Occiam A5 TWS Earbuds Manual
- June 8, 2024
- Occiam
Table of Contents
- A5 User Manual
- True Wireless Earbuds
- Packing List
- 2200mAn Charging Case x 1
- Product Preview
- Power On/Off
- Auto Pairing
- Mono Earbud Mode
- Music Control
- Phone Calls Control
- Reject a call
- Headphone Charging
- Charging Case
- Charging case power refill
- Urgent power bank
- Safety Precautions
- Battery Warning
- FAQs
- Problems Solutions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
A5 User Manual
True Wireless Earbuds
Packing List
2200mAn Charging Case x 1
Truly Wireless Earbud x 2
Couple Eartips x 3 USB Cable X 1 User Manual X 1
Product Preview
True Wireless Earbuds, 2200mAh Charging Case, Battery Status IndicatorMultifuctional Button (MFB), LED Indicator, MicrophoneCharging Port, USB Output Port, Charging Indicator
Power On/Off
Power on
Auto power on once A5 earbuds are out of the charging box, LED indicator turns blue then red & blue flashes intensely.
Power off
Put the earphones into the charging case, then the earphones will disconnect automatically for charging, the red indicator flashes slowly
Auto Pairing
TWS Earbuds Pairing
1. Take out both earbuds one by one
2. Wait for 5 seconds to enter pairing mode
Pairing mode
3. Select A5R from the bluetooth list of phone
< Settings, Bluetooth, Now discoverable as “aPhone’”., MY DEVICES, A5R, Connected
Earbuds will auto connect the previously paired bluetooth device within pairing range
Mono Earbud Mode
1.Take out left earbud
2. Wait for 5 seconds to enter pairing modepairing mode
3. Select A5L from the bluetooth list of phone
< Settings, Bluetooth, Now discoverable as “aPhone”., MY DEVICES, A5L Connected
For right earbud, you only need to wait for about 3 seconds to enter pairing mode and select A5R from the bluetoth list
Music Control
Play / Pause
Volume +
long touch until volume up to desired pointVolume –
long touch until volume down to desired point
When the volume reaches the point you want, just stop touching.
When volume arrives at Max or Mute, there will be a prompt “du du”
Earbud volume and Android phone volume are not synchronized If earbud volume reach full blast, you can still increase volume on android phone
Next Track, double tap touchSiri/Google, double tap touch
Single left erabud can play/pause/volume-/activate Siri/Google
Single right erabud can play/pause/volume+/skip to next track
Phone Calls Control
Accept/End a call
Reject a call
long touch for 2 seconds
Volume +
long touch until volume up to desired point
Volume –
long touch until volume down to desired point
Earbud volume and Android phone volume are NOT synchronized.
Even if earbud volume reaches full blast, you can increase volume on android
phone
Earbud volume and iOS device volume are synchronized, so you can modify volume by earbud or by the iOS device.
Headphone Charging
Low Battery
Red LED indicator flashes every 10 seconds, the earbuds will turn off automatically within about 1 minute.
How to charge earbuds
put the earbuds into the charging case
red indicator flashes slowly when charging. If not, please take the earbuds out and put them back
Make sure these two points be in the correct slots until red indicators flash slowly
It takes around 1 hour to full charge the earbuds.
Red indicator of charging earbud flashes until full charge
Once full charge, blue indicator will be on for about 1 minute
Charging Case
Battery status indicator
The battery status indicator shows the remaining power in the box
blue light off
blue light on
blue light flashing
Charging case power refill
Use the USB Cable to connect the charging case port and the charger to safety
specification charger
It may take about 4 hours to fully charge the box
Urgent power bank
The output USB port can be used to charge your phone
Full power charge the box can
– refill earbuds 10-12 times
– supply 2200mAh for phone
red light flashing every 2s
red light on
blue light on
Safety Precautions
Applying the bluetooth earbuds at high volume for long will cause damage to your hearing, you are advised to adjust to proper volume to protect your hearing.
Please do not use these earbuds when you are engaged tn activities requiring to be aware of surrounding environment.
Do not apply these earphones in storm weather, they will interfere with the signal transmission, and increase the risk of being struck by lightning.
Please keep the device away from extreme heat, humidity or corrosive environments.
Battery Warning
Use DC-5V 1A chargers/adapters certified by a regulated manufacturer to
charge.
Use of an unqualified battery or charger may present a risk of accident.
Do not overcharge the battery for long which will decrease the battery service
life.
Battery usage by children should be supervised.
Dispose of batteries according to local regulations and recycle when possible.
Do not dispose as household waste.
In the event of a battery leak, do not allow the liquid to come in contact
with the skinor eyes. In the event of leak or a hazard seek medical help
immediately.
FAQs
Problems Solutions
Earbuds volume is too low even when it reaches MAX
If using an Android phone, you increase earbuds volume to MAX and still think the volume too low, please try to adjust the volume on your phone.
Earbuds cannot be charged
Wipe the charging contact point and magnet point with alcohol cloth and try to recharge earphones;
Earbuds still work in charging box
Take out the earphones and put back until the red indicator of earphones
flashes slowly;
Refill the charging case and earphones together
MEB doesn’t work
Reconnect the bluetooth as the following steps:
Step1 Forget all bluetooth device from your phone
Step2 Put both earbuds into charging case, once you see the red indicator
flashes, take them out.
Wait until you hear “pairing mode’;
Earbuds cannot connect with each other
Music cut in and out sometimes
Step 3 Active bluetooth of your phone, search A5R from bluetooth list then pair
If the above solutions cannot help, please reset to factory settings:
Step 1. Forget all bluetooth device from your phone
Step 2. Tap touch for five times the earbud with trouble until the red
indicator flashes 1 time then disappears
Step 3. Put both earbuds into the charging box, once you see the red
indicator flashes , take them out and wait 3-5 seconds, the twins earbuds will
pair with each other.
Now active your Bluetooth list to connect the earbuds
If you find all solutions don’t work, please contact us by
Email: occiam@outlook.com
Occiam A5 TWS Earbuds Manual – Optimized PDF
Occiam A5 TWS Earbuds Manual – Original PDF