ufesa 3D40 Air Circulator Fan Instruction Manual

ufesa 3D40 Air Circulator Fan

Specifications:

• Power Consumption : 39.4 W
• Airflow : 12.75 m3/min
• Efficiency : 0.324 (W/(m3/min))
• Noise Level : 57.5 dB(A)
• Speed : 4.11 m/s

Product Usage Instructions

Description:
The SF Gdansk / 3D40 is a circulating air fan with the following components:

1. Front grille
2. Control panel
3. Blades
4. Connecting rods
5. Base
6. Display screen with Timer and Temperature indicators

Display Screen:

1. Timer
2. Temperature

Control Button:

1. Timer button
2. Oscillation button
3. On/Off button
4. Speed button

REMOTE CONTROL

1. Power Button
2. Timer button
3. Speed button
4. Mode button
5. Horizontal oscillation button
6. Vertical oscillation button

Safety Instructions:
Read the instructions carefully before use and keep them for future reference. B&B TRENDS, S.L. will not be liable for any harm due to failure to follow warnings.

Remote Control Battery Installation:

1. Unlock the battery cover using a thin object.
2. Insert a CR2025 battery into the remote control.
3. Lock the battery cover in place.

Installation:
Follow these steps for installation:

1. Check the fan’s condition and assemble the connecting rods as shown in the pictures provided.
2. Securely attach the connecting seat of the fan head with the long rod.

Operation:
To operate the fan:

1. Plug the fan into a standard socket to activate it in standby mode.
2. Use the POWER button to switch between low, medium, and high fan speeds.
3. Adjust speed using the SPEED button or the remote control.

WE WOULD LIKE TO THANK YOU FOR CHOOSING UFESA. WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

WARNING
PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT. STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE.

SAFETY INSTRUCTIONS

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• It is necessary to disconnect the appliance before assembling, disassembling and cleaning.
• This appliance is designed for use at a maximum altitude up to 2000m above sea level.

IMPORTANT INFORMATION

• This appliance is intended exclusively for domestic use for the ventilation of rooms. Do not use it for other purposes. Any other use should be considered improper and dangerous.
• The manufacturer shall not be held responsible for any damage resulting from improper, incorrect and irresponsible use and/or for repairs made by unqualified technicians.
• Do not insert your fingers or any other objects through the fan’s protector grille.
• The appliance must be kept out of the reach of children.
• Do not use the appliance if it is not working properly, or if it appears to be damaged. If in doubt, take it to a professional, qualified technician.
• Do not move the appliance while it is operating.
• When the appliance is not being used, remove the plug from the mains socket. Do not touch the appliance with wet hands or feet.
• Do not drag the appliance by the cable to move it.
• Do not pull the cable or the appliance itself to remove the plug from the mains socket.
• To clean the appliance, follow the instructions in the manual in the section dedicated to cleaning and maintenance.
• B&B TRENDS, S.L. will not be held liable for any harm or damage which may occur to people, animals or objects as a result of failure to observe the aforementioned warnings.

REMOTE CONTROL BATTERY INSTALLATION

1. With the help of a semicircular thin object, turn the battery cover to the unlocked position as in the below picture:
2. Take out the battery cover.
3. Put the battery (CR2025) into the remote control and place the battery cover on the battery compartment making sure that the arrowhead icon on the battery cover is aligned with the unlock icon on the remote control. Then, with the help of a semi-circular thin object, turn the battery cover clockwise to the locked icon.

INSTALLATION

Install the fan in the following sequence as in the picture.

1. After unpacking, check whether the body is in good condition and whether there is any defect.
   • First, remove the screw at the bottom of the short connecting rod, insert the short rod into the chassis and fix it together with the screw (Picture 1).
   • Connect the connecting seat of the fan head with the long rod, fix the long rod together with the short rod (Picture 2)

Notice : When assembling and disassembling, please screw the connecting rod instead of pulling the machine head.

OPERATION

Plug the fan into the standard domestic socket to put the product in standby.

• POWER button:
  Push POWER button to switch the fan into operation at low level speed (F1). Push it again to select standby mode.

• SPEED button:
  Push SPEED button to select MIDDLE (F2), HIGH (F3) or LOW (F1) fan speed. With each push on SPEED button, the related symbol will flicker 3 times. Then the display will show the room temperature. You can also push this button on the remote control.

• OSCILLATION button:
  Push the “OSC” button to oscillate the fan horizontally, and the related symbol “_” will light up. Push it again to change the horizontal oscillation to vertical oscillation function, the related symbol “I I” will light up. Push it again to oscillate the fan up, down, left, and right simultaneously and the related symbol “[ ]”will light up. Push it again to stop the oscillation function and the related symbol will turn off. Push on the remote control to set the oscillation function.

• TIMER button:
  Push the “TIMER” button to select between 00-15 hours, and the related value will flicker 3 times. And then the room temperature will be displayed.

• Mode button (on the remote control only):
  Push the MODE button to select Natural mode (H1), Sleeping mode (H2) or Normal mode (F1) and the related symbol will light up or turn off (only for remote control adjustment).

  • Natural Mode : To imitate the effect of natural wind, the fan changes the speed between low-middle-high with a specific pattern.
  • Sleeping mode: In this mode the speed of the fan is decreased until it reaches the lowest speed.

Note : If no operation is performed within 180 seconds, the display screen will automatically turn off. Press any button to wake it up.

CLEANING AND MAINTENANCE

Warning : before carrying out regular cleaning operations, disconnect the plug from the mains socket.

• To clean the appliance, use a soft, slightly damp cloth. Do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or any other liquid. If this accidentally happens, under no circumstances should hands be put into the liquid. Immediately disconnect the plug from the mains socket. Then dry the appliance carefully and check that all the electrical parts are dry. If in doubt, check with professional qualified technician.
• It is essential that the air inlet and air outlet holes are free of dust and fibres.
• In case of long periods of non-use, store the fan, protecting it from dust and moisture.

We recommend using the original packaging.

PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on Waste Electrical and Electronic Equipment, known as WEEE, which establishes the legal framework applicable in the European Union for the disposal and recycling of electrical and electronic appliances. Do not throw this product into the bin. Take it to the nearest electrical and electronic waste treatment plant. The product may contain batteries. Remove them before disposing of the product and dispose in special containers approved for this purpose. We hope you are satisfied with this product. The product may contain batteries. Remove them before disposing of the product and dispose in special containers approved for this purpose.

B&B TRENDS, S.L. · C.I.F. B-86880473 C. Cataluña, 24 P.I. Ca N’Oller 08130 Santa Perpètua de Mogoda (Barcelona) · España

www.bbtrends.es

FAQ

Q: How do I clean and maintain the fan?
A: Refer to the maintenance and cleaning instructions provided in the user manual. Ensure the fan is unplugged before cleaning.

Q: Can I use the fan without the remote control?
A: Yes, you can operate the fan using the control panel on the unit itself if you don’t have the remote control handy.

References

• B&B Trends
• Servico técnico Ufesa – Servico técnico Oficial de marca Ufesa

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>