GERMAN POOL GIC-GD28T Table Top Induction Cooker User Manual

GERMAN POOL GIC-GD28T Table Top Induction Cooker

Product Structure

Body

(Structure Diagram For Reference Only)

Control Panel

Operating Instructions

1. Connect power plug. Switch on the main power switch located at the back of the unit. A “beep” sound is heard, indicating that cooker is in “Sleeping” mode.

2. Place cookware in the centre of cooking hob. Press “ ON/OFF ” key and the induction cooker enters stand-by mode. The Power indicator turns red and digital display shows “ ”.

3. Power Setting: Press the “Power/Temperature/ Timer” button until Power indicator lights up. The digital display shows “1,600 W”. Press “+” or “-” button to adjust the power level. A total of 8 power levels can be adjusted, from 400 W to 2,000 W.
   Note:
   Users can choose to adjust either the “Power” or the “Temperature”.

4. Temperature Setting: Press the “Power/Temperature/ Timer” button until Temperature indicator lights up. The digital display shows “160°C”. Press “+” or “-” button to adjust the temperature. A total of 8 temperature levels can be adjusted, from 60°C to 240°C.

5. Time Setting: Press the “Power/Temperature/ Timer” button until Timer indicator lights up. The digital display shows “00:30”. Press “+” button to set the minutes, and press “-” button to set the hours.
   The highest adjustable time is 3 hours. Press “Timer” button again to confirm the setting. If the timer is set to “00:00”, the digital display will flash and the setting will be cancelled after 10 sec.

6. Lock Setting: Press “Lock/Unlock” button to lock all settings at “Heating” mode or “Timer” mode. Under “Lock” status, induction cooker would not respond to any key press. Press this key for 3 seconds to unlock “Lock” status.

7. After cooking, press “Power On/Off” button to switch back to “Sleeping” mode.

Cookware

Please use only German Pool authorized cookware or cookware recommended by us. Any unauthorized cookware may affect induction cooker’s heating capacity and quality.

Appropriate Cookware

• Material:
  Metal, ferromagnetic stainless steel or cast iron

• Shape:
  Flat bottom with a diameter of 12 cm or more. Cookware bottom diameter should not exceed 26 cm and must not weight over 6 kg (with food)

Ferromagnetic Stainless Steel Water Pot

Metal Frying Pan

Ferromagnetic Stainless Steel Cooking Pot

Metal Saucepan

Ferromagnetic Metal Water Pot

Cast Iron Grilling Pan

Inappropriate Cookware

• Material:
  Non-metallic, non-ferromagnetic, ceramic, glass, aluminum or brass

• Shape:
  Bottom not flat or too bumpy, or bottom diameter smaller than 12 cm

Aluminum Water Pot

Glass Pot

Ceramic Pot

Pot With Non-Flat/ Curved Bottom

Pot With Bumpers

Pot Bottom Too Small

Safety Cautions

Warning

• Do not share power jack with other appliances.
• Do not apply water directly onto induction cooker.
• Do not insert any wire or metal objects through air inlet or venting outlet of the induction cooker.
• Please avoid collision between cook-top panel and cookware.
• A distance of at least 10 cm between the wall and the sides of induction cooker must be reserved for venting purposes.
• Do not place or use induction cooker near any heat source.
• Do not heat up any metal plate or other magnetic objects on the cook-top.
• Do not heat empty cookware for an extended time. Overheating of cookware will cause damages and injuries.
• Do not heat up unopened cans on the cook-top. It may cause explosion.
• Unplug the power cord when induction cooker is not in use.

Care & Maintenance

• Before cleaning, switch off the main power and then disconnect the power plug.
• Any stain or deposit on the cook-top surface must be cleaned off immediately before reusing.
• Cleaning must be done when cook-top surface has completely cooled down.
• To clean the cook-top, wipe with a dry cloth. If stain remains, clean with a moist sponge soaked with mild soap, and then wipe again with a moist cloth.
• To clean the body of induction cooker, wipe with a soft moist cloth. If stain remains, clean with a moist sponge soaked with mild soap, and then wipe with a moist cloth.
• Do not immerse induction cooker into water.
• Do not clean cook-top with any rough cloth or abrasive tool.
• Do not use organic solvents or any cleaning products that contain chemicals such as Benzene.

