
|Using the wrong battery can cause fire and other hazards (for example,in the case of some lithium battery types).
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of abattery, that can result in an explosion.
- Do not leaving a battery in an extremely high temperature surrounding environment thatcan resuilt in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Storage and Maintenance
- If the earbuds have been unused for more than 3 months, we recommend that you charge them.
- Please use chargers that are FCC(Federal Communications. Commission) approved.
- Do not disassemble Earbuds.
- Adult supervision is required for children age 6 and under.
- Do not expose the earbuds in high or low temperature, do not use the earbuds in a thunderstorm. Avoid falling or violent impact of the device. Keep the device away from fire,do not put the device in water.
- Do not use oil or any volatile liquid to clean this product.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
FCC
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment
RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Any questions, please send message to us, we’ll help you solve it as soon as possible.You can choose us with confidence. Thanks
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>