ActronAir UNO Outdoor Board Seven Segment Display Menu User Guide

: July 17, 2024
: ActronAir

Table of Contents

ActronAir UNO Outdoor Board Seven Segment Display Menu
LEGEND AND DESCRIPTIONS
DEFAULT SCREEN
SHORT CUT TO DEFAULT SCREEN
MENU TABLE
DEFAULT MENU TABLE
SYSTEM STATUS TABLE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Specifications

Product Name: UNO Outdoor Board Series
Models: UNO, UNOPRO, UNOJR
Revision: 5 240523

Product Usage Instructions
Legend and Descriptions

DISPLAY: Scroll through the items at the same menu level.

Menu Table
Uno Board

Main Menu
Sub-Menu Level 1
Sub-Menu Level 2
Display Menu:
- Unit is starting up
- Unit Off
- Cooling Mode
- Heating Mode
- Oil Return
- Overheat Protection

Frequently Asked Questions (FAQ)
Q: How do I access the default screen?
A: Simply power up the outdoor board, and after the initial flash, wait for the system status, menu status, or error code to be displayed.

Seven Segments Menu Navigation Guide – UNO Outdoor Boards Series

UNO Outdoor Board Series refers to UNO/UNOPRO/UNOJR

Copyright © 2019 Actron Engineering Pty Limited ABN 34 002767240. ®Registered Trade Marks of Actron Engineering Pty Limited.
All rights reserve. This manual is a controlled document which contains conﬁdential and proprietary information. No part or contents of this book maybe reproduced or transmitted in any form or by any means without the written permission of Actron Engineering Pty. Ltd.
ActronAir is constantly seeking ways to improve the design of its products. Therefore, speciﬁcations are subject to change without notice.

LEGEND AND DESCRIPTIONS

NOTE: This document is applicable to both Residential and Commercial Unit. Shaded box in MENU tree is only applicable to UNO Board conﬁgured for Variable Capacity Commercial Models.

DEFAULT SCREEN

When the outdoor board is powered up, the seven segment display will flash the word “ ” for 20 seconds. The system status, menu status or error code will then be displayed. From here on, you can access the menu.

SHORT CUT TO DEFAULT SCREEN

Hold the BACK Key “ BACK ” for 3 secs. to return to Default Screen.
(Display will first show “—-” on the seven segment for 1 second then it will show the Default screen

NOTE:
After pressing either of the MENU Key “ MENU ”, ENTER Key “ ENTER ”, or BACK Key “ BACK ” and the system is left idle for 10 minutes then Seven Segment Display will revert back to Default Screen.

MENU TABLE

Uno Board
Uno Board – Display & Service Menu

First two digits will be flashing. Select the Family by pressing Menu first then press Enter to accept. Then the last two digits will be flashing.Select the Capacity by pressing Menu then press Enter to accept.
Feature is not available at this stage.

Uno Pro Board
Uno Pro Board – Display & Service Menu

See page 16 for additional details.
Only for Advance 2/PRV15AT/PRV17AT and Aires Models
Machine not running. If machine is running, refer to the Emerson EV3 drive documentation.
Only for VCC CRV/PKV720T – CRV/PKV960T Models

Only for Advance 2/PRV15AT/PRV17AT and Aires Models

Only for VCC CRV/PKV720T – CRV/PKV960T Models. Last two digits will be flashing. Select the Family by pressing Menu first then press Enter to accept. Then will display with the last three digits flashing. Select the Capacity by pressing Menu then press Enter to accept.
Only for Advance 2/PRV15AT/PRV17AT and Aires Models. First two digits will be flashing. Select the Family by pressing Menu first then press Enter to accept. Then the last two digits will be flashing. Select the Capacity by pressing Menu then press Enter to accept.
Circuit numbers depends on Family.
Last digit will be flashing. Select the Control Source by pressing Menu first then press Enter to accept.
Table No will be available in the Advance (R-32 Series) operation detail document.
Only for Advance 2/PRV15AT/PRV17AT and Aires Models.
Only for VCC CRV/PKV720T – CRV/PKV960T Models
Only for Advance 2/PRV15AT/PRV17AT and Aires Models