KLARSTEIN 10046093, 10046094 BREEZE Box Smart Air Conditioner Instruction Manual

KLARSTEIN 10046093, 10046094 BREEZE Box Smart Air Conditioner

Specifications

• Model: BREEZE BOX SMART
• Air Conditioner Type: Portable
• Cooling Capacity: 7000 BTU/h, 9000 BTU/h
• Power Supply: 220-240 V ~50 Hz
• Power Consumption: 765 W/3.4 A, 950 W/4.1 A
• Cooling Power: 2.0 kW, 2.6 kW
• Refrigerant: R290
• Wi-Fi: 802.11 b/g/n 2.4 GHz
• Maximum Emission Power: 20 dBm

Product Usage Instructions

Installation
To install the air conditioner, follow these steps:

1. Attach the exhaust hose ensuring protection against intruders.
2. Secure the outlet hose.
3. Attach the window seal using the provided Velcro tape on three sides of the window frame, leaving the side in contact with the window frame clean and dry for proper adhesion.

Operation
Operate the air conditioner using the control panel:

• Power On/Off button
• Fan speed adjustment button
• Timer setting button
• Sleep mode button
• Mode selection button
• Temperature increase button
• Temperature decrease button
• Wi-Fi operation button

Maintenance
Regular maintenance is essential for optimal performance:

1. Clean the filters periodically to ensure efficient operation.
2. Properly store the air conditioner at the end of the season.

Troubleshooting
If you encounter issues with the air conditioner, refer to the user manual for troubleshooting steps. Common problems and solutions are provided for your convenience.

FAQ

• Q: How do I download the Klarstein app for remote control?
  A: Scan the QR code provided in the manual or download the app directly from the App Store or Google Play. Follow the app instructions for registration and setup.

• Q: What should I do if the air conditioner stops cooling effectively?
  A: Check if the filter is dirty or blocked. Ensure proper airflow by cleaning the air intake and outlet. Also, verify that the room temperature is below the set temperature.

• Q: What do error codes E1, E2, E3, and E5 indicate?
  A: Error codes E1 to E5 correspond to specific sensor failures. Refer to the user manual for detailed troubleshooting steps related to each error code.

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

SAFETY INSTRUCTIONS

Special notes

• Only use agents recommended by the manufacturer for defrosting or cleaning.
• Never store the appliance in a room in which there are permanent sources of ignition (e.g. open flames, a switched-on gas appliance or a switched-on electric heater).
• Do not puncture or burn the appliance.
• Note that coolant may be odourless.

Note : Only use the unit in rooms larger than X m² (see table):

General safety instructions

• The device is only suitable for indoor use.

• Do not use the product if it needs to be repaired or if it has not been installed properly.

• Do not use the product in the following areas:

  • near heat sources,
  • in areas where oil can splash,
  • in areas exposed to direct sunlight,
  • in areas where splash water can occur,
  • near bathtubs, in washrooms, near showers or swimming pools.

• Never insert your fingers or other objects into the ventilation openings. In particular, warn children of the dangers this may cause.

• Ensure that the unit is held vertically during transport and storage so that the compressor is correctly positioned.

• Always turn off the appliance before cleaning and unplug it from the wall outlet.

• Switch off the appliance before moving it and unplug it from the wall outlet. Move the appliance slowly and carefully.

• To avoid the risk of fire, do not cover the unit.

• All fan connections must comply with local electrical safety regulations. If necessary, refer to these regulations.

• Supervise children so that they do not play with the unit.

• If the power cord is damaged, it must be replaced by the manufacturer, customer service or a similarly qualified person to avoid danger.

• This equipment may be used by children over the age of 8 and by persons
  (including children) with limited physical, sensory or mental capabilities and/or lack of experience and knowledge, provided they have been instructed in the use of this equipment by a person responsible for their safety and understand the hazards associated with the use of this equipment. Cleaning and maintenance of the appliance may only be carried out by children under supervision.

• The appliance must be installed in accordance with national wiring regulations.

• Type and voltage of fuses: T, 250 V AC, 2 A or higher.

• Contact customer service for cleaning and maintenance.

• Do not pull the power cord, deform or modify it, or immerse it in water. Incorrect handling of the power cord may result in damage to the equipment and/or electric shock.

• National gas regulations must be observed.

• Do not block the ventilation openings.

• Do not operate the appliance solely by inserting or removing the power plug, as this may result in electric shock or fire due to heat.

• Immediately unplug the appliance from the wall outlet if it emits strange noises, odours or smoke.

