Orbegozo CP 136105 Ceiling Fan Instruction Manual
- July 15, 2024
- Orbegozo
Table of Contents
Orbegozo CP 136105 Ceiling Fan
Specifications:
- Model: CP 136105
- Components: Roof support, Canopy, Support bar, Coupling cover, Motor, Lamp panel, LED Panel, Difusser, Remote + Controller, Installation bag
- Minimum Height Requirement: 230 cm from the floor to the blades
- Weight Capacity: Minimum 50 Kg
Product Usage Instructions
General Safety Instructions:
This appliance is suitable for use by children aged 8 years and above and individuals with reduced physical capabilities if supervised. Avoid misuse to prevent possible injury.
Cleaning and Maintenance:
Ensure proper disconnection from the mains supply before cleaning or performing maintenance. Keep rotating blades at least 2.30 m from the floor when hung.
Facility:
- Before installation, disconnect power by removing fuse or turning off the circuit breaker.
- Hang the fan with at least 230 cm clearance from the floor to the blades and 76 cm from any wall or obstacle.
- Ensure all connections are secure after installation to prevent the fan from falling.
- Turn off and stop the fan before reversing its direction.
Operating Instructions:
To operate the ceiling fan:
- Turn off the fan before using the remote or controller.
- Use the remote or controller to turn on/off the fan and control the light.
FAQ
- Q: Where can I find a copy of the manual?
- A: You can find a copy of the manual at www.orbegozo.com.
- Q: What is the minimum height requirement for hanging the fan?
- A: The fan should be hung with at least 230 cm of clearance from the floor to the blades.
Read this manual carefully before running this appliance and save it for reference in order to obtain the best results and ensure safe use.
Scan this QR code in order to access to more information about this ceiling
fan, including installation details. Or enter
www.orbegozo.com and look for the model number in
the website.
SAFETY INSTRUCTIONS
Dear Customer, If you follow the recommendations contained in this Instruction Manual, our appliance will give you constant high performance and will remain efficient for many years to come. Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.
General Safety Instructions
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must never play withthe appliance. Cleaning and user maintenance must never be carried out by children without supervision.
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the appliance and the cable cord out of the reach of children less than 8 years old.
- WARNING: In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
- If the supply cord is damaged it must be repaired by the Authorized Service Agent.
- Never pull on the cord when unplugging.
- Do not use the unit with a damaged cord or plug, or if it is not working properly.
- Do not handle the appliance with wet hands.
- Never immerse the appliance in water or any other liquid.
- Make sure the appliance has been unplugged before cleaning.
- This appliance must be installed following the national regulations for electrical installations.
- This appliance is for household use only.
- In case that you need a copy of the instruction manual, you can find it in www.orbegozo.com.
- WARNING: In case of misuse, there is a risk of possible injury.
Other specific safeguards
- The method of disconnection from the mains supply must incorporate a switch or isolator with a minimum contact separation of 3 mm.on all poles.
- Make sure that when the fan is fitted in the chosen position, there is no possibility of the rotating blades coming into contact with any object. Blades should be at least 2.30 m from floor when fan is hung.
- If you are installing more than one ceiling fan make sure that you do not mix fan blade sets, even though they are from the same ceiling fan model.
- Before beginning, disconnect power by removing fuse or turning off circuit breaker.
- Once fan installation is completed make sure that all connections are secure to prevent fan from falling.
- Fan must be turned off and stopped before reversing fan direction.
- Check that the means of fitting the fan to the ceiling is capable of supporting the weight of the fan when in operation. (Minimum 50Kg.).
FAN COMPONENTS
FAN INSTALLATION
WARNING
The fan should be hung with at least 230 cm of clearance from the floor to the blades and 76 cm from any wall or obstacle.
ROOF TYPES
This fan can be mounted on a normal or slightly inclined ceiling. You can
increase the suspension length with the longer support bar.
FAN INSTALLATION
- Position the roof support with the two screws and plugs (depending on the type of roof)
- Pass the support bar through the hole in the docking cover
- Loosen the motor joint bolts and attach the bar with cover to the motor using the flanged pin and bolts
ATTENTION: It is very important to ensure that the flanged pin is correctly installed and secured. Poor fixing of the pin can result in the fall of the fan
HOW TO HANG THE FAN
Carefully lift the fan and place the tilt support bar on the suspension bracket attached to the ceiling. Make sure the slot in the ball is properly aligned with the tab on the support bar.
