legrand DLPlus Mini-Trunking Installation Guide

legrand DLPlus Mini-Trunking

Specifications:

DLPlus Mini-Trunking white color

Number(s):
0 300 04/07/08/10/14/15/17/20/21/22/26/27/33, 0 301 10/12/14/91/93, 0 302 07/08/09/11/13/14/16/18/21/23/24/26/27/28/41/43/51/53/54/71/73/74/81/83/86/88/90/91/92/93, 0 303 00/01/02/03/16/26, 0 306 54/67/77, 0 308 01/02/04/05, 0 312 00 to 0 312 09/11/13/14, 0 333 15/16/17/25/26/27/28/29/30/55/57 0 336 00 to 09, 6 489 05/06

Product Information

1. Usage:
   DLPlus mini-trunking offers:

   • The distribution, protection, and derivation of various cables in an electrical installation.
   • Mini-trunkings with finishing accessories for easy installation.
   • Compliance with norm EN 50085-2-1 for safety and technical performance.
   • Flexibility with installation and maintenance.

2. Range:
   Available in various sections with or without partition:

   • Sections: 20×10, 32×10, 20×12.5, 32×12.5, etc.

   • Length: 2.10m

   • Mini-Trunkings with or without Partition:
     Assembly of the body and covers by clips. Available in white color RAL 9003.

   • Finishing Accessories:
     Internal and external angles for cable holding and easy conductor positioning.

   1. End Cap:
      Specific angles for certain mini-trunking references. Enables blocking the end of the body, improving aesthetics, and fitting on mini-trunkings with or without partition.

   2. Internal/External Angle:
      Enables cable holding in the trunking without additional staples, easy conductor positioning, and quick cover and finishing accessories fitting.

FAQ:

• Q: How do I fix the mini-trunking to the wall?
  A: You can fix the mini-trunking by joining with adhesive neoprene, using wall plugs for immediate fixing, or by screws and nails.

• Q: What is the cable-grip feature on DLPlus mini-trunking?
  A: DLPlus mini-trunking with or without partition includes an integrated device along the body length for holding cables in place.

Overview

USE

DLPlus mini-trunking offers:

• the distribution, the protection, and the derivation of various cables in an electrical installation.
• mini-trunkings, finishing accessories (end, joint of lid, joint of body, interior angle, exterior angle, flat angle, derivation)
• all the easy ways/advantages for the installation.
• to comply with the norm EN 50085-2-1, safety, and technical performance.
• flexibility with the installation and maintenance.

RANGE

20×10

| with| 0 308 01
without| 0 308 02
32×10| with| 0 308 05

20×12,5

| with| 0 300 07

without

| 0 300 08
6 489 05 *

32×12,5

| with| 0 300 14
without| 0 300 15
40×12,5| with| 0 300 20
16×16| without| 0 300 04
25×16| without| 0 300 10

32×16

| ****

without

| 0 308 04
6 489 06 *

40×16

| with| 0 300 21
without| 0 300 22
60×16| with| 0 300 26
32×20| without| 0 300 17
40×20| without| 0 300 27
60×20| with| 0 301 14
75×20| with| 0 300 33
32×25| without| 0 301 12
40×25| without| 0 301 10

• with adhesive

Mini-trunkings with or without partition
Assembly of the body and covers by clips (disassembling with the assistance tool ex: screwdriver)

Available in length of 2m.
White color RAL 9003

Fixing by:

• joining (cartridge of adhesive neoprene for glue gun ref. 30949)
• wall plugs for immediate fixing (without screw nor nail ref. 0 308 98/99)
• screw, nails…

Mini-trunkings without partition

Mini-trunkings with partition

Cable-grip:
DLPlus mini-trunking with or without partition is equipped on all the body lengths, with an integrated device for holding cables in place. White flexible PVC

Enables:

• cable holding in the trunking (no staple to add)
• easy conductors position
• quick cover and finishing accessories fitting

Finishing accessories

End cap

Enables:

• to block the end of the body
• respect of the protection degree
• improvement of aesthetics (covering of the cut)
• left or right-end cap

1. Assembly on the body by fitment and screwing.
2. Fitting on mini-trunking with or without partition.

White color RAL 9003

Internal/external angle

Enables to join 2 pieces of mini-trunkings of the same cross-section, an internal or external angle:

• avoid the cut of miter on the mini-trunking
• respect for the degree of protection
• aesthetics improves (covering of the cut and not or little extra thickness)
• Assembly on the body by clip-on.
• Variable internal/external angles of 60 with 120°.
• White color RAL 9003

Note: specific angles for 60×20 and 75×20 mini-trunkings.
Indeed, for mini-trunkings nr. 0 301 14 and 0 300 33, the internal angles nr 0 302 91/0 303 01 and the external angles nr 0 302 92 and 0 303 02 have different shapes from the other references enabling the screwing in the partitions.

• 0 302 91 internal angle for 60×20 mini-trunking
• 0 303 01 internal angle for 75×20 mini-trunking
• 0 302 92 external angle for 60×20 mini-trunking
• 0 303 02 external angle for 75×20 mini-trunking

Assembly in internal angle:

• for 60°
• for 90°
• for 120°

Assembly in external angle:

• for 60°
• for 90°
• for 120°

Flat angle

Enables the junction in the flat angle of 2 pieces of mini-trunkings of same cross-sections:

• avoid the cut of miter on the trunking
• respect for the degree of protection
• the distribution of the various currents preserves
• aesthetics (covering of the cut) improves
• Assembly on the body by clip-on after fitting the plate between 2 pieces of mini-trunkings edge to edge.
• Flat angles are variable (85° to 95°)
• White color RAL 9003

Note:
specific angles for 60×20 and 75×20 mini-trunkings.

Indeed, for mini-trunkings nr. 0 301 14 and 0 300 33, the flat angles nr 0 302 93/0 303 03 have different shapes from the other references enabling the screwing in the partitions.

• 0 302 93 internal angles for 60×20 mini-trunking
• 0 303 03 internal angle for 75×20 mini-trunking

Numbers| Flat angles

for mini-trunkings

---|---
0 302 13| 20×10
–| 32×10
0 302 23| 20×12,5
0 302 53| 32×12,5
0 333 16| 40×12,5
0 301 93| 16×16
0 302 43| 25×16
0 333 27| 32×16
0 333 28| 40×16
0 302 73| 32×20
0 302 83| 40×20
0 302 93| 60×16/20
0 303 03| 75×20
0 333 57| 32×25
0 302 88| 40×25

Cover joint

Enables the junction end to end of two covers:

• respect of the degree of protection
• to improve aesthetics (covering of the cut)

To put the cover joint on DLPlus, you can clip it on one cover (with 3 plastic parts under the cover joint for example with ref 0 336 09) after you can slide the others.

White color RAL 9003

Junctions accessories

Flat T junction

Enables the junction in “T” of 2 pieces of the same cross-section of mini trunking:

• respect for the degree of protection
• aesthetics (covering of the cut) improves
• Assembly on the body by clip-on

White color RAL 9003

Wall and ceiling tap-off

Preserves the separation of different types of current (mains, TV…)

• respect for the degree of protection
• aesthetics (covering of the cut) improves
• Assembly on the body by clip-on and on the wall by screwing

White color RAL 9003

Tree cases of wall and ceiling installation

1. Te junction
2. Angle junction
3. Ceiling junction

Linking piece nr 0 306 67

Length of 3m.
White color RAL 9003

• Linking piece between the above unit and the ring trunking
• Adhesive foam mounting: foam base equipped with a self-adhesive

Fixing by:

• joining (cartridge of adhesive neoprene for glue gun ref. 0 309 49)
• wall plugs for immediate fixing (without screw nor nail ref. 0 308 98/99)
• screw, nails…

It makes the installation easier and faster by containing all the wires (4 conductors) inside the body before the cover is clipped. Assembly of the body and covers by clips (disassembling with the assistance tool ex: screwdriver).