Instructions for handling damage

• In case of damage to the device, contact the manufacturer, customer service or a similarly qualified person.
• If damage occurs, turn off the power, unplug the power cord, and contact the manufacturer, the service representative, or a similarly qualified person.
• The power cord must be securely earthed.
• If the power cord is damaged, turn off the power to avoid danger and unplug the power cord from the wall outlet. The power cord must be replaced by the manufacturer, customer service or a similarly qualified person.
• WARNING
  Risk of injury! Repairs to the coolant circuit may only be carried out by trained specialist personnel. Never attempt to repair the unit yourself!

NOTES ON REFRIGERANT R290

Warning

• The air conditioning system must be kept and transported upright. Otherwise, irreparable compressor damage may occur. Leave the unit for at least 24 hours before putting it into operation.
• Switch off the device and disconnect it from the power supply before cleaning.
• Make sure that the product creates a steady stream of air. Ensure the air inlets and outlets are not blocked.
• To prevent leaks, operate this unit on a horizontal surface.
• Any person performing work on a refrigerant circuit should have a current certificate from an industry-accredited assessment body. This ensures competence for the safe handling of refrigerants according to an industry-recognised assessment specification.
• If the device stops working, dispose of it properly.
• Store the device in a well-ventilated place when not in use.
• Store the device so that it is not damaged.
• Repairs may only be carried out by the manufacturer or an authorised specialist company.
• The cables connected to the device may contain potential ignition sources.
• Do not damage any components of the refrigerant circuit. Escaping refrigerant may not be noticed because it is odourless.
• Maintenance and repairs must be carried out under the supervision of specialists in the use of flammable refrigerants.

Information for rooms with refrigerant pipes

• Limit the piping to a minimum.
• Be careful not to damage the piping.
• Appliances with flammable refrigerants may only be installed in a well-ventilated room.
• Comply with national gas regulations.
• All mechanical connections must be freely accessible for maintenance purposes.

CAUTION
Risk of fire!
This device contains the flammable refrigerant R290. If the refrigerant escapes and is exposed to an external ignition source, there is a risk of fire.

DEVICE DESCRIPTION

1. Air outlet

2. Control panel

3. Air inlet

4. Exhaust air outlet

5. Air inlet

6. Water stopper/drainage point

7. Air inlet

8. Cord storage

9. Water stopper/drainage point

10. Air inlet
    Accessories

11. Exhaust hose

12. Flat type adaptor – for insertion over hose and into window spacer (or into hole in the wall/window).

13. Inward connector – connect unit with exhaust pipe

14. Drain tube for continuous drainage

15. Remote control

INSTALLATION

Installation of the exhaust pipe from wall/window.

• Feed exhaust hose through the window and slide window across so that spacer is held securely. This technique may also be used for sash windows.
• Note : Take care to maintain protection against intruders.
• Installation of the exhaust pipe from the unit

Mounting of the exhaust pipe

• Use only the hose provided and clip exhaust hose to the back of the air conditioner.
• Avoid kinks and bends in the exhaust hose as this will cause expelled moist air to build up causing the unit to overheat and shut down. Figure 7 & 8 show correct position
• The hose may be extended from 300 mm to 1500 mm but for maximum efficiency use the shortest length possible.

• WRONG
• WRONG

ATTENTION: The length of the exhaust pipe is specially designed according to the specification of this product. Do not replace or prolong it with your own private hose as this could cause the unit to malfunction!

FIXING THE WINDOW SEAL

• Fixing the seal for side-opening windows and roof windows
• The installation of the window seal is simple. You can attach the seal to a tilted window, a side-opened window or a roof window. We have chosen a side-opened window for demonstration purposes. It is particularly suitable because the exhaust hose can be attached to the side far down.
• The Velcro tape is attached to the three open sides. The side where the window is against the frame is left out. Clean and dry the window frame beforehand so that the tape adheres.

1. Attach the Velcro tape on the left, on the top and on the bottom of the window frame. We recommend that you cut the tape into strips for each window side first.
2. Now attach the Velcro tape to the inner window sides.
3. Stick the window sealing to the Velcro strips on the window frame first (starting with the top), then on the Velcro strips on the window. Push the exhaust air tube of the air conditioner through the hole, which can be adjusted in height and size.

OPERATION

Control panel

1. ON/OFF button
2. FAN SPEED button
3. TIMER button
4. SLEEP button
5. MODE selection button
6. TEMPERATURE UP button
7. TEMPERATURE DOWN button
8. WIFI mode button
   • Compressor operation indicator
   • “Water Full” indicator
   •  Low ventilation indicator
   •  Middle ventilation indicator
   •  High ventilation indicator
   •  “Timer” indicator
   •  Receiver for remote control
   • “Sleep” indicator
   • Display window
   •  “Fan” indicator
   • “Cooling” indicator
   • “Automatic” mode indicator
   • DEHUMIDIFY(DRY) indicator
   •  WiFi mode indicator

Turning ON/OFF

1. Press ON/OFF soft touch button, the unit will start automatically. If the ambient temperature is
   • higher than 22 °C, the unit will work in cooling mode.
   • higher than 20 °C, the unit will work in ventilation mode (low fan).
   • below 20 °C, the unit will work in heating function (This is for cooling & heating models only.)
2. Indicators of the functions in progress come on at the same time. The display window shows the ambient room temperature from 0 °C to 50 °C.
3. To turn the unit off, press ON/OFF button again.