WARNING
The fan must be hung with at least 230 cm of free space from the ground to the blades.
REMOTE CONTROL CONNECTION
To make the electrical connection you must ensure that the corresponding
thermal in the home’s automatic panel has been lowered; do not make any
connection if you are not sure of the absence of electric current.
ASSEMBLY OF THE BOWL
Once all electrical connections have been made, lift the cup onto the ceiling support, aligning the previously loosened screws with the holes in the cup. Turn the cup to lock. Secure all screws with a screwdriver
LAMP INSTALLATION
Remove the screws from the motor plate and carefully feed the wires through
the hole in the lamp panel. Align the holes on the lamp panel with the holes
on the motor connection plate, see the picture. Then screw the three screws
firmly.
Connect the LED panel by matching the two cables on the panel with those on the motor body, respecting the color of each cable. Next, attach the LED panel using the magnets.
DIFFUSER PLACEMENT
Insert the diffuser into the lamp panel, bend it a little to be able to insert
it more easily. You don’t need to hold it, once inserted it will fall into
place under its own weight.
FAN BALANCING
Keep in mind that all ceiling fans are not created equal, even on the same model! Some may move more or less than others. Movement of a couple of centimeters is quite acceptable and does not imply that the fan will fall over. Although all blades are weighted and grouped by weight, it is impossible to completely eliminate wobble. This should not be considered a problem. Ceiling fans tend to move during operation because they are generally not rigidly mounted.
BALANCING KIT
A balancing kit has been supplied to help reduce wobble. Keep the kit as it may come in handy if the fan wobbles in the future. The kit includes instructions on how to use it.
OPERATING THE FAN
In order to turn on the fun press one of the speeds, 1/2/3/4/5/6, being 1 the lowest and 6 the highest one. You can change the speed anytime by pressing the desired level
- Turn off the ceiling fan
- Turn on or off the light
- Change the light mode. Neutral, White, Warm
- This button changes the direction of rotation of the blades. In winter, select the upward rotation, as they will direct warm air trapped near the fan downward throughout the room.
When it’s hot, select the down spin and the blades will create a breeze that will spread throughout the room.
- Press 1H: the fan and light will turn off automatically after 1 hour.
- Pulse 2H: the fan and light will turn off automatically after 2 hours.
- Pulse 4H: the fan and light will turn off automatically after 4 hours.
- Pulse 8H: the fan and light will turn off automatically after 8 hours.
MAINTENANCE AND CLEANING
- Change the battery by opening the battery compartment cover on the remote control, put in 2 AAA batteries and make sure the battery polarity matches the compartment diagram (Note: Battery is not included). Replace the compartment cover.
- Always make sure that the battery compartment has been properly closed.
- Do not expose the remote control to direct sunlight
- Do not try to recharge exhausted batteries. There are special rechargeable batteries, in which case it is clearly specified.
- Do not throw batteries into fire; there is a risk of explosion.
- Clean the fan with a soft, dry cloth. Never use scourers, abrasives or chemical cleaners. Avoid condensation coming into contact with electrical components.
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed-out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliances.
DECLARATION OF CONFORMITY:
This device complies with the requirements of the Low Voltage Directive 2014/35/EU and the requirements of the EMC directive 2014/30/EU.
GUARANTEE
This appliance is covered and is entitled to the legal guarantee in accordance with the legislation in force from the date of purchase. Keep the purchase receipt to be able to claim your right to the guarantee. To find the closest service to your location, contact through the following web link: https://orbegozo.com/asistencia-tecnica/ For any type of query, doubt or incident, you can contact us through our email shown on the main page of this manual or through our technical assistance service at https://orbegozo.com/contacto/ Orbegozo is not responsible for components and accessories that are subject to wear and tear due to use, as well as perishable compounds or those that have deteriorated due to improper use. Nor will it be held responsible if the owner has technically modified the device. Check the legal conditions on our website.
Specification
References
- Orbegozo Electrodomésticos | Todo para tu hogar y cocina
- Asistencia técnica - Orbegozo Electrodomésticos
- Asistencia técnica - Orbegozo Electrodomésticos
- Contacto - Orbegozo Electrodomésticos
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>