Dimensions

Plug-in ceiling rose nr 0 30654

Lighting connection
Assembly on the ceiling by screwing

• respect for the degree of protection
• to improve aesthetics (covering of the cut)

White color RAL 9003

Delivered with:

Hole cutter diameter 100mm
Height 40mm

Junction with linkings piece and mini-trunking:

• mini-trunking 20×10 DLPlus
• mini-trunking 20×12.5 DLPlus
• linking piece 32×8 ref. 0 306 67
• Maximum suspended weight: 25 Kg as long as the unit is equipped with a suitable fixing device.
• Greater accessibility of wiring/decentring of the connection point.

Hole saw hole diameter 102mm, bottom feed.

Junction box nr 0 303 16/26

Enables the junction on 4 directions

• Fixing grid inside the box, accepts Ø 3 mini and Ø maxi screws.
• Frame pre-cut in height (visible) to match mini-trunkings heights.
• Pre-cut frame width (hidden inside) to match mini-trunkings widths.

Respect of the degree protection
White color RAL 9003

Dimensions:

Other accessories

Spacer nr 0 306 77

Color RAL 8014

• Available in length of 2.10m
• Enables the use of mini-trunking as skirting (compliance with standard)
• Assembly with mini-trunking by adhesive
• May be used with all mini-trunkings references.

Wiring accessories frames

1. Use with Mosaic socket outlet
2. Frame dimensions (2 modules): 127 x 74 x 60 m
3. Frame dimensions (4 modules): 172 x 74 x 60 mm
4. Frame dimensions (6 modules): 217 x 74 x 60 mm
5. Frame dimensions (2×4 modules): 162 x 167 x 60 mm
6. Frame dimensions (2×4 modules): 228 x 74 x 60 mm

TECHNICAL CHARACTERISTICS

Wiring capacity:

• Conductors types: HO7V-K (norm NFC 32-201)

Compartments number| Dimensions| Compartiment n°| Cross-section (mm²)| Maxi diameter (mm)
---|---|---|---|---

1

| 20×12,5|

1

| 160| 10
32×12,5| 285| 2 x 10
32×16| 360| 13
40×16| 400| 14
32×20| 450| 17
40×20| 580| 17
2| 20×12,5| 1| 70| 6,5
---|---|---|---|---
2| 70| 6,5
32×12,5| 1| 120| 10
2| 120| 10
40×12,5| 1| 150| 10
2| 150| 10
40×16| 1| 190| 14
2| 190| 14
3| 60×20| 1| 200| 12,5
---|---|---|---|---
2| 200| 12,5
3| 320| 17
75×20| 1| 290| 17
2| 290| 17
3| 445| 2 x 12

Classification for DLPlus mini-trunking EN 50085-2-1:

characteristic
6.6 Electrical insulating characteristic| With electrical insulating characteristic
6.7 Degrees of protection provided by enclosure| IP40
6.9 The system access cover retention| With a tool
6.101 The position when surface-mounted| Wall fixed Ceiling fixed
6.102 The functions provided| Type 1
Rated voltage| 500 V
Protection against mechanical shocks| IK 07

Compositions and functions of DLPlus mini-trunking systems EN 50085-2-1:

MATERIAL CHARACTERISTICS

• DLPlus mini-trunkings are in PVC white color RAL 9003
• Spacer in PVC brown color RAL 8014
• Linking piece white color RAL 9003
• Finishing accessories (internal/external angle, flat angle, end cap, junctions, cover joint) are in ABS, PVC ou PP white color.
• The accessories are compatible with glycerophtalic or acrylic paint.

Contact Information

• 128, av. du Maréchal-de-Lattre-de-Tassigny – 87045 LIMOGES Cedex
• Tel: 0 (+33) 5 55 06 87 87
• Fax: 0 (+33) 5 55 06 88 88
• www.legrand.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>