GIGABYTE RTX3060 Ti Gaming Graphics Cards User Guide
- October 27, 2023
- Gigabyte
Table of Contents
GIGABYTE RTX3060 Ti Gaming Graphics Cards User Guide
Hardware Installation
- Make sure the computer is off and power cable unplugged.
- Remove the chassis cover and locate the PCI Express x16 or AGP slot, if necessary,remove the bracket(s) from the back of the chassis.
- Insert the card into the slot until it is firmly in place, if necessary, plug in the external power cord.
- Screw in the bracket of the card to the chassis and close the chassis cover.
- Connect the appropriate cable(HDMI , DVI , D-sub, Display Port) to the card and the display.
- Reconnect the power cable.
Software Installation
Please download the driver and utilities at http://download.gigabyte.us/FileLisUUtility/VGA.zip
- For more information about GIGABYTE products, please visit GIGABYTE website: https://www.gigabyte.com
Notice
Please do not remove any labels on this graphics card. Doing so may void the
warranty of this card
Due to rapid change in technology, some of the specificat ions might be out of
date before publication of this this manual.The author assumes no
responsibility for any errors or omissions that may appear in this document
nor does the author make a commitment to update the information contained
herein.
Ravi Product Notice:
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.Use of this copyright protection technology must be authorized by Ravi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Ravi Corporation. Reverse engineering or disassembly is prohibited
Trademarks
Third-party brands and names are the
properties of their respective owners.
Copyright
© 2013 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. [-GBT””]. No part of this manual
may be reproduced or transmitted in any form without the expressed, written
permission of GBT.