SPIN MASTER ElToroLoco Diecast Monster Truck Instruction Manual
- July 12, 2024
- SPIN MASTER
Table of Contents
- SPIN MASTER ElToroLoco Diecast Monster Truck
- Product Information
- Product Usage Instructions
- CONTENTS
- HOW TO INSTALL BATTERIES
- DIRECTIONAL CONTROL
- ADDING WATER
- TROUBLESHOOTING
- Safety Precautions
- CARE AND MAINTENANCE
- BATTERY SAFETY INFORMATION
- PRODUCT BATTERY REMOVAL INSTRUCTIONS
- FCC STATEMENT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SPIN MASTER ElToroLoco Diecast Monster Truck
Product Information
Specifications
- Brand: Spin Master
- Model Number: T66801_0017_20150571_GML_IS_R2
- Power Source: AAA batteries (LR03) 1.5V x 4
Product Usage Instructions
Installing Batteries
- Open the battery door using a screwdriver.
- Remove any used batteries.
- Install new batteries following the polarity diagram inside the battery compartment.
- Securely replace the battery door.
Charging the Product
- Turn off the vehicle.
- Remove the cover from the charging cable compartment.
- Plug the charging cable into a 5V DC computer outlet.
- Pulsing LED indicates charging; solid light indicates fully charged.
Driving Instructions
- Turn on the vehicle on a flat surface
- Push the throttle lever to the maximum position and back to minimum to connect.
- Use the remote control to drive the vehicle.
Troubleshooting Tips
If there are interruptions in normal functioning, reset the product by
turning it off and on. If issues persist, try moving it to a different
location. Low batteries can also cause disruptions in performance.
Care and Maintenance
Remove batteries if the toy is not in use for an extended period. Wipe
gently with a damp cloth. Avoid direct heat and do not submerge in water to
prevent damage to electronic components.
Note to Adults
Regularly inspect for damage. Do not use the toy with the charger if any
parts are damaged. This toy is not suitable for children under 3 years old and
should only be used with the recommended charger.
Frequently Asked Questions (FAQ)
-
Q: What should I do if the product stops working suddenly?
A: Try resetting the product by turning it off and on. If issues persist, check for low batteries or move it to a different location to rule out electromagnetic interference. -
Q: How should I clean the toy?
A: Wipe the toy gently with a clean damp cloth. Do not submergeit in water as it may damage the electronic components. -
Q: Can children under 3 years old play with this toy?
A: No, this toy is not suitable for children under 3 years old. Always supervise children during playtime.
WITH SMOKE EFFECTS
INDOOR / OUTDOOR
CAUTION:
HAIR ENTANGLEMENT — Tie back and cover hair and secure loose clothing prior to
play
Spin Master Ltd. reserves the right to discontinue the MONSTERJAMRC.COM website at any time
WARNING: CHOKING HAZARD – Small parts. Not suitable for children under three years
CAUTION: Hair Entanglement. Tie back and cover hair and secure loose clothing prior to play
Spin Master logo & © 2024 Spin Master Ltd. All rights reserved.
© 2024 Feld Motor Sports, Inc. MONSTER JAM™, UNITED STATES HOT ROD
ASSOCIATION™, USHRA™ , EL TORO LOCO® are trademarks of and used under license
by FMS. All rights reserved.
MADE IN CHINA
Do not change or modify anything on the toy
Keep away from obstacles and electrical hazards.
This toy is only to be connected to equipment bearing either of the following
symbols:
Retain this information, addresses and phone numbers for future reference
CONTENTS
HOW TO INSTALL BATTERIES
HOW TO CHARGE
HOW TO DRIVE
HOW TO FIX DRIFTING
DIRECTIONAL CONTROL
ADDING WATER
TROUBLESHOOTING
HOW TO INSTALL BATTERIES
- Open the battery door with a screwdriver (A). If used batteries are present, remove these batteries from the unit by pulling up on one end of each battery. DO NOT remove or install batteries using sharp or metal tools.
- Install new batteries as shown in the polarity diagram (+/-) inside the battery compartment.
- Replace battery door
securely. Check your local laws and regulations for correct recycling and/or battery disposal.
HOW TO CHARGE
- Turn the vehicle off.
- Remove the cover from the charging cable compartment.
- Plug the charging cable into a 5V DC computer outlet.
- Pulsing ON/OFF LED indicates battery is charging, solid ON for fully charged.
HOW TO DRIVE
- Turn on the vehicle and place on a flat surface.
- Push the throttle lever up to the maximum position (A) and back to minimum position (B) to complete the connection.
- You are ready to drive.
- Use the remote control to drive.
ADDING WATER
-
Fill the WATER DROPPER with clean, cold water.
-
Remove the cover over the water reservoir. 3. Use the WATER DROPPER to add water to the reservoir.