Setting mode/function
Press MODE button to select required working mode: automatic, cooling, fan or dehumidify (dry). The indicator of your selected mode lights on.
Setting temperature

1.  Press ‘Temperature up’ or ‘Temperature down’ button to regulate the temperature you desired.

2. The display window will show the temperature you set as you press
   ‘Temperature up’ or ‘Temperature down’ button. Otherwise, it will always show the ambient temperature.

3. The pre-setting temperature of this machine is: 24 °C for cooling.

Setting ventilation speed

1. Press SPEED button to choose the ventilation speed you need, high, medium or low. The indicator of high, medium or low ventilation will light on at the same time.
2.  If the unit is in AUTO mode, it will choose the ventilation speed automatically according to the ambient temperature (the related indicators will light on), at this time, the SPEED and TEMPERATURE UP & DOWN buttons are invalid.

Setting timer

1. Press TIMER button to set the operating hours you desired (1 to 24 hours, the timer indicator will light on). When the set time has been reached, the machine will turn off automatically. The display window will show the hour(s) you set as you press TIMER button. If the timer button is not pressed, the unit will work continuously.
2. By pressing the timer but without turning on the other functions, you can PRE-SET the time for the machine to work. For example, if you press the timer to ‘2’, the unit will work automatically after 2 hours.

Sleep function

1. In cooling mode, by pressing the SLEEP button, the set temperature will increase 1 °C at the 1st hour, another 1 °C at the second hour, then keeps at that temperature.
2. In sleep mode, the ventilation will keep at low speed. Re-press the SLEEP button, the setting temperature and ventilation speed will return to the pre-selected one.
3. The unit will shut down automatically after the SLEEP function running for 12 hours.
4. Please note, the sleep function is not available while the machine is working in AUTO, FAN (ventilation) or DEHUMIDIFICATION mode.
5. When the machine is in Sleep function, the Fan Speed would turn to be LOW speed.

Dehumidify (DRY) mode

• In dehumidify (DRY) mode, the temperature cannot be adjusted, the ventilation will fix at low speed. When the unit is operating in Dehumidify ( DRY) mode, humidity extracted from the air is collected  in an internal tank. If the tank reaches full, the compressor and motor cut out automatically. At the same time, the
• “Water Full” indicator comes on. An alarm will also sound. When the tank is full, drain the water as shown in the page concerning “DRAINAGE”. You may also use the unit without having to empty the tank so often by using “continuous drainage”, please also refer to the page about “DRAINAGE”.
• Self-diagnosis
• This machine is equipped with self-diagnosis function. If something is wrong in the machine, the display window will show the sign: E1, E2, E3 or E5 , which reflects different condition. At this time, please call your service centre.
• Notes
  • To prolong the compressor’s life, after switch-off of the unit, please wait for 3 minutes (at least) before re-switch.
  • The cooling system will switch off if the ambient temperature is lower than the set one. The ventilation, however, keeps working on the set level. If the ambient temperature rises above the selected level, the cooling will return to work.
  • On the contrary, the heating will switch off if the ambient temperature is higher than the set one (still, the ventilation keeps working on the set level). As the ambient temperature drops below the selected level, the heating will return to work.
  • This machine is equipped with ANTI-FROST function. While using the heating function during low temperature, sometimes the heating will stop for a while in order to melt the frost. As this occurs, just wait for the heating returns to work.

All the above functions can also be performed with the supplied remote

control. This remote control requires battery CR2032 x 1pc to operate.
DEVICE CONTROL BY SMARTPHONE

If you integrate the device into your home WiFi, you can conveniently operate it via the associated Klarstein app. The app not only allows you to remotely control the device via your smartphone, but also gives you access to recipes and additional information.
Follow these steps to connect your smartphone to your Klarstein device:

1. Download the Klarstein app first by scanning the QR code with your smartphone (see below), or download it directly from App Store or Google Play.
2. Make sure your smartphone is connected to the same WiFi network that your Klarstein device is to be connected to.
3. Open the Klarstein app.
4. Sign in to your account. If you do not have an account, sign up in the Klarstein app.
5. Follow the instructions from the app.