Note

Over time, cook-top panel may be discoloured due to one of the following situations. Operation of induction cooker would not be affected as this is normal.

• Overheating or burning empty cookware
• Spillage not cleaned immediately
• Cookware not clean
• Long period of usage

Troubleshooting

When you run into any problem operating this product, use the table below to troubleshoot the problem.
If the problem persists, contact our Repairs & Customer Service Centre.

| |
---|---|---
Power is connected and Main On/Off switch is turned on, but the induction cooker does not respond when the On/Off button is pressed.|

• Is there a power shortage in your area?
• Is there a short circuit in the power source of your home?
• Is the power plug too loose or not connected well?

|

• Try again after power supply resumes.
• Find out the cause of short circuit and eliminate it before switching on the cooker again.
• Re-connect the plug or replace the power jack.

Buzzer beeps continuously and pan is not heated.|

• Is the pan not suitable for induction cooking?
• Is the pan positioned properly?

|

• Use an appropriate pan.
• Position the pan in the centre of cook-top.

Induction cooker stops heating during normal operations.|

• Is the pan empty or cooking temperature too high?
• Are the air inlet and outlet being blocked?
• Is the surrounding temperature too high?

|

• Avoid operating cooker with an empty pan. Let cooker cool down before switching it on again.
• Remove obstruction from the vent. Let induction cooker cool down and try again.
• Try again after the room cools down.

Temperature fluctuates.|

• Is pan bottom not flat?

|

• Replace pan with a flat-bottomed one.

• Above table enlists the most common problems regarding the operations of the product and their possible causes as well as suggested solutions.
  It is strictly for users’ reference only.

• Should there be any product malfunction or breakdown, DO NOT repair it yourself. Contact our Repairs & Customer Service Centre or consult a licensed technician immediately.

top sensor
E2| Internal overheat| E6| Open or short circuit of internal temperature sensor
E3*| Voltage over-loaded| E7| Cook top overheat

• E3 & E4 are not product errors. Operation can be resumed when power voltage returns to normal rating (145V – 275V)

Technical Specifications

(W) 703 mm

(D)  402 mm

Net Weight| 約 Approx. 7.0 kg
Gross Weight| 約 Approx. 8.0 kg
Power Adjustment Range| 2,800 W

If there is any inconsistency or ambiguity between the English version and the Chinese version of these operating instructions, the Chinese version shall prevail.

Product appearance, structure and specifications are subject to change without prior notice.

Refer to www.germanpool.com for the most up-to- date version of the operating instructions.

Warranty Terms & Conditions

Under normal operations, the product will gurantee a 1-year full warranty provided by German Pool (effective from the date of purchase).

• This warranty is not valid until customer registration information is received by our Service Centre within 10 days of purchase via one of the following means:

  1. Visit our website and register online: www.germanpool.com/warranty
  2. Complete all the fields on the attached Warranty Card and mail it back to our Customer Service Centre.
     

Please fill out the form below. This information and the original purchase invoice will be required for any repairs. Warranty will be invalidated if information provided is found to be inaccurate.

1. Customer who fails to present original purchase invoice will be disqualified for free warranty.

2. Customer should always follow the operating instructions. This warranty does not apply to:
   – labour costs for on-site installation, check-up, repair, replacement of parts and other transportation costs;
   – damages caused by accidents of any kind (including transport and others);
   – plastic parts and accessories;
   – operating failures resulted from incorrect voltage, improper operations and unauthorized installations or repairs.

3. This warranty is invalid if:
   – purchase invoice is modified by unauthorized party;
   – product is used for any commercial or industrial applications;
   – product is repaired or modified by unauthorized personnel, or unauthorized parts are installed;
   – serial number is modified, damaged or removed from the product.

4. German Pool will, in its discretion, repair or replace any defective part.

5. This warranty will be void if there is any transfer of ownership from the original purchaser.

This warranty is valid only in Hong Kong and Macau

Customer Support

Hong Kong, China
Room 113. Newport Centre Phase II. 116 Ma Tau
Kok Road. Tokwawan. Kowloon. Hong Kong.
Tel: +852 2773 2888
Fax: +852 2765 8215
www.germanpool.com

References

• 德國寶German Pool | 家庭電器、廚櫃、傢俬 | 香港十大名牌

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>