PROSLAT 87779 Procore PVC Slatwall User Guide

PROSLAT 87779 Procore PVC Slatwall

Product Information

Specifications

• Product: Proslat PROCORE Slatwall
• Size: 8 feet x 4 feet
• Hardware Included: Torx T25 bit, 6.4 cm Torx screws
• Package Contents: 10 x 95 5/8 inch Proslat PROCORE panels

Product Usage Instructions

Safety Information
It is crucial to install the slatwall into wall studs to ensure proper support. The wall mounting surface and structure must be strong enough to support the weight of the slatwall and its contents. Ensure that the slatwall is mounted to vertical wall studs spaced no more than 24 inches apart for optimal performance.

Pre-Installation

• Tools Required: Level, Circular saw, Marker, Jig saw
• Hardware Included: Torx T25 bit, 6.4 cm Torx screws

Installation

1. Location of Panels: Position the panels according to your layout.
2. Location of Wall Studs: Identify and mark the position of wall studs for secure installation.
3. Install Vertical J-Trims: Start by overlapping a side J-trim with the starter trim. Level the side J-trim and secure it in place.

Care & Cleaning
To maintain your Proslat PROCORE Slatwall, regularly clean it with a damp cloth and mild detergent. Avoid using abrasive cleaners that may damage the surface.

Troubleshooting
If you encounter any issues during installation or use of the slatwall, refer to the troubleshooting section in the manual or contact customer support for assistance.

Complete Warranty
For detailed information on the warranty coverage for your Proslat PROCORE Slatwall, refer to the complete warranty section in the manual.

FAQ

1. Q: What should I do if I cannot locate wall studs within 24 inches?
   A: If you cannot find wall studs within the specified distance, consult a professional installer or contractor to assess the structural integrity of your wall for alternative mounting solutions.

2. Q: Can I cut the panels to fit a custom space?
   A: Yes, you can use a circular saw or jig saw to cut the panels to fit your desired space. Ensure to follow proper cutting guidelines and use appropriate safety measures.

3. Q: How do I clean the Proslat PROCORE Slatwall?
   A: To clean the slatwall, use a damp cloth with mild detergent to wipe off any dirt or stains. Avoid harsh chemicals that may damage the surface finish.

Questions, problems, missing parts? Before returning to the store, call Proslat Customer Service — 8 a.m. – 5 p.m., EST, Monday – Friday
1-888-691-2944
info@proslat.com
www.proslat.com
Retain this manual for future use.

THANK YOU
We appreciate the trust and confidence you have placed in Proslat through the purchase of this Slatwall. Visit us online at proslat.com to see our full line of products available for your home storage needs. Thank you for choosing Proslat!

Safety Information

SLATWALL MUST BE INSTALLED INTO WALL STUDS
It is the responsibility of the installer to ensure that wall mounting surface and structure are sufficient in strength & capacity to support slatwall weight and its contents. Failure to observe these conditions may result in injury or death.

• For optimum performance, slatwall must be mounted to vertical wall studs spaced apart no more than 24 in.

WARNING: Ensure that wall mounting surface and structure are sufficient in strength & capacity to support Slatwall weight and its contents.
CAUTION: For optimum performance, PROCORE Slatwall must be mounted to vertical wall studs no larger than 24 in.

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

PACKAGE CONTENTS

• 10 x 95 5/8 in. Proslat PROCORE panels

• 1 x 95 5/8 in. Top trim

• 2 x +/- 49 in. Side J-trims

• 1 x 95 5/8 in. Starter trim

Installation

Watch our installation video on proslat.com

Location of your panels

• Decide where and how high you would like your PROCORE Slatwall section installed.
• You must start and finish on studs.

Location of your studs

• Once you have chosen your installation location, verify that you are starting and finishing on a stud.
• Using a stud finder, locate all studs between start and finish, and mark along their length with a level. You will need to screw each panel into each stud.

Install your horizontal starter trim
NOTE: For this step, it is best to have the help of a second person.

• Install you starter 95 5/8 in. trim at desired starting height (the wider side installs against the wall), level and screw into the middle studs. Do not screw into the first and last studs.

Install your vertical J-trims

• Starting on one side, overlap a side J-trim with your starter trim (the wider side installs against the wall) and screw through both (as indicated in the image).
• Level the side J-trim and drive one screw at the top to hold it in place.
• Repeat on the other side. Your panels will be screwed through the J-trims holding both in place.

Install first panel

• To install the first panel, fit the panel into the top of the tracks made by the vertical J-trims and slide all the way to the bottom.
• Make sure your panel is seated into bottom starter trim and is level. Screw through the upper channel of the panel and into each stud. Drive screws at either end of the panel through the vertical J-trim and into your stud. This will hold your vertical J trims to the wall.

NOTE: Do not drive screw through the hook channel.

Installation of the following 8 panels

• Repeat Step 6 for all remaining panels. Push down on each panel before screwing to make sure that it is properly overlapped with the lower adjacent panel.
• Make sure you screw into every stud before installing the next panel.

• Repeat until your last piece is left, verifying level every three panels.
• Properly interlocked panels will conceal previous panel’s installation screws.

NOTE: Screws installed at the top of the vertical J-trims may have to be removed to complete a clean installation of the top panel.

Install last panel

• Set your last panel in place but do not screw. Mark where to cut trims.

• Install the last panel and screw in.

NOTE: Screws installed at the top of the vertical J-trims may have to be removed to complete a clean installation of the top panel.

Install your top trim

• Install your horizontal top L-trim by simply clipping it into the lip in front of the screw cavity.

