LawMate PV-WT20W 1080p DVR Smartwatch User Guide

LawMate PV-WT20W 1080p DVR Smartwatch

Product Information

Specifications

• Built-in Image Sensor
• Sensor Resolution
• Sensor Sensitivity
• Lens F/No.
• Focal Length
• Angle of View
• Algorithm
• File Format
• Video Recording Mode
• Recording Capability
• Frame Rate
• Wi-Fi
• Wi-Fi Protocol
• Memory Type
• Data Interface
• Date/Time Table Snapshot
• LCD Size
• LCD Frame Date/Time Table
• Power Input
• Power Consumption
• Charging Time
• Battery Input
• Battery Lifetime
• Recording time Vibration Alert

Product Usage Instructions

Charge the Battery

• Plug the micro USB end of the cable into the device and connect the other end to a USB power source or power bank.
• The green LED will indicate charging and turn off when fully charged.

LED Indicators

• Open the cover to the USB port to view the LED indicators.
• The colors and patterns signify different device statuses such as device on, recording, Wi-Fi connection, and more.

Format Memory Card

• To format the memory card, long press the Wi-Fi button until the red LED blinks, then release.
• The device will automatically turn off after formatting. Alternatively, you can format it via the PV CAM VIEWER app.

Frequently Asked Questions

Q: How can I reset the device?

A: Press the reset button when the device disconnects abnormally.

Q: Can I change the video format?

A: Yes, when the LCD is active, press the touch button to access the format setting page and make your selection.

Names and Parts – DVR

1. Power On / Off Switch
2. USB Port
3. LED Indicators
4. Default Button
5. Wi-Fi On / Off Button
6. Reset Button
7. Lens
8. Microphone
9. LCD Screen
10. Touch Button

• The warranty will be void if the serial number sticker is tampered with.
• No microphones are available for the USA market.

Package Content

Charge the Battery

• Plug the micro USB end of the cable to 2 and connect the other end to a USB power source ( as shown above), or plug it into a power bank of your own choice.
• A green LED will be solid while charging. After fully charged, a green LED will go off.

LED Indicators

• Open the cover of the USB port, there will be 2 LED indicators on the left and 2 on the right.

LED Indicators can be turned off via APP.

Format Memory Card

•  When the device is powered on, long press the Wi-Fi button 5 until the red LED blinks and then releases.
• After 12 seconds, the format is done and the device will automatically turn off.
• You can also connect the device to your smartphone and format it via the app PV CAM VIEWER.

Operation

Power On / Off

• Switch 1 upward to turn on, and downward to power off.

Recording

• 10 seconds after the device is on, it will start to record automatically.

Wi-Fi

• With the device powered on, press 5 once to turn it on, and Press it again to turn it off.
• For more information about Wi-Fi connection setup, please refer to the Wi-Fi quick guide.

Reset

• When the device functions abnormally, press 6 once.

Default

• Restore Wi-Fi password and SSID
• Long press 4 for more than 4 seconds but less than 10 seconds and release.

Restore factory settings

• Long press 4 for more than 10 seconds and then release.

Touch Button

Show the time

• Touch the button once and the screen will light up, showing the time and date. It will go off after 15 seconds if nothing is done.
• If the device is recording, it will show the battery status with an R-word in the up-left corner.
• If the built-in memory card is full, it will show an F word in the up-right corner.
• Please note that it will not show the battery status if the device is not recording.
• Please note the time is the same as the DVR. If you need to synchronize the time, please connect your phone to the DVR and synchronize via the app.

Change time format

• When the LCD is lighted up, touch the touch button will jump to the time format setting page.
• Touch the button to choose.

Change the language

• Long touch the button again and it will jump to the language setting page.
• Touch the button to choose.

Date and Time Setting

• Please refer to the Synchronize the Time steps on the PV Cam Viewer for Wi-Fi Cam guide.
• The time and date shown on the screen will be the same as the DVR.

Download Files

• When the device is off, plug the micro USB end of the cable into the USB port and connect the other end to the PC.
• After connecting to the PC, power on the device

Specification

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>