Note : Be careful to not overflow the reservoir or drip water on the rest of the vehicle as water can damage the electronics. -
Once the reservoir is full, recover the water reservoir securely. Please use only non-distilled water for the best performance. Never use HOT water. Do not use any liquid other than water. Other liquids may damage the smoke generator. Completely drain and dry unit before storag
NOTE: If normal function of the product is disturbed or interrupted, strong electromagnetic interference may be causing the issue. To reset product, turn it completely off, then turn it back on. If normal operation does not resume, move the product to another location and try again. To ensure normal performance, change the batteries, as low batteries may not allow full function.
Safety Precautions
- Keep hands, hair and loose clothing away from the motor/ wheels when power switch is turned ON.
- Remove batteries when not in use.
- Parental guidance is recommended for the play.
- Keep your toy in your sight so that you can supervise it all the time.
- New alkaline batteries are recommended to obtain maximum performance.
- Users should keep strict accordance with the instruction manual while operating the product.
Note: Parental guidance is recommended when installing or replacing batteries. Under the environment with electrostatic discharge, the toy may malfunction and require user to reset the toy.
CARE AND MAINTENANCE
Always remove batteries from the toy when it is not being used for a long period of time. Wipe the toy gently with a clean damp cloth. Keep the toy away from direct heat. Do not submerge the toy in water. This can damage the electronic assemblies.
SPECIAL NOTE TO ADULTS
Regularly examine for damage to the plug, enclosure and other parts. In the
event of any damage, the toy must not be used with the charger until the
damage has been repaired. This toy is not intended for children under 3 years
old. This toy must only be used with the recommended charger.
BATTERY SAFETY INFORMATION
Contains 1 x 6.4 V/500mAh lithium-ion battery, and requires 2 x 1.5 V AAA (LR03) batteries (not included). Batteries are small objects. Replacement of batteries must be done by adults. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the toy. Dispose of used batteries properly. Remove batteries for prolonged storage. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (i.e. alkaline/standard/rechargeable). Using rechargeable batteries is not recommended due to possible reduced performance. Rechargeable batteries are only to be charged under adult supervision. Replaceable-rechargeable batteries are to be removed from the toy before being charged. DO NOT recharge non- rechargeable batteries. DO NOT short-circuit the supply terminals.
PRODUCT BATTERY REMOVAL INSTRUCTIONS
Internal battery is factory installed and non-replaceable.
Product disassembly and battery removal must be performed by an adult. Do not
puncture, cut, tear, compress or deform product during disassembly. Ensure
product is turned off, then use a screw driver to remove all screws. Separate
product body halves to expose internal electronics. When battery is visible in
its entirety use scissors to cut a single battery wire, immediately wrap the
cut wire end with tape to isolate it, repeat until all battery wires are cut
and isolated, and the battery is free from the rest of the product. Dispose of
battery in accordance with your local battery recycling or disposal laws.
Contains 1 lithium-ion 6.4 V/500mAh battery and requires 2 x 1.5 V AAA
(LR03) batteries (not included).
Batteries or battery packs must be removed for recycling and proper disposal.
When this
product has reached the end of its useful life, it should not be disposed of
with other household waste. EU legislation for Electrical and Electronic
Equipment and Batteries, requires these to be separately collected so that
they can be treated using the best available recovery and recycling
techniques. This will minimize the impact on the environment and human health
from soil and water contamination by any hazardous substances, decrease the
resources required to make new products and avoid using up landfill space.
Please do your part by keeping this product out of the municipal waste stream!
The “wheelie bin” symbol means that it should be collected as “waste
electrical and electronic equipment”. You can return an old product to your
retailer when you buy a similar new one. For other options, please contact
your local council.
FCC STATEMENT
This device complies with Part 15 & 18 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class B digital devices / an ISM device pursuant to Part 15 / Part 18 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference to radio communications. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this toy does cause interference to radio or television reception (you can check this by turning the toy off and on while listening for the interference), one or more of the following measures may be useful:
- Reorient or relocate the receiving antenna
- Increase the separation between the toy and the radio or the TV
- Consult the dealer or an experienced TV-radio technician for help.
NOTE: Changes, adjustments or modifications to this unit, including but not limited to, replacement of any transmitter component (crystal, semiconductor, etc) could result in a violation of FCC rules under part 15 and/or 95 and must be expressly approved by Spin Master Ltd or they could void the user’s authority to operate the equipment. Spin Master Inc., PMB #10053, 300 International Drive, Suite 100, Williamsville, NY 14221. To contact the responsible party please visit fcc.spinmaster.com.
CANADIAN Class B statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Spin Master International B.V. hereby declares that the radio equipment type MONSTER JAM EL TORO LOCO® WITH SMOKE EFFECTS is in compliance with Directive 2014/53/EU and Radio Equipment Regulation 2017. The full text of the declaration of conformity is available at the following internet address:
Frequency Band(s): 2420 MHz – 2465 MHz / Maximum radio frequency power
transmitted: < 10dBm
Before first use: Read the user’s information together with your child
For in-depth video instructions go to MONSTERJAMRC.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>