NOTE: If you have done a complete wall and you had to cut your top panel to fit, you will need to use silicone to install your top trim.

• Vertical J-Trims not included in image to show clear installation of horizontal top L-trim.

Care and Cleaning

• Proslat PROCORE panels are very durable and water resistant. They can be washed with a power washer on low setting or wiped with a soft cloth and mild detergents. Do not use sharp objects or abrasive cleaners.

Troubleshooting

Concrete or block wall installation
If your walls are made of concrete or blocks, you will need to fasten 2 x 3 in. studs or furring strips vertically at 16 in. or 24 in. using cement screws and then install your panels to the studs. You will need 1.5 in self tap-in screws to screw through the aluminum insert inside the panel. If you have any issues finding them in your local hardware store please contact us.

More than one section high installation

• If you are installing more than one section vertically, it is not necessary to use a starter trim at the start of the second section.

Side by side installation

• If you are installing two or more sections side by side, use 2 J-trims (placing them back to back) to connect sections.

• Optional: H-trim is also available on proslat.com — use this in place of back to back J-trims for best results.

H-trim installation (Used to join 2 sections together)

Typically sold separately

• After deciding where you want to install your slatwall, center your H-trim in the center of the stud at the correct height, and secure the H-trim to the stud by placing a screw at the top of the trim. Make sure the H-trim is straight and add a second screw midway down the H-trim to secure it in place. (This screw can be removed once you have completed the following step.).

Side by side installation using an H-trim

• Overlap one of your bottom starter trims with the bottom of your H-trim and screw through both. (number 1 on the illustration)
• Level and screw into the adjacent two studs. (number 2 on the illustration)
• Take one of your side J-trims and install vertically by overlapping with the bottom starter trim and screw through both. (number 3 on the illustration)
• Level the side J-trim and drive a tempory screw at the top. (This screw will be removed at the end to allow you to cut the excess trim)
• Repeat on the other side of your H-trim.

Warranty – Proslat PROCORE Slatwall

This document details the Solutions Murales Proslat inc. Warranty for all new Proslat PROCORE Slatwall purchased anywhere in North America. This Lifetime Warranty extends only to the first retail purchaser of the PROCORE Slatwall.
Lifetime Warranty. Solutions Murales Proslat inc. (hereafter Proslat) warrants its PROCORE slatwall against defects in material or workmanship for a lifetime period. Proslat will replace any defective panel as long as it was installed and maintained according to the printed instructions and local building codes. Any Proslat PROCORE Slatwall replaced under the terms of the Lifetime Warranty inherits the remaining warranty period from the original purchase.
Exclusions. The Proslat PROCORE Warranty does not cover the following:

• Damage that results from improper installation or misuse or abuse;
• Damage due to acts of God, fire, or accident;
• Damage created by non-Proslat accessories such as hooks, baskets, cabinets and shelving;
• Damage that results from loading accessories beyond the stated maximum weight capacity of the slatwall panels [225 lb. (102 kg) per square foot];
• The cost of labor or accessory materials; and shipping cost to return defective products.

Limitations of Warranty. The above Lifetime Warranty is the exclusive warranty for Proslat PROCORE Slatwall. Proslat disclaims all other warranties, express or implied, including any implied warranties or merchantability, fitness for particular purpose or otherwise. If you live in an area where consumer law prohibits this disclaimer, the above Lifetime Warranty will not extend the time period of any such implied warranty. Obtaining Lifetime Warranty Service. For warranty service, call 1.888.691.2944. You will need your original proof of purchase and photos to illustrate the claimed defect.

Disclaimer of liability
Solutions Murales Proslat inc. and its successors, distributors and dealers (hereafter SELLER) shall in no way be responsible for the product’s proper use and service. THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS. The BUYER acknowledges that he/she is not relying on the SELLER’s skill or judgment to select or furnish goods suitable for any particular purpose and that there are no liabilities which extend beyond the description on the face hereof and the BUYER hereby waives all remedies or liabilities, expressed or implied, arising by law or otherwise, (including without any obligations of the SELLER with respect to merchantability and consequential damages) or whether or not occasioned by the SELLER’s negligence. The SELLER disclaims any warranty and expressly disclaims any liability for personal injury or damages. The BUYER acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and the BUYER agrees to indemnify the SELLER and to hold the SELLER harmless from any claim related to the item of the equipment purchased. Under no circumstances will the SELLER be liable for any damages or expenses by reason of use or sale of any such equipment. The SELLER assumes no liability regarding the improper installation or misapplication of its products. It is the installer’s responsibility to check for proper installation and if in doubt, contact the manufacturer. These assembly guidelines will direct you through the process of assembling a section of Solutions Murales Proslat Inc product. Please keep in mind that they may not cover every assembly or installation scenario you may encounter. Since each installation is unique in its performance requirements, the ultimate installation method used is the sole responsibility of the installer. Proslat Inc. disclaims any liability or responsibility for the improper installation of this product. The purchaser is solely responsible for compliance with applicable local codes. Solutions Murales Proslat inc. recommends that all designs be reviewed by a licensed architect, engineer or local building official before installation.
PROSLAT.COM
Please contact 1 888 691-2944 for further assistance.
Questions, problems, missing parts? Before returning to the store, call Proslat Customer Service — 8 a.m. – 5 p.m., EST, Monday – Friday
1-888-691-2944
info@proslat.com
www.proslat.com
Retain this manual for future use.

References

• Lifts, Cabinets, Racks & Flooring - Custom Storage | Proslat Garage
• Lifts, Cabinets, Racks & Flooring - Custom Storage | Proslat Garage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>