KOHLER Levity Plus K-702426-L 61-9/16 Inch Sliding Bath Door Owner’s Manual
- July 12, 2024
- Kohler
Table of Contents
KOHLER Levity Plus K-702426-L 61-9/16 Inch Sliding Bath Door
FAQ
- Q: How do I clean the glass doors?
- A: Use a mild detergent and a soft cloth to clean the glass doors. Avoid abrasive cleaners to prevent scratches.
- Q: Can the height of the bath door be adjusted?
- A: The bath door provides out-of-plumb adjustability during installation for customization.
- Q: What is the warranty on this product?
- A: Refer to the manufacturer’s website for detailed warranty information.
Features
- Frameless design emphasizes glass and creates a sleek, minimalist look
- Innovative roller design with stainless steel bearings simplifies installation and provides out-of-plumb adjustability while glass is installed
- Interior and exterior towel bars provide integrated storage on the doors
- Cushioned center guide provides smooth, quiet sliding action
- CleanCoat®+ glass coating creates a hydrophobic barrier that repels water, soap scum, and residue, saving time and protecting shower doors 10 times longer than original CleanCoat. (Based on 2021 internal wear/abrasion testing using a microfiber cloth.)
- Smooth, easy-to-clean wall jambs
- Tempered glass ensures enhanced safety and durability
Material
- Frameless, 3/8″ (10 mm) thick Crystal Clear tempered glass
- Anodized aluminum prevents rust and corrosion
Installation
- Fits opening widths 56-5/8″ – 59-5/8″ (1438 –1514 mm)
- 61-9/16″ (1564 mm) high, with 55-9/16″ (1411 mm) minimum head clearance
- 3″ (76.2 mm) width adjustment
- Out-of-plumb adjustability simplifies installation
- For residential use only
- Not for use in hospitality
Codes/Standards
- ANSI Z97.1
- CAN/CGSB-12.1
- CPSC 16CFR 1201
Limited Warranty
- KOHLER® Bath and Shower Doors Ten-Year Limited Warranty
- See website for detailed warranty information.
More Information
Available Colors/Finishes
Color tiles intended for reference only.
Available Glass Options
- Code Description
- L Crystal Clear
Dimensions
Technical Information
All product dimensions are nominal.
- Base-To-Wall Radius – Max: 1/2″ (13 mm)
- Shower Ledge Min Flat: 3″ (76 mm)
- Shower Wall Min Flat: 3-1/2″ (89 mm)
Notes
- Install this product according to the installation instructions.
- The vertical opening should be a minimum of 64-1/2″ (1639 mm) to allow for installation clearance.
Contact
- 1-800-4KOHLER (1-800-456-4537)
- Kohler Co. reserves the right to make revisions without notice to product specifications.
- For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada
- 6-12-2024 20:10 – US
References
Read User Manual Online (PDF format)
Loading......