goe Electric Car Energy Meter Controller User Guide
- June 10, 2024
- goe
Table of Contents
goe Electric Car Energy Meter Controller
Product Information
The go-e Controller is a device that allows you to control the charging of your electric vehicle. It is available in different languages and comes with a quick reference guide, installation scheme, and safety regulations. The device can be installed with additional sensors to monitor the energy consumption of your home.
Product Usage Instructions
- Before installation and use, read and follow all safety regulations and instructions provided in the quick reference guide.
- Download the complete operating instructions and data sheet from www.go-e.com and read all documents carefully for future reference.
- Install the go-e Controller according to the installation scheme provided. The task may only be carried out by a qualified electrician.
- If you want to monitor the energy consumption of your home, install additional sensors according to the instructions provided.
- Once installed, use the go-e Controller to control the charging of your electric vehicle.
Symbole & Download
Discover the go-e YouTube Channel
Here you can find HOW-TO videos and product videos. Our videos are available
with subtitles in different languages!
Important symbols
- Warning of a hazardous situation with serious consequences if the safety regulations are not followed.
- The task may only be carried out by a qualified electrician.
- For more information, read the full installation and operating guide
Note before installation/download
Observe all safety regulations (from page 16) and instructions in this quick reference guide! Download the complete operating instructions and data sheet: www.go-e.com. Read all documents carefully and keep them for future reference.
Product overview
- a. Inlets for current measurement Sensors 1-3
- b. Modbus RS485 x2
- for later extensions
- c. Inlets for current measurement Sensors 4-6
- d. 4 keys for menu navigation
- e. Brightness sensor Display switches off automatically
- f. Color display (320 x 240 px)
- g. Power supply with connecting clamp
- h. WiFi antenna connector 2.4 GHz
- i. Ethernet 100 Mbit/s
- j. Type plate with serial number of the Controller
Scope of delivery
- go-e Controller
- Connecting clamp
- 6 Current transformers foldable, 100 A with jack plug
- WiFi antenna, self-adhesive optionally connectable
- Ethernet flat cable 2 m optionally connectable
- Data card
Installation scheme
Installation
PV optimization is also possible without
direct measurement of production by the inverter. With AC inverters, the self-
generation can be measured and visualised via a sensor
Installtion (additional sensors)
Download go-e Charger App
Safety regulations/notes
General safety regulations
- The go-e Controller is to be used exclusively to collect measured values in an electrical system and to pass them on in a network in order to implement energy monitoring, to maximize the self-consumption of a PV system or to implement dynamic load management in interaction with go-e Chargers.
- Failure to comply with the safety regulations can have serious consequences. go-e GmbH disclaims any liability for damage caused by disregarding the operating instructions, safety regulations or warnings on the device.
- Mains voltage – danger to life! Never use the go-e Controller if the housing is damaged or open.
- If unusual heat is generated, do not touch the go-e Controller and disconnect the power supply. In case of discoloration or distortion of the plastic, contact customer support.
- Wearers of electronic implants should keep at least 60 cm away from the go-e Controller due to electromagnetic fields.
- The go-e Controller has the communication interface WiFi 802.11b/g/n 2.4GHz. The WiFi is operated on a frequency of 2.4Ghz, channels 1-13 with the frequency band 2412-2472Mhz. The maximum transmit power of the WLAN is 20dBm EIRP.
Electrical protective measures, installation, and operation:
- All information on electrical installation is intended exclusively for a qualified electrician whose training allows all electrical work to be carried out in accordance with the applicable national regulations.
- The go-e Controller must be mounted by a qualified electrician in accordance with the complete operating instructions. The installation must be carried out in accordance with local, regional and national regulations.
- An electric shock can be fatal. Disconnect the circuit from the power supply before making any electrical connections.
- The Controller is mounted on a top-hat rail. Observe the permissible ambient conditions. At ambient temperatures of more than 45 °C, a safety distance of 10 mm to other devices in the control cabinet is recommended. An ambient temperature of 55 °C must not be exceeded.
- The Controller should not be operated in the immediate vicinity of flammable or explosive substances, running water or heat-emitting equipment.
- Make sure that the power connection leading to the go-e Controller is properly installed and undamaged.
- An RCD type A, 30 mA must be provided on the building side, unless local regulations deviate from this. Independently of this, a line circuit breaker (recommendation: LS-3/ B6) must be provided. Do not fuse the go-e Controller with more than 16 A.
- The current transformers should be attached in the direction of the current as described and illustrated in the installation instructions. This means that the arrows on the current transformers should point in the direction of the current consumer.
- The go-e Controller may only be operated on fully functional protective devices. Connection cables must be sufficiently dimensioned. We recommend a cable cross-section of at least 1.5 mm².
- Always use the current transformers supplied. Alternative current transformers, which are also suitable for higher currents, may be used only after inquiry to go-e support and its confirmation in text form.
Opening, repair, maintenance
- Any modification or repair to the hardware or software of the go-e Controller may only be carried out by a qualified specialist of go-e GmbH.
- Before dismantling an allegedly defective product, contact go-e’s technical customer support in any case and wait for their decision on the further procedure for handling the service case.
- Removing and damaging warning notices attached to the go-e Controller or opening the device will result in the loss of any liability by go-e GmbH. The manufacturer’s guarantee also expires in the event of any modification or opening of a go-e Controller.
- Do not cut the current transformer cables.
- The go-e Controller is maintenance-free.
- The device can be cleaned with a damp cloth. Do not use any cleaning agents or solvents.
Disposal
According to guideline 2012/19/EU (WEEE Directive), electrical equipment must not be disposed of with household waste after the end of use. Take the device to a collection point specially set up for waste electrical equipment in accordance with national legal requirements. Also dispose of the product packaging properly in the waste paper collection so that it can be recycled.
Legal notice
The copyright to these operating instructions is held by go-e GmbH.
All texts and illustrations correspond to the technical status at the time of
preparation of the manual. go-e GmbH reserves the right to make unannounced
changes. The contents of the operating instructions do not justify any claims
against the manufacturer. Pictures are for illustration purposes and may
differ from the actual product.
You can find all the terms and conditions of the guarantee and warranty at
www.go-e.com.
CE Declaration of Conformity
Hereby go-e GmbH declares that the radio equipment type go-e Controller is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.go-e.com
go-e GmbH Satellitenstraße 1 9560 Feldkirchen AUSTRIA
office@go-e.com
+43 4276 6240010
www.go-e.com
Online support
www.go-e.com
References
- Smart Walboxes to Charge Your EV | go-e
- Smarte Wallbox für Elektroautos: mobil & stationär | go-e
- Smart Walboxes to Charge Your EV | go-e
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>