HONGHOO 0YH-04YH-000M1 Body Camera User Manual

: June 16, 2024
: HONGHOO

Table of Contents

HONGHOO 0YH-04YH-000M1 Body Camera User Manual
l Schematic diagram of products
l Introductions to indicator light
l Function and operation instructions Boot:
Photo:
Video:
Night vision:
Motion detection:
Reset:
Power-off:
Charging:
Charging while recording:
Time modifying setting:
**Notes: After the text document is modified once, the time is
Service:
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HONGHOO 0YH-04YH-000M1 Body Camera User Manual

l Schematic diagram of products

Product Features

Portable recorder HD 1080P
Ultra-wide lens
High-intensity dark night vision
Support continuous recording for 360 minutes
Support loop recording
Support motion detection

l Introductions to indicator light

Blue light: Boot/Standby/Video/Photo indicator light Yellow light: Infrared indicator light

Green light: Motion detection indicator light Red light: Charge light

l Function and operation instructions Boot:

Press the “power on” button, the blue light turns on and the machine starts successfully. The blue light with card flashes once and then the light turns on for a long time and the machine enters the standby mode. The card-free blue light flashes for 3 times and the machine will shuts down automatically after 1 minute in standby mode without using any function.

Photo:

In standby mode: Click and press the photo button once and the blue light flashes once to take one photo and save it automatically.

Video:

In standby mode: Click and press the video button once and the blue light flashes slowly to enter the video mode. The continuous recording will be automatically in sections each 5
minute. When the card is full, the earlier video will be overwritten by new video. Press the video button again once to stop recording.

Night vision:

In standby mode: click and press the power button again, the yellow light will be on.Short-press the power button again and the infrared light will also be off.

Motion detection:

In standby mode: press the video button for three seconds and the green light turns on. If the object is detected to move, the green light will slowly flash and continue recording 1 minuter.

Reset:

When the machine crashes, no button work and the machine can not be used normally, you can press the photo key and the boot key to reset the machine.

Power-off:

In standby mode: Long-press the power button for 3 seconds. The blue light flashes 3 times to shut down the machine.

Charging:

Charging: The red lights flashing; Fully charged:Red lights solid.
The charging indicator light is on the left side of the micro port at the end of the device.

Charging while recording:

Insert the TF card and the external USB cable. With the external 5V USB power supply or the charger (mobile power supply), the machine can directly into the video recording mode. With no manual stop, the recording process will always be on and videos will be circularly covered. You can manually stop recording and switch the the machine to any mode.

Time modifying setting:

The camera will automatically boot in the TF card root directory to create an TXT document(Figuretime.txt).
Using a card reader on your computer to insert micro SD card to modify the time as follows:
Open the text document(Time.txt). You can edit the time as needed and save the file. The TF card is inserted into the camera, and the time settings is completed.
Using the camera is connected the computer with a USB cable to change your time as follows:
Open the text document(Time.txt). You can edit the time as needed and save the file.The camera is turned off and then turned on again so that the time can be modified.
The reference time format(year/month/day/hour/minute/second) 20191001235959 Y (with time watermark)20191001235959 N (without time watermark)
Difference between Y and N at the end of time: time display and no time display

**Notes: After the text document is modified once, the time is

automatically updated when you record a video for each subsequent operation. If you open the time document again, you will see the same time (20191001235959). Don’t worry about it. It’s just a time program. You just need to modify the time that you want and save it. The recording time will be updated automatically**.

Relevant parameters

Items	Relevant parameters
Video format	AVI
Video decoding	M-JPEG
Resolution	1920×1080P
Video frame rate	30fps
Image scale	16:9
Photo resolution	4032×3024
Image format	JPG
Battery type	Built-in high-capacity polymer lithium battery
Battery capacity	1000mAh
Working hours	Photography can last for 360 minutes.
Charging voltage	DC-5V

Supporting storage	Supporting 256 TF card at maximum

Transmission

speed

| High-speed USB2.0
Interface type| Micro USB
Supporting

systems

| Windows; Mac Os; Linux
Media player| System-provided or mainstream audio and video player

software

Notes:

Charge the battery when it is used up. It takes two to three hours to fully charge the battery. When the indicator light indicates that the battery is full, try to charge it for another 30 minutes to ensure that the battery is fully charged.
It is normal if the product has some heating status. Please do not worry about defective products. All our products have gone through a long aging test to ensure that there is no quality problem before delivery.