imperii High Definition Car Video Recorder Instructions Manual

: June 7, 2024
: imperii electronics

Table of Contents

Paclcanging Acceuories
Product Overview
Menu Function Settings
Operating Instructions
Technical Parameters
Read User Manual Online (PDF format)
Download This Manual (PDF format)

imperii High Definition Car Video Recorder Instructions Manual

Paclcanging Acceuories

User’s Manual
Car charger
USB Cable
Silicone band

Product Overview

imperii High Definition Car Video Recorder

OK/confirmation
Up key
Down key
Mode selection kry/MODE
Menu key
Power supply key
TF card slot
USB data interface
REST
Horn
Lens
Back clip fixation hook

After power on, press Menu Key to enter settings interface. Select the settings item using Up/Down key; press OK Key to enter next level menu and select specific function item, and then press OK Key to confirm. After confirmation, press Menu Key to exit. When enters system menu settings interface, press Menu Key Twice continuously.

Video mode sub-menu

files

3| Motion

direction

| On/Off| Video in motion detection On and

Off

7| Loop

recording

| Off/1 Min/3 Min. (default)/5 Min.| A single video file segment length of

time

loudspeaker

Chinese/ Japanese/French/German/Korean

/1talian/Portuguese/Russian/Spani5hArabic

| Display the selected language
3| Auto Power Off| Off/1 min/3 minJ5 min.| Set automatic shutdown time when

No operation

4| Screen saver| 1 min/3minJ5mlnJOff| Set automatic the screen saver time

Or off screensaver.

5| System Reset| Cancel/Execute| Restore default settings
6| Light

frequency

Note: When DVR turns off that the last settings will be saved.

Operating Instructions

DVR has the function of video recording, photographing, preview, screen saver and network camera, select the function by oneself according to needs during use, please insertTF card before use.

Record Mode
After pressing Power Switch Key or connecting to the charger, DVR automatically enters Record Mode and starts recording, at this time, blue indicator light is flickering. During video recording, press OK Key to stop video recording, at this time, blue indicator light is always on.
When the charger is working, ifpov,,er supply of charger is disconnected, DVR shuts of automatically after delaying 5 seconds.
Under turn on mode, long press the OK key to turn on or off the screen saver function.
Camera Mode
After power on, press Mode Key and select to enter camera mode, press OK Keyto take a photo.
review Mode
After power on, press Mode Key and select to enter Preview Mode, press Up/Down Key to select the video files or photo files, press OK Keyto play or pause, press Mode Key to exit Preview Mode.
Motion Detection Function
Set up Motion Detection” item of video mode menu as “On”, start up motion detection function. When
moving object is detected, the system will record the video for one minute and save the video clip. If the
object is still moving after one minute, the system will record for another one minute and save the video clip. It will stop recording and enter the detection mode again till the object stops moving.
When exits the motion detection, it automatically turns off the motion detection function.
This file will not be overwritten and deleted in the loop when recording.
Screen Saver
In the system settings menu item, set automatic the screen saver time or off screen saver.
Charging
It can change after DVR is connected to charger, red indicator light is always on during charging, after fully charged, red indicator light is off.
Connect the computer
1. U disk function: Confirmation that the options ofin the system menu is the disk drive, use
USB cable connect the computer and there will appear a movable disk and the device enter in the
U disk mode. Under U disk mode, you can copy or cut the recorded files into computer for playing,
and you canalsotakeouttheTFcardand read the data in card with card reader.
2. PC Camera function: Confirmation that the options ofin the system menu is the PC Camera, Use USB cable to connect computer, and there will appear standard video device in the screen of the computer, meanwhile, which can be used for PC Camera.
Date and Time Settings
Select “Date Settings” in the system menu interface, press OK Keyto enter date and time settings interface.
In the date and time settings interface, press OK Keyto select year, month, day, hour and minute, use Up/Down Keyto adjust the year, month, day, hour and minute, after all the settings are done, press OK Key to confirm exit.
System Reset
If abnormal condition occurs to the device during use, use a small stick of diameter 1 mm to press the Reset key, the system will reset automatically.

Technical Parameters

Sensor: CMOS sensor
Image resolution: 720P: 1280×720 / 1080P: 1920×1080 /VGA: 640×480
Visual angle: wide-angle
LCD: 2.6/2.8/3.0/3.6/4.0/4.2/4.3″TFr HD Display Screen
Video Format: AVI 30fps
Photo format: JPEG
Memory card: TF card 1GB-32GB
USB interface: USB2.0
Operating System: Windows2000/me/xp/2003;Vista;macos;linux
TV output: NTSC/PAL
Battery capacity: 250mAH
Charging time: About 2 hours
Storage consumption: VGA—about 45MB/minute 720P—about 105MB/minute
Operating Temperature: -10(0 -60(0
Storage Temperature: -20<>C- 70″C
Weight: 277g/600g
Dimension: 300x74x12mm

Imperii Logo

imperii High Definition Car Video Recorder Instructions Manual – Download [optimized]
imperii High Definition Car Video Recorder Instructions Manual – Download
imperii High Definition Car Video Recorder Instructions Manual – OCR PDF