App Download
Use the scan function of your smartphone to scan the QR code and save the app on your smartphone
Note : The app provides further information on how to use the app and help on how to connect to your device as soon as you open it for the first time.

Troubleshooting connection problems

If your Klarstein device cannot be found in the WLAN, check the following:

1. The device is not plugged in. Make sure that your device is plugged into an electric socket.

2. The device is not in pairing mode. Make sure that the WiFi indicator (LED) on the smart device control panel is blinking as described in the ‘Reset WiFi settings‘ instruction of your smart device (instructions are usually available on device connection process).

3. The WiFi access point does not operate on 2.4 GHz. Make sure that your access point operates on 2.4 GHz band and you have a separate SSID on 2.4 GHz band. If you are not sure about the operating band of your access point, please contact your internet provider company.
   Important: please note that if your WLAN router is dual band – operating on both 2.4 GHz and 5 GHz band – you need to separate the SSIDs for each band and use the 2.4 GHz SSID for connection.

4. Firewall settings of your WiFi network; the firewall setting of your WiFi network may not allow the Klarstein app to configure the WiFi settings on your smart device. Please make sure that you are not using a public WiFi network, e.g. airports, dormitories, companies, etc.

5. Different credentials used in smartphone and the app. Make sure that the WiFi credentials entered in the Klarstein app are the same as the ones that your smartphone is connected to.
   Following the above mentioned points, if your smart device still fails to connect to the app, please contact us via email for support:
   appsupport@go-bbg.com

DRAINAGE

During the process of cooling, some water will be extracted from the air into the unit.
If the reservoir is full, both of the compressor and motor will stop and the units would buzz (you can press any button to stop the buzz). The W.F. indicator will flash to show you.
To make the cooling work again, please empty the water by one of the following ways:

1. Turn off the air conditioner and avoid moving it when full.
2. Position a container (a water tray for example) underneath the drain hole.
3. Remove the drain knob & rubber plug from the drain hole and allow the water to drain out.
4. When the container is almost full, replace the rubber plug in the drain hole and empty the water tray.
5. Repeat until the unit is emptied.
6. Replace the rubber plug and tighten the drain knob firmly.
7. Switch on the unit – the full water or compressor operating indicator should not be flashing.

If you wish to operate the unit without the need to empty the water tank, please:

• Remove the drain knob and rubber plug and retain for future use.
• Connect the drain tube supplied to the water outlet as shown and locate the other end into a drain.
• The drain tube may be extended by adding an extension tube and using a suitable connector.

Please note :

1. The drain must be at or below the outlet level.
2. Flashing ‘full water’ indicator will not function in this mode of drainage.

CLEANING AND CARE

• Always unplug the air conditioner from the mains before cleaning.
• To maximize the efficiency of the air conditioner, clean regularly.

Cleaning the housing

• Use a soft, damp cloth to wipe the body clean.
• Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or other cleansing solutions. These all could possibly hurt the cabinet.

Cleaning the filter

• Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt from the filters and then rinse thoroughly under running water (no hotter than 40 °C). Dry thoroughly before replacing.
• Notice: Never operate the unit without the filters.

End of season storage

• Drain any water in the unit before completely operating the unit on ventilation only mode for a few hours, to thoroughly dry the inside.
• Clean or change the filter.
• Unplug and store the power cord.
• Replace in the original carton or cover for storage.

TROUBLESHOOTING

Is there a power failure?
Is the comp / ‘full water’ indicator flashing?
Is the room temperature below the set temperature?
The machine seems to do little.| Is there direct sunshine? (Please put down the curtain.)
Are too many windows or doors open?
Are there too many people in the room?
Is there something in the room producing lots of heat?
The machine seems to do nothing.| Is the filter dusty, contaminated?
Is the air intake or output blocked up?
Is the room temperature below your selected temperature?
Too noisy.| Is the machine positioned unevenly so as to create vibration ?
Is the floor underneath the machine uneven?
The compressor does not operate.| It is possible the overheat protection of the compressor is on. Just wait for the temperature to drop?

Error codes for the electrician

button to check, if E5 signal still exists. If that is the case, that mean the compressor system is abnormal.

TECHNICAL DATA

20 dBm

DISPOSAL CONSIDERATIONS

• If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
• This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

DECLARATION OF CONFORMITY

Manufacturer :

• Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
• Importer for Great Britain:
• Berlin Brands Group UK Limited
• PO Box 42
• 272 Kensington High Street
• London, W8 6ND
• United Kingdom
• Hereby, Chal-Tec GmbH declares that the radio equipment type Breeze Box is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: use.berlin/10046093
• For Great Britain: Hereby, Chal-Tec GmbH declares that the radio equipment type Breeze Box is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: use.berlin/10046093

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>